• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.768-776
• /
• 2010

This study was conducted to predict number and fresh weight of leaves, and total leaf area of a single-stemmed rose 'Vital' based on the accumulated thermal units, and to develop a model of shoot development for the prediction of the time when the flowering shoot reaches a phenological stage in a plant factory system. The base temperature ($T_b$), optimum temperature ($T_{opt}$), and maximum temperature ($T_{max}$) were estimated by regressing the rate of shoot development against the temperature gradient. The rate of shoot development ($R$, $d^{-1}$) for the phase from cutting to bud break (CT-BB) was best described by a linear model $R_b$ ($d^{-1}$) = -0.0089 + $0.0016{\cdot}temp$. The rate of shoot development for the phase from bud break to harvest (BB-HV) was fitted to the parabolic model $R_h$ ($d^{-1}$) = $-0.0001{\cdot}temp^2$ + $0.0054{\cdot}temp$ - 0.0484. The $T_b$, $T_{opt}$, and $T_{max}$ values were 5.56, 27.0, and $42.7^{\circ}C$, respectively. The $T_b$ value was used in the thermal unit computations for the shoot development. Number of leaves, leaf area (LA), and leaf fresh weight showed sigmoidal curves regardless of the cut time. The shoot development and leaf area model was described as a sigmoidal function using thermal units. Leaf area was described as LA = 578.7 $[1+(thermal units/956.1)^{-8.54}]^{-1}$. Estimated and observed shoot length and leaf fresh weight showed a reasonably good fit with 1.060 ($R^2=0.976^{***}$) and 1.043 ($R^2=0.955^{***}$), respectively. The average thermal units required from cutting to transplant and from transplant to harvest stages were $426{\pm}42^{\circ}C{\cdot}d$ and $783{\pm}24^{\circ}C{\cdot}d$, respectively.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.133-139
• /
• 1988

For the development of a general mathermatical model to predict the density of liquid foods based on temperature and composition of each major component, the major components of liquid foods considered in this study were water, protein, fat, carbohydrate, fiber and ash. These samples were subdivided into sixteen pure components. The density of each sample was measured by a volumetric pycnometer at the temperature range of $0^{\circ}C\;to\;100^{\circ}C$ for three different solid content suspensions, The density values of pure component solids were calculated from the assumed model at given temperature, using the experimental values of three different solid content suspensions with known water fraction and density model of water. Using these calculated density data at the temperature range of $0^{\circ}C\;to\;100^{\circ}C$, the coefficients of ther density model for each pure component were determined by the OPT Subroutine Program. The density model developed in this study can be used to predict the density values of liquid foods at given temperature and composition.

• Plant Resources
• /
• v.7 no.2
• /
• pp.136-140
• /
• 2004

Co-segregation of male fertility with DNA markers selected by RAPD analysis as being potentially linked to the restorer gene (Rf) for Cytoplasmic male sterility (CMS) was analyzed using segregating F2 population. One RAPD marker directly linked to the Rf locus was identified. Amplification of OPT-02/570 using the STS primers generated a monomorphic band of each fertile plants randomly selected F2 progenies. From these results, this specific marker would be strongly linked to be restoring gene. The use of STS marker is effective in overcoming the reliability of the RAPD phenotype and improving their utility for MAS, co-dominant STS markers are especially very useful.

• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.3
• /
• pp.227-233
• /
• 2010

In this study, a genetic algorithm was utilized to optimize the stacking sequence of a composite plate subjected to a high velocity impact. The aim is to minimize the maximum backplane displacement of the plate. In the finite element model, we idealized the impactor using solid elements and modeled the composite plate by shell elements to reduce the analysis time. Various tests were carried out to investigate the effect of parameters in the genetic algorithm such as the type of variables, population size, number of discrete variables, and mutation probability.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.327-329
• /
• 2008

We have studied the optically compensated splay (OCS) mode using reactive mesogen monomer to reduce critical voltage, setting voltage and phase transition time from initial bend to splay state. The high pretilt angle from vertical alignment was formed through the polymerization of UV curable RM monomer at the surfaces. In this way, orientation of the LC with OCS can be achieved without setting voltage.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.3
• /
• pp.249-258
• /
• 2005

Recently, the vibration reduction at a local structure such as compass deck has been continuously requested by ship owner and shipbuilder. Because crews are afflicted with vibration, severe vibration problems even bring about a damage of structure. This study conducted to get an optimized stiffener size of compass deck to reduce the vibration level and decrease the weight of structure in ship. NASTRAN external call type optimization software (OptShip) which makes use of NASTRAN as a solver is used as an optimization tool. The results indicate that the optimum design is promising for real applications.

• IE interfaces
• /
• v.20 no.1
• /
• pp.58-68
• /
• 2007

This research deals with a vehicle scheduling problem for the sludge collection strategies which might be solved via quantitative analysis and cost evaluations schemes. This problem can be modeled as a kind of capacitated vehicle routing pick-up problems. With the aim of establishing operation schedule of vehicles and analyzing the total cost under considering various assumptions and realistic restrictions of the sludge collection problem, we propose a heuristic method based on the genetic algorithm in conjunction with the sweep algorithm and the 4-opt algorithm. Finally, we present the cost effective operation schedule that can be used as the managing tool for the sludge treatment plant of the multi-purpose dam.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.56-59
• /
• 1996

Worst-case state estimation will be proposed in this paper. By using the worst-case disturbance and worst-case state estimation, we can obtain right/left constrained coprime factors. If constrained coprime factors are used in designing a controller, the infinity-norm of closed-loop transfer matrix can be smaller than any constant .gamma.(> .gamma.$_{opt}$) without matrix dilation optimization. The derivation of left/right constrained coprime factors is achieved by doubly coprime factorization for the plant constrained by the infinity norm. And the parameterization of stabilizing controllers gives us easily understanding for H$_{\infty}$ control theory.ry.

• Journal of Trauma and Injury
• /
• v.28 no.1
• /
• pp.51-54
• /
• 2015

The incidence of foreign body insertion in the anorectum is rare, however, it is increasing, especially in urban populations. Foreign objects in the anorectum can be of different sizes, shapes and materials. Frangible objects like glass or beakers, and sharp foreign bodies that may easily injure the bowel mucosa are particularly dangerous. Physicians have to consider more innovative options on how to extract these foreign bodies without inciting injury; and, if injury would occur, consider different techniques to repair it, whether transanally or transabdominally, and opt for primary repair, or resection with either anastomosis or stoma creation. Here, I introduce our cases with colorectal foreign bodies and present several literatures to help physicians decide when presented with cases like these.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.6
• /
• pp.2087-2103
• /
• 2014

What is an ideal authentication method for smartphone banking services? And what are the critical elements to be considered when designing it? To provide valuable insight for these questions, this study investigates various authentication requirements to be considered in smartphone banking service with the aspect of security, convenience and cost. By applying Analytic Network Process (ANP), this study first analyzes priorities among the requirements and then draws an ideal authentication method for smartphone banking service. Moreover, a sensitivity analysis has been conducted by varying the relative importance of several requirements. The results from the judgment of 72 experts revealed that, although Korean government has obliged the use of Public Key certificate, OPT and biometric alternatives may prove to be more appropriate for the smartphone banking service. These results will contribute to the provision of more secured and convenient smartphone banking services.