• Journal of Communications and Networks
• /
• v.3 no.4
• /
• pp.317-323
• /
• 2001

Traditional configuration management involves complex labor-intensive processes performed by experts. The configuration tasks such as installing or reconfiguring a system, provisioning network services and allocating resources typically involve a large number of activities involving multiple network elements. The network elements may be associated with proprietary configuration management instrumentation and may also be spread across heterogeneous network domains thereby increasing the complexity of configuration management. This paper introduces an architecture for the self-configuration of networks (SELFCON). The proposed architecture involves a directory server, which is uses to maintain configuration information. The configuration information stared in the directory server is modeled using the standard DEN specification thereby allowing effective exchange of network, system and configuration management data among heterogeneous management domains. SELFCON associates configuration intelligence with the components of the network, rather than limit it to a centralized management station. The network elements are notified about related changes in configuration policies, based upon which, they perform self-configuration. SELFCON is able to provide automation of configuration management and also an effective unifying framework for enterprise management.

• Journal of Aerospace System Engineering
• /
• v.9 no.4
• /
• pp.8-15
• /
• 2015

Unmanned Aircraft System(UAS) is a huge and complicated system that is composed of UAV, ground control system, datalink system, and mission equipments. We have applied system engineering to development of UAS. Configuration management is very important activity for efficient developments. The Configuration management process comprises four distinct disciplines (Configuration identification, Configuration control, Configuration status accounting, and Configuration audit). This paper explains the configuration management system of UAS development project which ADD executes and introduces several examples of these four disciplines.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.929-930
• /
• 2007

박막재료 및 반도체의 면저항 측정에는 주로 Four Point Probe(FPP) 원리를 이용한 측정기를 사용하고 있다. FPP에 의한 측정방식은 single 및 dual configuration method가 있으며, dual configuration은 single configuration에 비해 probe spacing 변화나 시료의 가장자리 효과 등에서 측정편차가 적은 장점이 있어서 dual configuration 기술을 사용하는 추세이다. 개발된 휴대용 면저항 측정기는 dual configuration원리를 적용하여 제작되었으며, 박막재료의 면저항을 누구나 쉽고 정확하게 측정할 수 있도록 설계되었다. 또한 시료의 크기가 핀 간격에 비해 5배 이상 크면 보정계수를 거의 무시할 수 있는 장점이 있어 작은 시료라도 정확한 면저항을 측정할 수 있다. 이측정기의 측정 불확도는 지시값의 1 % 이하이고, 측정범위는 (2$\sim$2000)$\Omega/sq$이다.

• Journal of the Korean Chemical Society
• /
• v.20 no.2
• /
• pp.111-117
• /
• 1976

The configuration and conformation of methyl benzamidoxime have been studied from extended Huckel molecular orbital calculations.The results show that the E-configuration of the C=N double bond is favored compared with that of Z-configuration with the sp-conformation of the C-N bond rotamers, but Z-configuration is more stable with the ap-conformation of the C-N bond rotamers. The conformation of C-N bond with equal configuration of C=N bond and equal conformation of N-O bond, sp-form is favored, but the conformation of N-O bond with equal configuration and equal conformation of C-N bond ap-form is more stable. The major part of the stabilization energies can be accounted for by the electrostatic energies between the atoms involved.

• Nuclear Engineering and Technology
• /
• v.35 no.6
• /
• pp.547-555
• /
• 2003

Fire hazard and risk analysis at Nuclear Power Plants is implemented on the basis of the normal operational configuration. This steady configuration, however, can be changed due to the temporary displacement of equipment, electric cable and irregular movement of workers through the fire compartments when the on-line maintenance is processed during the power operation mode or the scheduled outage mode for the refueling. With the consequence of this configuration change, the fire analysis condition and the evaluation result will be different from those that were analyzed based on the steady configuration. In this context, at this paper, the general items for the reassessment are categorized when the configuration has changed. The contemporary zone models for the detail fire analysis are also illustrated for their application for each classified condition.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.116.4-116
• /
• 2001

We consider a robust configuration problem of inertial sensors for inertial navigation system(INS). Fault detection and isolation(FDI) is necessary to improve reliability of the system. For FDI, there used to be more than three mutually orthogonal sensors and thus we have to consider configuration methods of sensors. Various studies in this area have been done, but the former results did not consider effect of uncertainty(misalignment, scale factor error) to determine the configuration of the sensors. In this paper robust configuration of sensors is proposed through sensitivity analysis. Also total least square(TLS) method ...

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.463-474
• /
• 2019

This paper presents the effect of winding configuration on the kVA rating of a wye-connected autotransformer applied to a 12-pulse rectifier. To describe the winding configuration of the wye-connected autotransformer, position and proportional parameters are defined and their quantitative relation is calculated. The voltages across and currents through the windings are measured under different winding connections. Consequently, a relation between the kVA rating and position parameter is established in accordance with the analysis, and the optimal winding configuration is obtained on the basis of this relation. A wye-connected autotransformer with the least equivalent kVA rating and simplest winding configuration is designed and applied to the 12-pulse rectifier. Simulations and experiments are conducted to validate the theoretical analysis.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.1131-1136
• /
• 2008

The electrical repulsive energy between two model cylinders was calculated by solving nonlinear Poission- Boltzmann (P-B) equation under Derjaguin approximation. Effects of the surface potential, Debye screening length, and configuration of cylinders on the repulsive interaction energy were examined. Due to the anisotropy of the shape of cylinder, the interaction repulsive energy showed dependence to the configuration of particles; cylinders aligned in end-to-end configuration showed largest repulsive energy and crossed particles had lowest interaction energy. The configuration effect is originated from the curvature effect of the interacting surfaces. The curved surfaces showed less repulsive energy than flat surfaces at the same interacting surface area. The configuration dependency of interaction energy agreed with the previous analytical solution obtained under the linearized P-B equation. The approach and results present in this report would be applicable in predicting colloidal behavior of cylindrical particles.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.315-316
• /
• 2006

As IEC 61850 based substation automation technology is emerging globally, there are many efforts to implement and apply this IEC 61850 standard to substation automation area. IEC 61850 based substation supports ethernet network, standard data model and SCL(substation Configuration Language), etc. These features can provide enough environment to make applied technology which can substitute the legacy relay trip logic configuration method(PLC or Local area reconstruction) to XML based configuration method. This paper suggests new IED trip logic configuration method. The XML based trip logic configuration method can be established using SCL technology And IED trip logic reconfiguration from remote center can be possible under ethernet based technology

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.2
• /
• pp.108-115
• /
• 2019

The activities of managing and controlling the configuration of a system component over its life cycle are critical tasks in developing a high safety system as well as general system development. These configuration management activities should be defined through the management plan at the beginning of the life cycle, and should be performed continuously and systematically until the end of the project after the system or product development is completed. In this study, the configuration management process applied in the development of high safety railway signaling system was introduced and an efficient application proposals of it was proposed. In particular, configuration management through the establishment of a configuration management system based on computer tools is one of the important activities of maintaining the configuration integrity of the system or product.