• Information Systems Review
• /
• v.7 no.1
• /
• pp.41-63
• /
• 2005

Due to the fast development of information technology, a variety of edutainment software has been used in the field of business education. One of them is Business Simulation Game that the business game domain and the information technology is definitely associated. A lot of business simulation game have been developed and used for many courses of colleges and corporate training in USA and EU. However, education program based on business simulation game has not been activated in Korea. This paper introduce a business simulation game developed by joint effort of business professors and a software firm for last three years and suggest the method of business education using this business simulation game. First of all, the development process, architecture and procedure of business simulation game are summarized. From a perspective of business education, the effect and advantage of business simulation game, sample syllabus, course outlines, users, missions and evaluation method are also addressed.

• Nuclear Engineering and Technology
• /
• v.45 no.4
• /
• pp.427-438
• /
• 2013

In this paper we discuss spent fuel management options in the Republic of Korea (ROK) from two interrelated perspectives: Centralized dry cask storage and spent fuel pyroprocessing and burning in sodium fast reactors (SFRs). We argue that the ROK will run out of space for at-reactors spent fuel storage by about the year 2030 and will thus need to transition centralized dry cask storage. Pyroprocessing plant capacity, even if approved and successfully licensed and constructed by that time, will not suffice to handle all the spent fuel discharged annually. Hence centralized dry cask storage will be required even if the pyroprocessing option is successfully developed by 2030. Pyroprocessing is but an enabling technology on the path leading to fissile material recycling and burning in future SFRs. In this regard we discuss two SFR options under development in the U.S.: the Super Prism and the Travelling Wave Reactor (TWR). We note that the U.S. is further along in reactor development than the ROK. The ROK though has acquired more experience, recently in investigating fuel recycling options for SFRs. We thus call for two complementary joint R&D project to be conducted by U.S. and ROK scientists. One leading to the development of a demonstration centralized away-fromreactors spent fuel storage facility. The other involve further R&D on a combined SFR-fuel cycle complex based on the reactor and fuel cycle options discussed in the paper.

• Journal of the Korea Convergence Society
• /
• v.13 no.4
• /
• pp.635-641
• /
• 2022

Although social economy organizations have achieved quantitative growth in various types and fields, they have been mainly promoted by the government, and there is still room for qualitative improvement, such as institutional reorganization, support systems and support methods, compared to advanced countries. In this study, the problems of social economy organizations, the current status and actual analysis of social economy organizations, the policy delivery system, obstacles to the development of social economy organizations, and problems of activation, etc. were reviewed through previous studies. Through this, policy directions and tasks for revitalization of future social economy organizations were presented. As a result, the policy direction for revitalization of social economy organizations requires private and local government initiatives, expansion of fields, customized support for the creation of a growth ecosystem, and various linkage cooperation. Organizational capacity development and education, reinforcement of various linkage cooperation systems, creation of an investment ecosystem, and joint market development are necessary.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.3
• /
• pp.369-382
• /
• 2011

The purpose of this study was to verify the validation of exercise effect with loading deviation during rowing exercise. We performed evaluation of based physical fitness and joint torque before the experiment for finding muscle unbalance. So we recruited twenty four subjects who have bigger muscle strength in more 20% than average one. Subjects divided two groups. One is dominant upper limbs(DU) and the other was dominant lower limbs(DL). Subjects performed rowing exercise using electric equipment (Robo.gym.Humonic.korea). Exercise is performed four sets a day including 25 times a set, and three days a week. Measurement consist of evaluation of based physical fitness and joint torque using biodex(biodex system3.USA). Evaluation of exercise effect performed each week in joint torque of shoulder, lumbar and knee joint and each month in based physical fitness. Also we adapted 30% of 1RM for muscular endurance and 70% of 1RM for muscle strength as exercise load. The results showed that the difference of maximal peak torque were getting increase significantly during exercise. Also difference of various factor in based physical fitness were getting increase significantly except flexibility and agility. This interpreted that rowing exercise with loading deviation types could provide muscle strength and muscular endurance exercise in same time. These results could be interpret to two ways. One is effect of improving physical fitness for rowing exercise and the other meaned validation of loading deviation in rowing exercise. Our study is going to verify the validation of loading deviation during rowing and we found out that loading deviation could provide muscle strength and muscular endurance exercise for improving muscle unbalance. Our study can be used development of exercise equipment and program for normal people with muscle unbalance. Also that provide effect of whole body exercise to anybody.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.25-36
• /
• 2016

The goal of the SmartGrid is to maximize energy efficiency by exchanging bi-directional real-time power information with the help of ICT(Information and Communication Technology). In this paper, we propose a "JRS-MS" (Joint Routing and Scheduling for Multi-channel SmartGrid) algorithm that uses numerical modeling methods in IEEE 802.11s based STDMA multi-channel SmartGrid NAN networks. The proposed algorithm controls the amount of data transmission adaptively at the link layer and finds a high data-rate path which has the least interference between traffic flows in multi-channel SmartGrid NAN networks. The proposed algorithm improve transmission performance by enhancing network utilization. By comparing the results of performance analysis between the proposed algorithm and the JRS-SG algorithm in the previous paper, we showed that the JRS-MS algorithm can improve transmission performance by maximally utilizing given network resources when the number of flows are increasing in the multi-hop NAN wireless mesh networks.

• PNF and Movement
• /
• v.21 no.2
• /
• pp.171-183
• /
• 2023

Purpose: The purpose of this study was to compare universal goniometry (UG), which is commonly used in clinical practice to measure the range of motion (ROM) of finger joints with a wearable soft sensor glove, and to analyze the reliability to determine its usefulness. Methods: Ten healthy adults (6 males, 4 females) participated in this study. The metacarpophalangeal joint (MCP), interphalangeal joint (IP), and proximal interphalangeal joint (PIP) of both hands were measured using UG and Mollisen HAND soft sensor gloves during active flexion, according to the American Society for Hand Therapists' measurement criteria. Measurements were taken in triplicate and averaged. The mean and standard deviation of the two methods were calculated, and the 95% limits of agreement (LOA) of the measurements were calculated using the intraclass correlation coefficient (ICC) and Bland-Altman plot to examine the reliability and discrepancies between the measurements. Results: The results of the mean values of the flexion angles for the active range of motion (AROM) of the finger joints showed large angular differences in the finger joints, except for the MCP of the thumb. In the inter-rater reliability analysis according to the measurement method, the ICC (2, 1) value showed a low level close to 0, and the mean difference by the Bland-Altman plot showed a value greater than 0, showing a pattern of discrepancy. The 95% LOA had a wide range of differences. Conclusion: This study is a preliminary study investigating the usefulness of the soft sensor glove, and the reliability analysis showed a low level of reliability and inconsistency. However, if future studies can overcome the limitations of this study and the technical problems of the soft sensor glove in the development stage, it is suggested that the measurement instrument can show more accurate measurement and higher reliability when measuring ROM with UG.

• Journal of Technologic Dentistry
• /
• v.34 no.3
• /
• pp.303-314
• /
• 2012

Purpose: This study aimed to find overseas workplace and improve global competence through the preference survey on overseas employment by dental technology students. Methods: The survey sample consisted of 250 randomly selected dental technology students. Survey was conducted from March 1 to May 1 in 2012. Total of 245(98.0%) replies and analyzed 236 questionnaires excluding 9 incomplete questionnaires. The questionnaires used in this study consisted of 7 items for general information, overseas employment characteristics of 10 items, 7 items for overseas employment activation plane and job competency development of 7 items. Collected data were analyzed using SPSS(Statistical Package for Social Sciences) Win 19.0 statistics program. Results: Regarding general characteristics of the subjects, there were 131 third graders(55.5%), 63 first graders(26.7%) and 42 second graders(17.8%) among 130 males(55.1%) and 106 females(44.9%). 221(93.6%) of the subjects had no experience in language training. Students who had clinical training for 1-5 months were 123(52.1%), and 24(10.2%) students had more than six months. 89(37.7%) of the subjects had no clinical training. 155(65.7%) of the subjects hope to work with korean owner, and 81(34.3%) chose foreign owner. Favored working countries were Australia(41.5%), the United States(29.2%), Canada(18.2%) and other(11.0%). The field of dental ceramic was indicated to be the highest proportion of 104(44.1%). Period of training were 3 hours(40.3%) and 6 hours(35.2%). The most important training were language-centered education(54.2%), Job-oriented education(24.2%), local culture education(16.1%), other(3.0%) and Leadership Training(2.5%). The subjects chose overseas worker(44.9%), working-level practitioner (28.8%), successfully employed dental technology graduate(19.5%a) and professor(3.4%) as an instructor. The subjects get education and training information from professor(40.3%), other(28.0%), senior(14.4%), job site(8.9%) and acquaintance(8.5%). A credit exchange(2.46 points), a joint degree program(2.46 points), and a foreign professor(2.33 points) were needed to activate the overseas employment. A kind of dental prosthesis(3.58 points), carving tooth morphology(3.38 points), and majors of dental technology(3.30 points) were indicated to develop job competency for overseas employment. Age, year, clinical training experience and company owner were statistically meaningful data among the general characteristics affecting job competency development. Conclusion: The college needs to offer variety programs such as foreign language-centered education and a local job competency development program to graduates to be connected with international workplace and employment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1143-1150
• /
• 2012

This paper reviewed the general definition and role of salvage duty, and performed competency analysis based on the present state of ROK Navy's and Korean civilian's salvage operation. Also, to enhance the national salvage ability, the salvage system of advanced maritime nations such as America, Great Britain were studied. Putting these information together, it is concluded that for the expansion and development of Korean salvage system, the nationally combined salvage assets must be utilized for civilian salvage operations and internationally recognized diving certification system should be introduced and joint organization of civilian-government-Navy should be established to enable the execution of such plans.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2171-2172
• /
• 2006

Magnetic nerve stimulation treatment is much backward real condition than other field. Specially, successful medical treatment introduction of magnetic field (MF) can was refered long ago in Avicenna's work, and is thought as age of medicine magnetology development recently. These development is achieved through biologist and biophysicist and clinician's joint effort, but, new mountings and relationship air tassel are developed steadily. Magnetic nerve stimulation treatment field designs treatment system by each function during long wave high-amplitude (traditional magneto therapy of greatly great that strong that) short time that CMF, VMF, PMF field etc. are representative but are HPMT technology in this research and manufacture and special quality did comparative analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.93-100
• /
• 1993

With increasing technology, requirement to car noise and related dynamics are getting competitive keypoint. Unfortunately, vibro - acoustic behavior of a car is nowadays only possible after development of prototypes. But, obviously, in the Area of Research, many of Industrials, Universities and research centers try to codevelop the design tools to predict the vibro-acoustic behaviors. At this stage, it is more realistic to represent the existing technologies in order for the engineer to get their own know-how to design and to Integrate existing techniques, to setup their test facility, and to develope some tools with which they can successfully predict noise levels of car in the design phase. Moreover, most of the theories which will be represented in this paper can be used in the design phase. At any way, finding the cause of trouble shooting is more urgent than the design of a car to the test engineer. In this paper, transfer path analysis, noise source identification, and the key test method of modal analysis is introduced. Later, if I get the opportunity to present in KSNVE, the approach method of modal analysis is introduced. Later, if I get the opportunity to present in KSNVE, the approach method of finding characteristics of joint and welding part will be introduced. Most parts of this paper was quoted from the papers of LMS.