• Journal of Korean Society of Rural Planning
• /
• v.29 no.4
• /
• pp.69-79
• /
• 2023

This study investigated changes in the spatial structure of rural villages in Sayang Village, where accessibility restrictions to island areas were improved, and analyzed the spatial composition of houses according to changes in the living environment. First, despite the island's vulnerable transportation requirements being resolved by the completion of the land and bridge in 2018, the local economy continues to stagnate due to a vicious cycle of local living services and job losses. Second, when a survey of residents' changed living services was conducted through the continuation of the specification map, the scope of living areas was expanded by analyzing the frequency and place of visit of fresh food purchases, use of convenience facilities, and medical visits. Third, it is judged that the naturally formed village is composed of small roads to the inside of the village due to the disorganized street system and the form of walking instead of vehicles. Finally, as a result of analyzing the residential space of houses in fishing villages, the aging rate of houses over 30 years old was 62 (91.2%), and the average area of the first house space built was 65.2m² to 14.1m², an increase of 17.8% of the total area.

• 대한공업교육학회지
• /
• v.40 no.2
• /
• pp.155-174
• /
• 2015

The purposes of this study were to analyze the property of educational needs of teachers for educational contents of invention and intellectual property in secondary vocational education and provide fundamental data for the development of job training programs so as to develop the capabilities of teachers, the base for effective education of invention intellectual property in secondary vocational education. To achieve them, educational needs for the educational contents of invention intellectual property and the priority of the educational needs in secondary vocational education based on the recognition of the teachers were analyzed and suggested. Concrete results of this study can be suggested as follows. First, the average of educational needs of the teachers for the educational contents of invention intellectual property in secondary vocational education was 5.02. There were 23 items of the educational contents whose educational needs were higher than the average of the whole items and for those items and the average of each item, there were F4(The average of patent applications) 6.72, F5(Modification and supplementation of specification sheets) 6.46, F2(Writing of patent floor plans) 6.39, F3(Writing of patent specification sheets and abstraction) 6.31, A5(Invention method and activity) 6.27, E6(Invention design project) 6.15, H3(Invention commercialization) 5.97, F1(Patent information and application) 5.90, E5(Design obligation) 5.78, E3(Designing process of inventional design) 5.77, A4(Invention and problem solving) 5.57, G2(Patent investigation and classification) 5.47, C2(Thinking method of inventional problem solution) 5.45, E4(Production of inventional design product) 5.45, B5(Inventional patent project) 5.42, A2(Creativity development) 5.26, C4(Inventional problem solving project) 5.26, H4(Invention marketing) 5.26, H2(Analysis on invention commercialization) 5.20, D4(Invention and management) 5.16, C3(Problem solving activity) 5.14, E2(Inventional design devise and expression) 5.11, B3(Actuality of inventional method) 5.08 in order. Second, for the priority of educational needs of the teachers for the educational contents of invention intellectual property in secondary vocational education, there were 13 items of the educational contents for the first rank, 10 for the second rank and 17 for the third rank. The items of the educational contents for the first rank were A4(invention and problem solving), A5(inventional method and activity), B5(Invention patent project), C2(Thinking method of inventional problem solution), C4(Inventional problem solving project), E3(Inventional design process), E4(Production of inventional design product), E5(Design obligation), E6(Invention design project), F1(Patent information and application), F2(Writing of patent floor plan), F3(Writing of patent specification sheet and abstract), and H3(Invention commercialization. The items of the educational contents for the second rank were A2(Creativity development), B3(Actuality of inventional method), C3(Problem solving activity), D4(Invention and management), E2(Invention design devise and expression), F4(Range of patent demand), F5(Modification and supplementation of specification sheet), G2(Patent investigation and classification), H2(Analysis on invention commercialization), and H4(Invention marketing). The items for the third rank were the educational contents except the ones of the first rank and the second rank.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.7
• /
• pp.402-413
• /
• 2004

This paper presents an Implementation of Korean standard 128-bit block cipher SEED for the small (8 or 16-bits) embedded system using a low-cost FPGA(Field Programmable Gate Array) chip. Due to their limited computing and storage capacities most of the 8-bits/16-bits small embedded systems require a separate and dedicated cryptography processor for data encryption and decryption process which require relatively heavy computation job. So, in order to integrate the SEED with other logic circuit block in a single chip we need to invent a design which minimizes the area demand while maintaining the proper performance. But, the straight-forward mapping of the SEED specification into hardware design results in exceedingly large circuit area for a low-cost FPGA capacity. Therefore, in this paper we present a design which maximize the resource sharing and utilizing the modern FPGA features to reduce the area demand resulting in the successful implementation of the SEED plus interface logic with single low-cost FPGA. We achieved 66% area accupation by our SEED design for the XC2S100 (a Spartan-II series FPGA from Xilinx) and data throughput more than 66Mbps. This Performance is sufficient for the small scale embedded system while achieving tight area requirement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.493-500
• /
• 2017

Co-operative education and internships are generally treated as an alternative way to increase the employment rate by resolving the mismatch between college education and the industrial needs of the job specification. Based on a questionnaire survey on Korean universities, this study examined the current status of programs and the operating mechanism for co-operative education and internship to provide policy suggestions for promoting the depth and width of co-operative education in Korean universities. The results of the survey shows that the majority of students carry out internships on a short-term basis and the universities usually lack the capabilities for effectively running the programs of co-operative education and internships. In particular, as a part of the academic curriculum, co-operative education should be focused on the balance and effective linkage between the occupations given to students and the majors in university.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.2
• /
• pp.15-24
• /
• 2018

Despite the recognition of the need for productivity information and its importance, the feedback of productivity information is not well-established in the construction industry. Effective use of productivity information is required to improve the reliability of construction planning. However, in many cases, on-site productivity information is hardly management effectively, but rather it relies on the experience and/or intuition of project participants. Based on the literature review and expert interviews, the authors recognized that one of the possible solutions is to develop a systematic approach in dealing with productivity information of the construction job-sites. It is required that the new system should not be burdensome to users, purpose-oriented information management, easy-to follow information structure, real-time information feedback, and productivity-related factor recognition. Based on the preliminary investigations, this study proposed a framework for a novel system that facilitate the effective management of construction productivity information. This system has utilized Sketchup software which has good user accessibility by minimizing additional data input and related workload. The proposed system has been designed to input, process, and output the pertinent information through a four-stage process: preparation, input, processing, and output. The inputted construction information is classified into Task Breakdown Structure (TBS) and Material Breakdown Structure (MBS), which are constructed by referring to the contents of the standard specification of building construction, and converted into productivity information. In addition, the converted information is also graphically visualized on the screen, allowing the users to use the productivity information from the job-site. The productivity information management system proposed in this study has been pilot-tested in terms of practical applicability and information availability in the real construction project. Very positive results have been obtained from the usability and the applicability of the system and benefits are expected from the validity test of the system. If the proposed system is used in the planning stage in the construction, the productivity information and the continuous information is accumulated, the expected effectiveness of this study would be conceivably further enhanced.

• Korean Security Journal
• /
• no.21
• /
• pp.155-175
• /
• 2009

RFID that provide automatic identification by reading a tag attached to material through radio frequency without direct touch has some specification, such as rapid identification, long distance identification and penetration, so it is being used for distribution, transportation and safety by using the frequency of 125KHz, 134KHz, 13.56MHz, 433.92MHz, 900MHz, and 2.45GHz. Also it is one of main part of Ubiquitous that means connecting to net-work any time and any place they want. RFID is expected to be new growth industry worldwide, so Korean government think it as prospective field and promote research project and exhibition business program to linked with industry effectively. RFID could be used for access control of person and vehicle according to section and for personal certify with password. RFID can provide more confident security than magnetic card, so it could be used to prevent forgery of register card, passport and the others. Active RFID could be used for protecting operation service using it's long distance date transmission by application with positioning system. And RFID's identification and tracking function can provide effective visitor management through visitor's register, personal identification, position check and can control visitor's movement in the secure area without their approval. Also RFID can make possible of the efficient management and prevention of loss of carrying equipments and others. RFID could be applied to copying machine to manager and control it's user, copying quantity and It could provide some function such as observation of copy content, access control of user. RFID tag adhered to small storage device prevent carrying out of item using the position tracking function and control carrying-in and carrying-out of material efficiently. magnetic card and smart card have been doing good job in identification and control of person, but RFID can do above functions. RFID is very useful device but we should consider the prevention of privacy during its application.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.2
• /
• pp.153-159
• /
• 2002

Objectives : To evaluate the accuracy of the registered cause of death in a county and its related factors. Methods : The data used in this study was based on 504 cases, in a county of Chonnam province, registered between January and December 1998. Study subjects consisted of 388 of the 504 cases, and their causes of death were established by an interview survey of the next of kin or neighbor and medical record surveys. We compared the registered cause of death with the confirmed cause of death, determined by surveys and medical records, and evaluated the factors associated with the accuracy of the registered cause of death. Results : 62.6% of the deaths were concordant with 19 Chapters classification of cause of death. external causes of mortality, endocrine, nutritional and metabolic diseases, neoplasms and diseases of the circulatory system showed the good agreement between the registered cause of death and the confirmed cause of death. The factors relating to the accuracy of the registered cause of death were the doctors' diagnosis for the cause of death (adjusted Odds Ratio: 2.67, 95% Confidence Interval: 1.21-5.89) and the grade of the public officials in charge of the death registry (adjusted Odds Ratio: 0.30, 95% CI=0.12-0.78). Conclusions : The accuracy of the registered cause of death was not high. It could be improved by using the doctors' diagnosis for death and improving the job specification for public officials who deal with death registration.