• 수산해양기술연구
• /
• 제50권2호
• /
• pp.147-153
• /
• 2014

The purpose of this paper is to examine the roll damping characteristics by bilge keels on the fishing vessel. Unlike other degree of freedom motions, roll motion is highly nonlinear. However the quantitative evaluation of roll damping combined with waves is very important for the fishing vessel. To reduce roll motion, roll motion stabilizers such as a bilge keel is used due to easy made and cheap cost rather than anti-rolling tank and fin-stabilizer. Authors paid attention to the shape of bilge keel and waves to grasp the roll damping for the fishing vessel and studied about the difference of tendencies of roll angle following the shapes of bilge keel. The model ship was the offshore large purse seiner and four types of bilge keel were used. The data from the experiments were provided and analyzed to investigate the rolling characteristics of the model ship being affected by the wave height, wave period and bilge keel shape. The results of the study showed that three types of the bilge keel have little effective, but only one has an effect on the roll damping. So bilge keel shape and its attachment method need to be a future study for the practical use in fishing vessel.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.30-40
• /
• 2005

Purpose. The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the incisal reduction (2.0mm, 2.5mm, 3.0mm) and axial inclination ($4^{\circ}$, $8^{\circ}$, $12^{\circ}$) of the upper canine. Material and methods. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and each crown was cemented on each metal die with resin cement. The cemented crowns mounted on the testing jig were inclined 30 degrees and the universal testing machine was used to measure the fracture strength. Results. 1. The fracture strength of the ceramic crown with 3.0mm depth and $12^{\circ}$ inclination was the highest (839N) Crowns of 2.0mm depth and $12^{\circ}$ inclination had the lowest strength (559N). 2. There was no significant difference in the fracture strength by axial inclination in the same incisal reduction group. 3. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the margin irrespective of incisal reduction.

• 한국세라믹학회지
• /
• 제42권11호
• /
• pp.749-752
• /
• 2005

When an electric field higher than a characteristic coercive field is applied to a ferroelectric such as $LiNbO_3$, the orientation of the spontaneous polarization is reversed, which causes the reversal of the sign of odd-rank tensor properties such as electro-optic and nonlinear optic coefficients. A fabrication process of insulator and periodic external field assisted poling of a z-cut $LiNbO_3$ have been optimized for a periodic $180^{\circ}$ phase inversion along z-axis. The poling jig and the poling control system, fully controlled by a computer, for high quality and reproducible PPLN fabrication have been devised. Periodically polarization reversed PPLN was adjusted based on the fabricated thickness of insulator. The poling structure of PPLN was observed under a microscope after etching PPLN samples by an etching solution ($HF:HNO_3$ = 1 : 2) for about 15 min.

• 접착 및 계면
• /
• 제16권2호
• /
• pp.76-82
• /
• 2015

SPG 막유화법에 의해 NIPAAm, MBA 및 APS를 용해시킨 수용액을 톨루엔과 미네랄오일의 혼합용액인 연속상에 HMP, Span80과 함께 유화(W/O emulsion)시킨 후, UV광중합법에 의해 PNIPAAm 하이드로젤 입자를 제조하였다. 연속상 내 미네랄 오일의 비율이 증가할수록, PNIPAAm 하이드로젤의 입도와 입자 내 PNIPAAm의 밀도가 증가하였으며, 이에 따라서 VPTT 근처에서 온도 변화에 따른 하이드로젤의 팽윤도($V/V_o$)도 크게 변화하였다. UV 광중합 시 $20^{\circ}C$에서는 속이 꽉찬 형태의 하이드로젤이 제조되었으나 LCST보다 높은 $40^{\circ}C$의 온도에서는 공동입자에서와 같이 하이드로젤의 외벽이 두껍게 형성되었다. 가교제인 MBA의 함량이 증가함에 따라서 가교도 및 입자 내 PNIPAAm의 밀도도 함께 증가하였다.

• 디지털융복합연구
• /
• 제9권1호
• /
• pp.89-106
• /
• 2011

With the development of the Internet, the media market is experiencing rapid change. The traditional form of offline newspaper markets, which has created the mainstream news delivery market, have been losing large amounts of power due to the emergence of online media. On the other hand, online media armed with its ability to post breaking news almost as it occurs has increased its influence and popularity at a rapid speed. However, since the exposure time and readership of online newspapers are less than their offline counterparts online media has a high dependence on sensational titles and somewhat exaggerating headlines rather than the objective and recapitulative headlines which are preferred. This paper will examine the function and significance of headlines, and conduct a comparative analysis on contents and forms of the headlines in offline newspaper and online newspaper in order to identify the characteristics of each newspaper. Through comparisons, it examines the types of headlines and the transference of headlines. In addition, it examines the differences in recognition of copy editors according to media in determining the headline, and it illuminates which type of headlines is preferred in order to instigate readers to read online newspapers. The analysis results of title-transferring cases in offline newspaper and online newspapers are that offline newspapers try to convey the contents accurately by making use of an information-transferring headline, while attention-attracting headline or subject-hiding headlines tend to be used for attracting the eye of readers. In addition, analysis results of headlines that are put on the top with a click counts in online newspapers are that attention-attracting headlines are the majority, while subject-hiding headlines that are hardly used in offline newspapers, are well-used in online newspapers. In an interview with copy editors, they responded that offline editors focus on the fact-transference in determining the title, while online editors put the weight on immediacy in the delivery of news and the function of guiding readers.

• 조명전기설비학회논문지
• /
• 제19권2호
• /
• pp.69-76
• /
• 2005

본 논문에서는 모의 GIS 내부에 유전체 파티클 들을 놓아둠으로서 전하의 축적과 전계의 집중이 용이하도록 하여 부분방전을 모의하였다. 이때 부분방전 발생과 진전에 따른 방사전자파를 스펙트럼 분석기와 $EMI{\cdot}EMC$ 측정용 안테나$(30\~2000(MHz))$를 사용하여 측정$\cdot$분석하였다. 모의 GIS내부에 유전체 파티클 존재에 따른 부력방전의 검출과 방진전전 과정의 판단을 위한 절연진단의 방법으로서 본 논문에서 제안한 측정 주파수의 대역의 분리와 데이터 측정과 분석법을 이용하면 부분방전의 검출과 방전과정의 판단이 가능함을 확인하였다.

• Composites Research
• /
• 제33권3호
• /
• pp.169-175
• /
• 2020

콘형 복합재 격자 구조체의 강성 평가를 위한 두 종류의 시편 단위 압축 및 인장 시험을 수행하였으며 유한요소해석 결과와 비교하였다. 구조체는 높이별로 반경이 변화하는 콘형이므로 단순 압축 및 인장 시험이 어려우므로 시험 수행이 가능한 형태의 시편 및 지그를 제작하여 시험을 수행하였다. 압축 시험이 가능하도록 단위 격자 구조체를 Subelement 형태로 가공하였으며, 압축 시험을 수행하여 측정된 섬유방향 압축 변형률을 유한요소해석 결과와 비교하여 헬리컬 리브의 강성을 확인하였다. 후프 리브의 강성 평가를 위해서는 구조체에서 후프 링 시편을 가공하여 인장 시험을 수행하였다. 후프 링에 인장 하중을 가하여 굽힘 변형이 크게 발생하도록 하였으며, 두께 방향 섬유체적비를 고려한 유한요소해석 결과와 비교하여 후프 리브의 강성을 확인하였다.

• Imaging Science in Dentistry
• /
• 제40권4호
• /
• pp.171-178
• /
• 2010

Purpose : The purpose of this study is to develop a surgical stent for dental implant procedure that can be easily applied and affordable by using cone beam computerized tomography (CBCT). Materials and Methods : Aluminum, Teflon-PFA (perfluoroalkoxy), and acetal (polyoxymethylene plastic) were selected as materials for the surgical stent. Among these three materials, the appropriate material was chosen using the CBCT images. The surgical stent, which could be easily placed into an oral cavity, was designed with chosen material. CBCT images of the new surgical stent on mandible were obtained using Alphard-3030 dental CT system (Asahi Roentgen Co., Ltd., Kyoto, Japan). The point of insertion was prescribed on the surgical stent with the multiplanar reconstruction software of OnDemand3D (CyberMed Inc., Seoul, Korea). Guide holes were made at the point of insertion on the surgical stent using newly designed guide jig. CBCT scans was taken for the second time to verify the accuracy of the newly designed surgical stent. Results : Teflon-PFA showed radiologically excellent image characteristics for the surgical stent. High accuracy and reproducibility of implantation were confirmed with the surgical stent. Conclusion : The newly designed surgical stent can lead to the accurate implantation and achieve the clinically predictable result.

• 대한두개안면성형외과학회지
• /
• 제21권3호
• /
• pp.166-170
• /
• 2020

Background: The standard treatment of nasal bone fractures in pediatric patients is closed reduction. Conservative treatment is sometimes performed, but poses a risk of nasal deformity. The aim of this study was to evaluate the outcomes of bone remodeling in pediatric nasal fractures. Methods: Information was extracted from the medical records of patients under 12 years of age who received conservative treatment for a nasal bone fracture and underwent follow-up computed tomography (CT) examinations. The initial fracture and its outcomes over time were graded as excellent, good, or fair according to the malalignment, displacement, or irregularity of the fractured segments. The outcomes of remodeling were evaluated through changes in the grade of the fracture between initial and subsequent CT scans. Results: The review identified 16 patients between March 2015 and December 2019. Their mean age was 6.2 years, and the average follow-up period was 4.9 months. Three of the five patients with a plane I frontal impact showed improved outcomes of remodeling from good to excellent, and the remaining two patients, improved from fair to good. Eight of the 11 patients with plane I lateral impacts showed improved outcomes, from good to excellent, while one patient, improved from fair to good, one patient, improved from fair to excellent, and one patient showed no interval changes. Conclusion: In 15 of these 16 patients with non-severe fractures, the bony contour improved through remodeling, without surgical intervention. Therefore, we suggest that conservative treatment is a feasible option for mild pediatric nasal fractures.

• 한국수소및신에너지학회논문집
• /
• 제10권2호
• /
• pp.131-139
• /
• 1999

The objective of this works was to synthesize the$Mg_2Ni$ hydrogen storage materials economically and to eliminate the intial activation process. $Mg_2NiH_x$ was mechanically alloyed under purified hydrogen gas atmosphere using pure Mg and Ni chips. M.A(Mechanical Alloying) was carried out using planetary ball mill for times varying from 12h to 96h under 20bars of hydrogen gas pressure. $Mg_2NiH_x$ started to form after 48h and the homogeneous $Mg_2NiH_x$ composites was synthesized after 96h. From TG analysis, the dehydriding reaction of $Mg_2NiH_x$ started at around $200^{\circ}C$. The result of P-C-T at $300^{\circ}C$ revealed the hydrogen storage capacity of $Mg_2NiH_c$ reached 3.68 wt% and the effective hydrogen storage was 2.38 wt%. The enthalpy difference of absorption-desorption cycling for the hydride formation and the hysteresis were reduced and the plateau flatness and the sloping were improved according to M.A time.