• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.2
• /
• pp.147-153
• /
• 2014

The purpose of this paper is to examine the roll damping characteristics by bilge keels on the fishing vessel. Unlike other degree of freedom motions, roll motion is highly nonlinear. However the quantitative evaluation of roll damping combined with waves is very important for the fishing vessel. To reduce roll motion, roll motion stabilizers such as a bilge keel is used due to easy made and cheap cost rather than anti-rolling tank and fin-stabilizer. Authors paid attention to the shape of bilge keel and waves to grasp the roll damping for the fishing vessel and studied about the difference of tendencies of roll angle following the shapes of bilge keel. The model ship was the offshore large purse seiner and four types of bilge keel were used. The data from the experiments were provided and analyzed to investigate the rolling characteristics of the model ship being affected by the wave height, wave period and bilge keel shape. The results of the study showed that three types of the bilge keel have little effective, but only one has an effect on the roll damping. So bilge keel shape and its attachment method need to be a future study for the practical use in fishing vessel.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.30-40
• /
• 2005

Purpose. The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the incisal reduction (2.0mm, 2.5mm, 3.0mm) and axial inclination ($4^{\circ}$, $8^{\circ}$, $12^{\circ}$) of the upper canine. Material and methods. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and each crown was cemented on each metal die with resin cement. The cemented crowns mounted on the testing jig were inclined 30 degrees and the universal testing machine was used to measure the fracture strength. Results. 1. The fracture strength of the ceramic crown with 3.0mm depth and $12^{\circ}$ inclination was the highest (839N) Crowns of 2.0mm depth and $12^{\circ}$ inclination had the lowest strength (559N). 2. There was no significant difference in the fracture strength by axial inclination in the same incisal reduction group. 3. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the margin irrespective of incisal reduction.

• Journal of the Korean Ceramic Society
• /
• v.42 no.11 s.282
• /
• pp.749-752
• /
• 2005

When an electric field higher than a characteristic coercive field is applied to a ferroelectric such as $LiNbO_3$, the orientation of the spontaneous polarization is reversed, which causes the reversal of the sign of odd-rank tensor properties such as electro-optic and nonlinear optic coefficients. A fabrication process of insulator and periodic external field assisted poling of a z-cut $LiNbO_3$ have been optimized for a periodic $180^{\circ}$ phase inversion along z-axis. The poling jig and the poling control system, fully controlled by a computer, for high quality and reproducible PPLN fabrication have been devised. Periodically polarization reversed PPLN was adjusted based on the fabricated thickness of insulator. The poling structure of PPLN was observed under a microscope after etching PPLN samples by an etching solution ($HF:HNO_3$ = 1 : 2) for about 15 min.

• Journal of Adhesion and Interface
• /
• v.16 no.2
• /
• pp.76-82
• /
• 2015

W/O emulsions were prepared from the aqueous solution containing NIPAAm, MBA, and APS in the continuous phase of toluene and mineral oil mixture with HMP and Span80 by using SPG membrane emulsification, and followed by the formation of PNIPAAm hydrogel microspheres through UV photopolymerization. As the ratio of mineral oil to toluene increased in the continuous phase, both particle size of the hydrogel increased and density of PNIPAAm polymer in the hydrogel particle increased, and which significantly affected swelling/deswelling ratio ($V/V_o$) with temperature change around VPTT. When the polymerization temperature was below LCST ($20^{\circ}C$), PNIPAAm hydrogel showed filled particle morphology; however, it was turned out to hollow particle morphology with thick shell layer with $40^{\circ}C$. Both density of PNIPAAm and gel content of the hydrogel increased with the increase in MBA concentration.

• Journal of Digital Convergence
• /
• v.9 no.1
• /
• pp.89-106
• /
• 2011

With the development of the Internet, the media market is experiencing rapid change. The traditional form of offline newspaper markets, which has created the mainstream news delivery market, have been losing large amounts of power due to the emergence of online media. On the other hand, online media armed with its ability to post breaking news almost as it occurs has increased its influence and popularity at a rapid speed. However, since the exposure time and readership of online newspapers are less than their offline counterparts online media has a high dependence on sensational titles and somewhat exaggerating headlines rather than the objective and recapitulative headlines which are preferred. This paper will examine the function and significance of headlines, and conduct a comparative analysis on contents and forms of the headlines in offline newspaper and online newspaper in order to identify the characteristics of each newspaper. Through comparisons, it examines the types of headlines and the transference of headlines. In addition, it examines the differences in recognition of copy editors according to media in determining the headline, and it illuminates which type of headlines is preferred in order to instigate readers to read online newspapers. The analysis results of title-transferring cases in offline newspaper and online newspapers are that offline newspapers try to convey the contents accurately by making use of an information-transferring headline, while attention-attracting headline or subject-hiding headlines tend to be used for attracting the eye of readers. In addition, analysis results of headlines that are put on the top with a click counts in online newspapers are that attention-attracting headlines are the majority, while subject-hiding headlines that are hardly used in offline newspapers, are well-used in online newspapers. In an interview with copy editors, they responded that offline editors focus on the fact-transference in determining the title, while online editors put the weight on immediacy in the delivery of news and the function of guiding readers.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.69-76
• /
• 2005

In this paper partial discharge were simulated by insulation particle which could be easy accumulated charge and concentrated electric field in the model GIS. In this times this paper measured and analyzed the radiated electromagnetic waves by using spectrum analyzer and antenna$(30\~2000(MHz))$ for measurement of$ EMI{\cdot}EMC$ in accordance with occurrence and propagation of partial discharge. This paper suggested the other method of detecting and estimating of partial discharge for insulation diagnosis of GIS being insulation particle by measurement and analysis of radiated electromagnetic waves. From results of this study, it was confirmed that if the suggested method should be used for the diagnosis of insulation in the model GIS being insulation particle, detecting partial discharge and estimating discharge propagation will be possible.

• Composites Research
• /
• v.33 no.3
• /
• pp.169-175
• /
• 2020

The compression and tension test were performed to evaluate the stiffnesses of the conical composite lattice structures and results of test were compared with finite element analysis results. Because of difficulty to perform simple tension and compression test due to conical shape, suitable specimens and jig for test were made. Subelements extracted from the structure were prepared for compression test. Compression test of subelement was performed and compressive strains in fiber direction were measured. Compressive stiffness of the helical rib was verified by finite element analysis results. For stiffness of hoop rib, hoop ring specimens were extracted from the structure. Tension test of hoop ring specimen was performed to apply bending deformation to hoop rib. Stiffness of hoop rib was verified by finite element model considering various fiber volume fraction in thickness direction.

• Imaging Science in Dentistry
• /
• v.40 no.4
• /
• pp.171-178
• /
• 2010

Purpose : The purpose of this study is to develop a surgical stent for dental implant procedure that can be easily applied and affordable by using cone beam computerized tomography (CBCT). Materials and Methods : Aluminum, Teflon-PFA (perfluoroalkoxy), and acetal (polyoxymethylene plastic) were selected as materials for the surgical stent. Among these three materials, the appropriate material was chosen using the CBCT images. The surgical stent, which could be easily placed into an oral cavity, was designed with chosen material. CBCT images of the new surgical stent on mandible were obtained using Alphard-3030 dental CT system (Asahi Roentgen Co., Ltd., Kyoto, Japan). The point of insertion was prescribed on the surgical stent with the multiplanar reconstruction software of OnDemand3D (CyberMed Inc., Seoul, Korea). Guide holes were made at the point of insertion on the surgical stent using newly designed guide jig. CBCT scans was taken for the second time to verify the accuracy of the newly designed surgical stent. Results : Teflon-PFA showed radiologically excellent image characteristics for the surgical stent. High accuracy and reproducibility of implantation were confirmed with the surgical stent. Conclusion : The newly designed surgical stent can lead to the accurate implantation and achieve the clinically predictable result.

• Archives of Craniofacial Surgery
• /
• v.21 no.3
• /
• pp.166-170
• /
• 2020

Background: The standard treatment of nasal bone fractures in pediatric patients is closed reduction. Conservative treatment is sometimes performed, but poses a risk of nasal deformity. The aim of this study was to evaluate the outcomes of bone remodeling in pediatric nasal fractures. Methods: Information was extracted from the medical records of patients under 12 years of age who received conservative treatment for a nasal bone fracture and underwent follow-up computed tomography (CT) examinations. The initial fracture and its outcomes over time were graded as excellent, good, or fair according to the malalignment, displacement, or irregularity of the fractured segments. The outcomes of remodeling were evaluated through changes in the grade of the fracture between initial and subsequent CT scans. Results: The review identified 16 patients between March 2015 and December 2019. Their mean age was 6.2 years, and the average follow-up period was 4.9 months. Three of the five patients with a plane I frontal impact showed improved outcomes of remodeling from good to excellent, and the remaining two patients, improved from fair to good. Eight of the 11 patients with plane I lateral impacts showed improved outcomes, from good to excellent, while one patient, improved from fair to good, one patient, improved from fair to excellent, and one patient showed no interval changes. Conclusion: In 15 of these 16 patients with non-severe fractures, the bony contour improved through remodeling, without surgical intervention. Therefore, we suggest that conservative treatment is a feasible option for mild pediatric nasal fractures.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.2
• /
• pp.131-139
• /
• 1999

The objective of this works was to synthesize the$Mg_2Ni$ hydrogen storage materials economically and to eliminate the intial activation process. $Mg_2NiH_x$ was mechanically alloyed under purified hydrogen gas atmosphere using pure Mg and Ni chips. M.A(Mechanical Alloying) was carried out using planetary ball mill for times varying from 12h to 96h under 20bars of hydrogen gas pressure. $Mg_2NiH_x$ started to form after 48h and the homogeneous $Mg_2NiH_x$ composites was synthesized after 96h. From TG analysis, the dehydriding reaction of $Mg_2NiH_x$ started at around $200^{\circ}C$. The result of P-C-T at $300^{\circ}C$ revealed the hydrogen storage capacity of $Mg_2NiH_c$ reached 3.68 wt% and the effective hydrogen storage was 2.38 wt%. The enthalpy difference of absorption-desorption cycling for the hydride formation and the hysteresis were reduced and the plateau flatness and the sloping were improved according to M.A time.