• 한국전기전자재료학회논문지
• /
• 제24권2호
• /
• pp.141-146
• /
• 2011

When the current of the superconducting element exceeds its critical current by the fault occurrence, the quench of the high-$T_C$ superconducting fault current limiter (HTSC) comprising the flux-lock type superconducting fault current limiter (SFCL) occurs. Simultaneously, the magnetic flux in the iron core induces the voltage in each coil, which contributes to limit the fault current. In this paper, the fault current limiting characteristics of the flux-lock type SFCL as well as the load voltage sag suppressing characteristics according to the flux-lock type SFCL's winding direction were investigated. To confirm the fault current limiting and the voltage sag suppressing characteristics of the this SFCL, the short-circuit tests for the simulated power system with the flux-lock type SFCL were carried out. The flux-lock type SFCL designed with the additive polarity winding was shown to perform more effective fault current limiting and load voltage sag suppressing operations through the fast quench occurrence right after the fault occurs and the fast recovery operation after the fault removes than the flux-lock type SFCL designed with the subtractive polarity winding.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권8호
• /
• pp.329-333
• /
• 2006

We investigated the quench characteristics of a flux-lock type superconducting fault current limiter (SFCL) depending on the number of the serial connection between the superconducting elements at the subtractive polarity winding of a transformer. The flux-lock type SFCL consists of two coils. The primary coil is wound in parallel to the secondary coil through an iron core, and the secondary coil is connected to the superconducting elements in series. The operation of the flux-lock type SFCL can be divided into the subtractive and the additive polarity windings depending on the winding directions between the primary and secondary coils. In this paper, the analyses of voltage, current, and resistance of superconducting elements in serial connection were performed to increase the power capacity of flux-lock type SFCL. The power burden was reduced through the simultaneous quenching between the superconducting elements. This enabled the flux-lock type SFCL to be easy to increase the capacity of power system.

• 한국전기전자재료학회논문지
• /
• 제18권4호
• /
• pp.363-369
• /
• 2005

we compared the operating characteristics between flux-lock type and resistive type superconducting fault current limiters(SFCLs). Flux-lock type SFCL consists of two coils, which are wound in parallel each other through an iron core, and a high-Tc superconducting(HTSC) element is connected with coil 2 in series. The the flux-lock type SFCL can be divided into the subtractive polarity winding and the additive polarity winding operations according to the winding directions between the coil 1 and coil 2. It was confirmed from experiments that flux-lock type SFCL could improve both the quench characteristics and the transport capacity compared to the resistive type SFCL, which means, the independent operation of HTSC element.

• 한국전기전자재료학회논문지
• /
• 제22권8호
• /
• pp.694-697
• /
• 2009

The separated three-phase flux-coupling type superconducting fault current limiter(SFCL) is composed of a series transformer and superconducting unit of the YBCO coated conductor. The primary and secondary coils in the transformer were wound in series each other through an iron core and the YBCO coated conductor was connected with secondary coil in parallel. In this paper, we investigated the current limiting characteristics through winding number of coil 2 and winding direction in the flux-coupling type SFCL. Through the analysis, it was shown that additive polarity condition and lower winding number of coil 2 have advantaged from the point of view of fault current limiting and burned of YBCO coated conductor.

• 한국전기전자재료학회논문지
• /
• 제22권6호
• /
• pp.522-525
• /
• 2009

We investigated the fault current characteristics of the separates three-phase flux-lock type superconducting fault current limiter(SFCL) according to the variation of inductances. The single-phase flux-lock type SFCL consists of two coils. The primary coil is wound in parallel to the secondary coil on an iron core. And superconductor is series connected on secondary coil. Superconductor is using the YBCO coated conductor. The separated three-phase flux-lock type SFCL consists of single-phase flux-phase type SFCL in each phase. To analyze the current limiting characteristics of a three-phase flux-lock type SFCL, the short circuit experiments were carried out fault such as the triple line-to-ground fault. The experimental result shows that fault current limiting characteristics of additive polarity winding was better than subtractive polarity winding and when the inductances of coil 2 was lower, resistances of YBCO CC was more generated.

• 대한금속재료학회지
• /
• 제50권5호
• /
• pp.383-387
• /
• 2012

The activation of Mg-10 wt%$Fe_2O_3$ was completed after one hydriding-dehydriding cycle. Activated Mg-10 wt%$Fe_2O_3$ absorbed 5.54 wt% H for 60 min at 593 K under 12 bar $H_2$, and desorbed 1.04 wt% H for 60 min at 593 K under 1.0 bar $H_2$. The effect of the reactive grinding on the hydriding and dehydriding rates of Mg was weak. The reactive grinding of Mg with $Fe_2O_3$ is believed to increase the $H_2$-sorption rates by facilitating nucleation (by creating defects on the surface of the Mg particles and by the additive), by making cracks on the surface of Mg particles and reducing the particle size of Mg and thus by shortening the diffusion distances of hydrogen atoms. The added $Fe_2O_3$ and the $Fe_2O_3$ pulverized during mechanical grinding are considered to help the particles of magnesium become finer. Hydriding-dehydriding cycling is also considered to increase the $H_2$-sorption rates of Mg by creating defects and cracks and by reducing the particle size of Mg.

• 자원리싸이클링
• /
• 제26권6호
• /
• pp.84-90
• /
• 2017

저품위 동 함유 슬러지로부터 회수된 동 조금속을 황산구리 전해액에서 전해정련을 수행하여 고순도 동을 회수하고자 하였다. 유기첨가제 종류 및 농도에 따른 전해정련동 표면 형상 및 조도를 분석하였을 때, gelatin계 유기첨가제 5 ppm 및 thiol계 유기첨가제 5~10 ppm 혼합 조건에서 가장 우수한 표면 형상을 얻을 수 있었다. 건식환원공정을 통해 회수한 철(Fe), 니켈(Ni), 코발트(Co) 및 주석(Sn) 등의 불순물이 함유된 각 86.635, 94.969 및 99.917 wt.% 순도의 동 조금속을 사용하여 전해정련하였고, 순도 3N~4N급 전해정련동을 얻을 수 있었다. 동 조금속, 전해액, 전해정련동의 불순 원소 농도 및 동 순도 등의 분석을 통해, 순도 99.99 wt.% 이상 전해정련동을 회수할 수 있는 전해정련 공정시간 및 동 조금속 순도를 도출하였다.

• 전기화학회지
• /
• 제8권2호
• /
• pp.94-98
• /
• 2005

본 연구에서는 CoPtP합금에 첨가원소로 Fe, Mn을 첨가하여 그에 따른 자기적 성질을 제어하고자 하였다. 우선 합금을 합성하기 위해서 용액 중 Fe, Mn의 농도를 변화시키면서 전기도금 방식을 이용하여 CoPtP-X (X=Fe, Mn) 합금을 제조하였다 Fe를 첨가한 합금박막에서는 X선 회절분석 견과 Fe함량이 증가함에 따라 CoPtP합금의 수직방향으로의 우선결정방향이 조밀육방정 [001]방향에서 [100] 방향으로 변화함을 관찰하였고, 이에 따라 결정 자기이방성이 변화하여 전형적인 경자성 특성에서 연자성 특성까지 자기적 특성을 제어할 수 있었다. 용액 중 첨가된 망간의 농도를 변화시켜 제조된 CopPtP-Mn 합금박막에서는 Mn의 농도가 0.0126M일 때 보자력(coercivity)과 각형비(squareness, Mr/Ms)가 각각 4630 Oe, 0.856의 매우 우수한 자기적 성질을 나타내었으며, 이는 Mn의 특정농도에서 CoPtP 합금박막의 우선결정 성장방향인 조밀육방정 c축이 박막면에 대하여 수직하게 놓이는 현상에서 기인된다는 것을 투과전자현미경 분석을 통해 확인하였다.

• 한국지반환경공학회 논문집
• /
• 제13권2호
• /
• pp.59-65
• /
• 2012

본 연구에서는 비소 오염 토양의 비소 처리를 위해 고형화/안정화 공법을 적용하였으며, 4가지 종류의 바인더(시멘트, 영가철(Zero Valent iron, ZVI), monosulfate와 ettringite(시멘트계 합성물질))를 이용하였다. 1 N HCl 용출법을 통해 비교한 결과 바인더 함유량 20%에서, 시멘트(71.41%) > monosulfate(47.45%) > ettringite(46.36%) > 영가철(33.08%)의 비소가 용출되었다. 또한, 시멘트에 첨가제(monosulfate, ettringite, calcium sulfoaluminate, CSA)를 혼합하여 바인더를 제작하여 비소 저감 능력을 평가하였다. 1N HCl 용출법을 통해 비교한 결과 3가지 혼합바인더 모두 혼합비 4:1에서 최대의 비소농도 저감효과를 나타냈으며, CSA(86.27%) > monosulfate(84.78%) > ettringite(84.71%) > 시멘트(71.41%)의 비소를 안정화하여 기존의 시멘트만 단독으로 사용했을 경우보다 더 높은 비소(As(V)) 저감 능력을 가지고 있는 것으로 평가된다.

• 조명전기설비학회논문지
• /
• 제22권1호
• /
• pp.113-117
• /
• 2008

본 논문에서는 결선방향에 따른 자속구속형 전류제한기의 전류제한 및 회 특성에 대해 분석하였다. 자속구속형 초전도 한류기는 초전도 소자와 직렬로 연결된 2차 권선과 병렬로 연결된 1 2차 권선으로 구성되어 있다. 1 2차 권선의 결선방향에 따른 가극 결선과 가극 결선을 갖는 자속구속형 전류제한기를 저항형 전류제한기와 비교하여 분석하였다. 전류제한 및 회복특성은 1 2차 권선의 결선방향에 의존한다. 가극 결선을 갖는 자속구속형 전류제한기의 퀜치시간은 감극 결선이나 저항형 전류제한기보다 더 빠르다는 것을 확인하였다. 초전도 소자에서 소비되는 에너지는 $W= VIt=I^2Rt$으로 표현할 수 있다. 결선 방향에 따라 초전도 소자에서 소비되는 에너지의 차이는 초전도 소자에서 부담하는 전압의 차이 때문이라는 것을 확인할 수 있었다.