• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.227.1-227.1
• /
• 2003

To assess the effect of chitosan complex with metal ion on various pathogenic bacteria, the antibacterial activities were investigated. Arsenic, bismuth, calcium, iodine, iron, mercury, platinum, and silver were used as a metal ion. Staphylococcus aureus. Streptococcus mutans, Helicobacter pylori, Propionibacterium acnes and human saliva were examined. It was demonstrated that metal ions associated chitosan showed aggregation activities on various pathogens.

• 생명과학회지
• /
• 제21권12호
• /
• pp.1710-1715
• /
• 2011

Nano plasma ion (NPi) generator에서 발생한 NPi의 미생물에 대한 살균 효과를 측정하기 위해 미생물 종류, 조사 시간, 챔버 용적, 이온 수량, 거리에 따라 실험 하였다. 먼저 6종의 미생물 Escherichia coli, Pseudomonas aeruginosa, Salmonella typhimurium, Klebsiella pneumoniae, Staphylococcus aureus, Bacillus subtilis를 대상으로 실험한 결과 미생물 종류에 따라 각각 다른 감소율을 나타냈으며, 그람 음성균인 E. coli가 96.57%로 가장 높았고, 그람 양성균 중 포자를 생성하는 B. subtilis가 57.41%로 가장 낮았다. 그리고 NPi 조사시간에 따라 살균력 측정한 결과, 반응 초기에 대부분의 미생물이 사멸하였으며 이후 서서히 증가하였다. 또한 챔버의 크기에 따른 E. coli의 감소율을 비교하였으며 $0.005m^3$부터 $30m^3$까지 5개 챔버에서 NPi를 2시간 조사한 결과 용적이 증가함에 따라 포화이온 농도는 낮아졌고 이와 함께 살균력도 감소하였다. 이에 $1m^3$ 챔버에 NPi generator를 추가로 설치하여 포화 이온농도에 따른 E. coli의 감소율을 알아보았고 포화 이온 농도가 증가함에 따라 감소율도 함께 증가하는 것으로 나타났다. 마지막으로 NPi generator의 거리에 따른 E. coli의 감소율을 확인하였고 이온이 직접적으로 분출되는 부분의 99.19%를 제외한 나머지 위치에서 팬에 의한 이온 순환으로 포화농도가 비슷하게 유지 되었으며 약 97%의 감소율을 나타냈다.

• 분석과학
• /
• 제14권6호
• /
• pp.486-493
• /
• 2001

본 연구는 SIMS를 이용한 bismuth titanate 박막의 깊이방향 분석에 있어서 mesh grid를 사용한 경우와 사용하지 않은 경우, offset voltage를 사용한 경우와 사용하지 않은 경우 등 분석조건에 따른 charging effect 그리고 검출한계의 특성을 검토하고자 하였다. 결과에 따르면 -40 V의 offset voltage를 사용하였을 경우는 charging effect의 감소는 물론 검출한계도 낮출 수 있었으나 mesh grid를 사용하였을 경우에는 charging effect는 다소 줄일 수 있었으나 반면 검출 한계는 오히려 높아졌다. O- 일차이온을 적용한 경우는 -40 V의 offset voltage를 사용하였을 때와 동일한 효과를 얻을 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.39-42
• /
• 2002

Cloride attack of concrete is one of the important causes of corrosion of reinforcing steel in concrete with carbonation and frost damage. In this paper, the effect of fly-ash on the cloride attack were investigated by varying water binder ratio and fly-ash contents according to the chloride ion penetrationa test. (ASTM C 1202-94) The principal conclusions from this research were as follows: 1) The compressive strength of concrete at large ages, depends more on $C_2$S contents of base cement than fly-ash contents. 2) On the other hand, the chloride ion penetration of concrete at large ages, principally depends on fly-ash contents and the influence of type of base cement is insignificant.

• 한국세라믹학회지
• /
• 제25권4호
• /
• pp.349-356
• /
• 1988

The PTCR characteristics of (Ba0.8Pb0.2)TiO3 ceramics prepared by the molten salt sysnthesis (MSS) method have been investigated as a function of the amount of Nb2O5 dopant and KCl flux. When the weight ratio of KCl to raw material is 0.8, the resistivity at room temperature decreases with increasing amount of Nb dopant up to 0.6 atom%. It can be explained by compensation for electrons due to Nb+5 ion and holes due to K+ ion. The resistivity of (Ba0.8Pb0.2)(Ti0.994Nb0.006)O3 ceramics at room temperature decreases with increasing the ratio of KCl to raw material up to 0.6, and then increases. These results can be explained by the effect of K+ ion.

• 환경위생공학
• /
• 제17권2호
• /
• pp.1-10
• /
• 2002

Ammonia is used in the manufacture of fertilizers, refrigerants, stabilizers and many household cleaning agents. The wide applications result in ammonia contamination in water. Ammonia can be removed from water by physical, biological, and chemical methods. Especially ozonation is effective in the treatment of water with low concentration of ammonia. Therefore, this study is undertaken to provide kinetic data for the ozonation of ammonia with bromide. The results were as follows; Ammonia oxidized by ozone with bromide catalysis. The denitrification rate of the ammonia increased proportionally to the concentration of bromide, and the overall reaction order was zero. It was also found that the effect of bromide ion concentration on the denitrification can be expressed by Monod type equation and there was no more effect above a proper bromide ion concentration. The reacted ammonia was converted completely to nitrate ion without bromide, but the denitrification of ammonia by ozone was conducted in the presence of bromide.

• 소성∙가공
• /
• 제15권5호
• /
• pp.366-372
• /
• 2006

The effect of coating time in arc ion plating on surface properties of the TiN-coated high speed steel(SKH51) is presented in this paper. Surface roughness, micro-hardness, coated thickness, atomic distribution of TiN and adhesion strength are measured for various coating times. It has been shown that the coating time has a deep influence on the micro-hardness, the coated thickness, the atomic distribution of Ti and the adhesion strength of the SKH51 steels but that it has little influence on the surface roughness.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.106-110
• /
• 1995

Chloride ion is considered one of the most common culprits in the corrosion of steel in concrete. It breaks down the passive film and allows the steel to corrode actively at a high rate. The main objective of this study is to determine the critical chloride ion concentrations in the pore solutions and chloride binding effect of cement pastes made with and without fly ash. Cement pastes with water-ratio of 0.5 allowed to hydrate in sealed containers for 28 days and to express poresolution. T도 expressed pore fluids were analyzed for chloride and hydroxyl ion concentrations. It was found that the replaced cement with fly ash have little effect on Chloride binding capacity ratio.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.97-98
• /
• 2006

For high performance transistor in the 0.14um generation, high speed sram is using a weak region of SCE(Short Channel Effect). It causes serious SCE problem (Vth Roll-Off and Punch-Through etc). This paper shows improvement of Vth roll-off and Ion/Ioff characteristics through high concentration Pocket implant, LDD(Light Dopped Dram) and low energy Implant to reduce S/D Extension resistance. We achieve stabilized Vth and Improved transistor Ion/Ioff performance of 10%.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.308-313
• /
• 2006

The effect of coating time on surface properties of the TiN-coated high speed steel(SKH51) by arc ion plating is and presented in this paper. Surface roughness, micro-hardness, coated thickness, atomic distribution of TiN and adhesion strength are measured for various coating times. It has been shown that the coating time has a deep influence more than 60 minites on the micro-hardness, coated thickness, atomic distribution of Ti and adhesion strength of the SKH51 steels, but that the coating time has little influence on the surface roughness.