• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.842-848
• /
• 2008

In this study, we propose a novel micro-ion engine system. Single plasma source is used for both ion beam source and neutralizing electron source. By changing the electrical connection, either operation can be switched. This micro-ion engine system gives translation motion and attitude control to microspacecraft. The major objective of this study is verification of our concept. Small plasma source of 20 mm diameter was developed. Plasma was sustained by microwave power. Using this plasma source, ion beam extraction and electron emission was successively demonstrated.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1178-1184
• /
• 2008

In this study, techniques of ion implantation were used in order to improve the characteristics of metal materials such as the oxidation and wear resistant. In particular it is necessary to develope their oxidation and wear resistant that could be used in severe environmental conditions. There are mainly two elementary technologies including ion implantation and/or thin film coating. Ion implantation method was performed for surface modification. As a result, it was found that some ion implantations methods such as Nb, high-temperature Nb ion implantation and Nb+C combined implantation are somewhat effective for improving the oxidation resistance of TiAl alloy. Furthermore, the fluorine PBII treatment is more effective for improving the oxidation resistance of the TiAl alloy with three-dimensional shapes. The implantation of boron ion into thin film of TiN was also effective for improving the properties of materials like high temperature wear resistance. TiCrN film was applied to the actual seal ring for steam turbines, and it was observed that its sliding property showed a successfully good performance.

• Tribology and Lubricants
• /
• 제20권3호
• /
• pp.145-151
• /
• 2004

A modified surface layer by ion implantation is very thin (under 1 $\mu\textrm{m}$) but has superior mechanical characteristics. therefore ion implantation has been used successfully as a surface treatment technology to improve the wear, fatigue, and corrosion resistances of materials. MEVVA which is a kind of ion beam apparatus has merits of low cost and is usable to various metals, but occurs a droplet ranging from micron to tens of micron on the implanted surface at ion implantations. wear is a dynamic phenomenon on interacting surfaces with rotative motion. Since wear changes in condition of the surface, we should control to surface. In order to improve a wear resistance of Ti ion implanted 1C-3Cr steel(material for roller in the cold working process), it is essential to investigate the effect of the droplets on the wear characteristics. In this study, we investigate the effect of the droplets on the wear characteristics of 1C-3Cr steel using SEM Tribosystem as in-situ system. Results show that the droplet occurred at ion implantation becomes the cause of severe wear. Therefore, the ion-implanted surface should be removed the droplet to improve wear resistance.

• Mass Spectrometry Letters
• /
• 제7권4호
• /
• pp.111-115
• /
• 2016

Glycerol was identified and isolated from endogenous interferences during analysis of human urine using high-resolution mass spectrometry (HRMS) for doping control. Urinary sample preparation was simple; the samples were diluted with an organic solvent and then analyzed using a liquid chromatography-mass spectrometry ("dilute and shoot" method). Although the interfering ion peaks were observed at the similar retention time of glycerol, the inference could be identified by isolation with HRMS and further investigation. Thus, creatinine was identified as the endogenous interference for glycerol analysis and it also caused ion suppression resulting in the decrease of glycerol signal. This study reports the first identification and efficient isolation of endogenous interferences in human urine for "dilute and shoot" method. The information about ion suppression could be novel to prevent overestimation or a false result for antidoping analysis.

• 한국지능시스템학회논문지
• /
• 제23권3호
• /
• pp.214-219
• /
• 2013

본 논문에서는 모델의 불확실성을 갖는 RC 배터리 모델의 State-of- Charge(SOC)를 추정하기 위한 강인한 고이득 관측기를 설계한다. 일반적으로 SOC를 추정하기 위해 사용하는 RC 배터리 모델은 실제 배터리 셀과 정확하게 일치하지 않고 거기에 따른 모델의 불확실성이 존재하게 된다. 이렇게 불확실성이 존재할 때 그 영향을 최소화하고 보다 정확한 SOC를 추정할 수 있는 강인한 관측기를 설계하는 것이 중요하다. 본 논문에서는 실제 배터리 셀과 RC 배터리 모델 사이에 모델 불확실성이 존재하더라도 정확한 SOC추정을 위하여 강인한 고이득 관측기를 설계한다. 하지만 이러한 강인한 고이득 관측기는 높은 이득으로 발생하는 튐 현상(peaking phenomenon)과 출력 측정오차에 민감하게 반응하여 발생하는 진동(perturbation)이 존재하는 단점이 있다. 그래서 이를 보완하기 위해 슬라이딩 모드 기법을 사용하여 강인한 고이득 관측기를 설계한다. 마지막으로 성능 검증을 위하여 선형 관측기, 고이득 관측기를 이용한 SOC 추정결과를 비교한다.

• 분석과학
• /
• 제8권2호
• /
• pp.139-159
• /
• 1995

몇 가지 종류의 corticosteroid에 대하여 액체 크로마토그래피-질량분석법으로 양이온 질량 스펙트럼을 얻었다. 화학구조에 따라 수소 첨가된 분자이온 [$MH^+$], 암모늄 첨가이온 [${MNH_4}^+$], 또는 ($MH^+-60$) 이온이 base peak였고 [$MH^+-18$] 또는 [${MNH_4}^+-18$] 이온 등이 특성적으로 나타났다. Methylprednisolone acetate를 male Sprague-Dawley rat에 경구투여한 다음 24시간 동안 배설된 뇨로부터 유리상태 또는 접합상태의 대사물질들을 가수분해, 추출 및 농축하고, thermospray LC/MS를 사용하여 양이온과 음이온 질량토막이온을 분석하였다. Methylprednisolone acetate의 C-21 위치에서의 탈아세틸화(deacetylation), C-20 위치에서 C=0의 -CHOH로의 환원, C-11 위치에서 CHOH의 C=0로의 산화 또는 C-17과 C-20 사이의 bond cleavage등에 의해 생성되는 것으로 추정되는 10여종의 대사물질을 검출하였다. 그 중에 20-hydroxymethylprednisolone(20-HMP), methylprednisolone(MP), methylprednisone(11-KMP)등은 표준물질과 비교 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.561-565
• /
• 2008

Generally, reaction wheels or thrusters are used for attitude control of a satellite. There is a potential method for the attitude control utilizing the plasma flow on the Low Earth Orbit. In the present study, experiments which simulate attitude control of a Low Earth Orbit Satellite using the ionosphere were conducted. In this experiment, a plasma flow was generated by a steady-state Hall type accelerator. However it is known that the Hall type accelerator, which is used as plasma source, produces a torque around its axis called "swirl torque". This torque would affect the attitude control in the above-mentioned experiments. First of all, we conducted the measurement of the swirl torque. Secondly, experiments using a satellite model with negative electrodes were conducted. The negative electrodes generated torque around the axis, and controlled the attitude of the satellite model by changing the applied voltage.

• 한국진공학회지
• /
• 제6권4호
• /
• pp.326-336
• /
• 1997

트랜지스터의 소오스/드레인 접합 특성에 가장 큰 영향을 미치는 인자는 이온 주입 시 발생한 실리콘 내에 발생한 결합이라는 사실에 착안하여, 기존 소오스/드레인 접합 형성 공정과 다른 새로운 방식을 도입하여 이온 주입에 의해 생긴 결함의 제어를 통해 고품질 초 저접합 $p^+$-n접합을 형성하였다. 기존의 $p^+$소오스/드레인 접합 형성 공정은 $^{49}BF_2^+$ 이온 주입 후 층간 절연막들인 TEOS(Tetra-Ethyl-Ortho-Silicate)막과 BPSG(Boro-Phospho-Silicate-Glass)막을 증착 후 BPSG막 평탄화를 위한 furnace annealing 공정으로 진행된다. 본 연구에서는 이러한 기존 공정과는 달리 층간 절연막 증착 전 저온 RTA첨가 방법, $^{49}BF_2^+$와 $^{11}B^+$ 을 혼합하여 이온 주입하는 방법, 그리고 이온 주입 후 잔류 산화막을 제거하고 MTO(Medium temperature CVD oxide)를 증착하는 방법을 제시하 였으며, 각각의 방법은 모두 이온 주입에 의한 실리콘 내 결합 농도를 줄여 기존의 방법보 다 더 우수한 양질의 초 저접합을 형성할 수 있었다.

• 산업기술연구
• /
• 제40권1호
• /
• pp.13-18
• /
• 2020

Lithium-ion batteries have a small volume, light weight and high energy density, maximizing the utilization of mobile devices. It is widely used for various purposes such as electric bicycles and scooters (e-Mobility), mass energy storage (ESS), and electric and hybrid vehicles. To date, lithium-ion batteries have grown to focus on increasing energy density and reducing production costs in line with the required capacity. However, the research and development level of lithium-ion batteries seems to have reached the limit in terms of energy density. In addition, the charging time is an important factor for using lithium-ion batteries. Therefore, it was urgent to develop a high-speed charger to shorten the charging time. In this thesis, a discharger was fabricated to evaluate the capacity and characteristics of Li-ion battery pack which can be used for e-mobility. To achieve this, a smart discharger is designed with a combination of active load, current sensor, and temperature sensor. To carry out this thesis, an active load switching using sensor control circuit, signal processing circuit, and FET was designed and manufactured as hardware with the characteristics of active discharger. And as software for controlling the hardware of the active discharger, a Raspberry Pi control device and a touch screen program were designed. The developed discharger is designed to change the 600W capacity battery in the form of active load.

• 분석과학
• /
• 제9권1호
• /
• pp.1-12
• /
• 1996

열에 불안정하면서 -OH기를 함유하는 미지의 화합물은 LC/TSP/MS에서 [${MNH_4}^+$] 이온, [$MH^+$] 이온, 그리고 [$MH^+-OH$] 이온의 생성이 가능하며, 이들 이온의 m/z값의 차이가 17로서 같기 때문에 이들의 생성 정도에 따라 분자량 추정에 혼란이 일어날 수가 있었다. 따라서 다른 보완 가능한 실험결과가 요구되며 $CF_3COOD+NH_4OH$ 이온화 용액을 사용하여 그 유용성을 검토하였다. 또한 LC/TSP/MS에서 생성되는 토막이온들이 필라멘트의 전자살에 의해 생성되는 것인지 아니면 다른 어떤 생성기전이 존재하는지를 검토하였다.