DOI QR코드

DOI QR Code

Effect of the Droplets on the Wear Characteristics of Steel for the Cold Working Roller

Droplet가 냉연 롤러용 강의 마모 특성에 미치는 영향

  • 문봉호 (여수대학교 공과대학 자동차공학과)
  • Published : 2004.06.01

Abstract

A modified surface layer by ion implantation is very thin (under 1 $\mu\textrm{m}$) but has superior mechanical characteristics. therefore ion implantation has been used successfully as a surface treatment technology to improve the wear, fatigue, and corrosion resistances of materials. MEVVA which is a kind of ion beam apparatus has merits of low cost and is usable to various metals, but occurs a droplet ranging from micron to tens of micron on the implanted surface at ion implantations. wear is a dynamic phenomenon on interacting surfaces with rotative motion. Since wear changes in condition of the surface, we should control to surface. In order to improve a wear resistance of Ti ion implanted 1C-3Cr steel(material for roller in the cold working process), it is essential to investigate the effect of the droplets on the wear characteristics. In this study, we investigate the effect of the droplets on the wear characteristics of 1C-3Cr steel using SEM Tribosystem as in-situ system. Results show that the droplet occurred at ion implantation becomes the cause of severe wear. Therefore, the ion-implanted surface should be removed the droplet to improve wear resistance.

Keywords

References

  1. Wear v.218 Microscofic wear mechanisms of Ti-ion implanted 1C-3Cr sttel Umehara,N.;Moon,B.;Kato,K. https://doi.org/10.1016/S0043-1648(98)00214-2
  2. Wear v.34 Ion implantation and surface modification in tribology Hartley,N.E.W. https://doi.org/10.1016/0043-1648(75)90109-X
  3. Thin Solid Films v.64 Friction and wear of ion-implanted metals-A review Hartley,N.E.W. https://doi.org/10.1016/0040-6090(79)90508-X
  4. Surface and Coatings Technology v.41 Current industrial practices?technical note: High throughput metal-ion implantation system Gehman,B.L.;Magnuson,G.D.;Tooker,J.F.;Treglio,J.R.;Williams,J.P. https://doi.org/10.1016/0257-8972(90)90149-7
  5. Surface and Coatings Technology v.51 Implantation of titanium, Chromium, Yttrium, Molybdenum, Silver, Hafnium, Tantalum, Tungsten and Plantinum ions generated by a metal vapor vacuum ion source into 440C stainless steel Sasaki,J.;Hayashi,K.;Sugiyama,K.;Ichiko,O.;Hashiguchi,Y. https://doi.org/10.1016/0257-8972(92)90233-Z
  6. 한국정밀공학회지 v.14 no.9 이온 주입한 강의 미시적 마모 특성의 평가 문봉호;최병영
  7. Pysica v.104C Cathode spots and vacuum arcs Daalder,J.E.
  8. J. Appl. Phys. v.52 no.1 The interaction between plasma and macroparticles in a multi-cathode-spot vacuum arc Reymond,L.B.;Goldsmith,S. https://doi.org/10.1063/1.328467
  9. Introduction To Contact Mechanics Fundamentals of Friction: Macroscopic and Microscopic Processes Johnson,K.L.