• Earthquakes and Structures
• /
• 제4권2호
• /
• pp.133-155
• /
• 2013

The earthquake responses are studied for the tall flexible structures such as TV towers when the vertical eccentricities between the discrete nodes and the corresponding centroids of investigated lumps are considered. In practical analyses, the tall flexible structures can be made into a spatial-discrete system of some certain length of beam elements with different lengths and cross-sectional areas. These elements are used to construct the investigated lumps in this paper. The different cross-sectional areas and the different lengths of two adjacent elements lead to the appearance of vertical eccentricity between the discrete node and the centroid of investigated lump within the same investigated lump. Firstly, the governing equations are established for a typical investigated lump. Secondly, the calculating formulae of the forces and moments acting on the investigated lump are derived and provided. Finally the new dynamic equilibrium equations with modified mass matrix and assemblage of stiffness matrix have been derived for the stick MDOF model based on beam theory when the existing vertical eccentricities are considered. Numerical results demonstrate that these vertical eccentricities should be considered in order to obtain the accurate earthquake responses for the tall flexible structures.

• 보존과학회지
• /
• 제36권6호
• /
• pp.456-474
• /
• 2020

본 연구는 문화재 보수에 사용되는 소괴 소석회, 분말 소석회, 시판 소석회를 대상으로 배합비에 따른 석회 모르타르의 유동성, 응결시간 및 수축율을 비교하였다. 유동성 시험 결과, 문화재 조적용 석회 모르타르의 최적 배합수 비율은 소괴 소석회 8~10%, 분말 소석회 10~18%, 시판 소석회 17~40%의 범위로 나타났다. 응결시간과 수축율 분석 결과, 문화재수리표준품셈에 기술된 전돌벽쌓기(습식) 대비 종결시간비는 시판 소석회(0.4) < 분말 소석회(5.6) < 소괴 소석회(5.7)의 순으로, 수축율비는 소괴 소석회(1.1) < 분말 소석회(1.2) < 시판 소석회(3.0)의 순으로 나타났다. 물리·화학적 특성 분석 결과, 소석회의 입자크기가 커질수록 최적 배합수 함량은 낮아졌고 응결시간은 지연되며 수축율은 감소하였다. 이와 같은 결과는 향후 건축문화재의 수리·복원 현장에 사용되는 석회 모르타르의 초기거동과 수축특성을 예측하는데 기여할 것으로 판단된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.113-117
• /
• 2004

We need the contingency cost in order to deal with the uncertainty to be accompanied inevitably at the construction and an every kind risk not to forecast in advance. And also the contingency colt needed for the change order and we need it for reduction of the delay and reduce the trouble between owner and constructor. This study, through checking and analyzing the risk factor, in the step of domestic construction, suggests optimal management reserve to specific business about the contract type and the scale. The main results of this research are summarized as follow. First, I investigated the recognition about the contingency cost, grasped the risk to be happened at the construction step and found out the frequency occurrence, through making up question to engineer are carrying out their job in the domestic construction. Second, I computed optimal contingency cost rate by the statistics investigation, and proposed an improvement plan and problem when compute a contingency cost.

• 한국식생활문화학회지
• /
• 제4권2호
• /
• pp.155-159
• /
• 1989

고려시대(高麗時代)에 육대(六大) 차류(茶類)의 전래(傳來) 여부(與否)와 국내(國內)에서의 제차(製茶) 여부(與否)를 고찰(考察)한 결과(結果) 다음과 같은 사실(史實)이 확인(確認)되었다. 1. 연고차(硏膏茶)가 전래(傳來)되어, 국내(國內)에서도 생산(生産)되었다. 2. 향차(香茶)는 백차(白茶)로 만들어졌을 것으로 추정(推定)된다. 3. 엄차와 대차(大茶)는 청차(靑茶)였던 것으로 추정(推定)된다. 4. 고려말기(高麗末期)에는 녹차(綠茶)인 엽차(葉茶)도 음용(飮用)되었다.

• 한국세라믹학회지
• /
• 제33권1호
• /
• pp.92-100
• /
• 1996

Amorphous alumina(AA) the precursor of ${\gamma}$-alumina for catalyst support was made in the newly designed ball filled heating column. Some properties of AA as precursor were investigated. In observation of microstruc-ture and pore structure of AA and its derivatives scanning electronic microscope(SEM) and transmission electronic microscope(TEM) were used. It was found that the width of one particle in AA was 45~60$\AA$ and the average distance among the particles ranged 9~12 $\AA$ which suggested a micropore structure. When AA was reacted with water the shape of the surface was found to be altered and acicular bioehmite was formed inside AA which contributed inproved formability. Pore distribution was evaluated for the three samples of AA ground and granulated lump and La2O3 coated alumina. Acid sites were quantitatively determined by ammonia TPD method and the effect of impurity of Na on acid sites was discussed. Water adsorption capacity was evaluated in terms of a desiccant.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.414-419
• /
• 2006

The ballast or other objects may be located on the rail road by a lump of ice, repairing operation on the track, or the strong gust due to the high speed running of the train. When a train operated in this condition, it causes serious damages to the wheel, train, and structures near the track, or the secondary ballast flying. To remove these objects safely, a ballast blower is suggested which was attached under the train. Firstly, the numerical analyses are investigated to find out the basic flow characteristics of the ballast blower. Next, the performance of the ballast blower is verified by wind tunnel experiments. Through these studies, it is expected that the ballast blower can be applied practically.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.45-53
• /
• 2016

The interaction between the hull of ship and free surface of water generates important loads during slamming motion. In the present study, the slamming load applied on the sectional surface of two-dimensional arbitrary bodies has been investigated under several falling velocities. This simulation has been done with the commercial CFD software ANSYS FLUENT^®. Through the conventional MARINTEK experiments for the benchmark of the simulation, we verified the impact pressure values between the experiments and simulation results. Two arbitrary ship bow section models, Panamax-like(with small convex bulb and flare) and Post panamax-like(with large convex bulb and flare) are also investigated. Simulation results show that a maximum impact pressure on the Post panama-like shape is higher than the Panamax-like shape. According to both a lump of water generated by arbitrary shape and various dead-rise angles of the shape, the pressure picks were enhanced in the simulation.

• 한국표면공학회지
• /
• 제48권2호
• /
• pp.56-61
• /
• 2015

In this study, the wear performance of manganese phosphate coating on SM45C with addition agent of Tartaric acid and Citric acid were investigated. The Surface morphology of manganese phosphate coating was examined by Scanning Electron Microscope (SEM) and Energy Dispersive X-ray spectroscopy (EDS). It is found that Mn, P, Fe, O and C. The crystal structure and thee composition was analysis and determined by using XRD. The XRD results indicated that manganese phosphate coatings are mainly composed of $(Mn,Fe)_5H_2(PO_4)_44H_2O$ and consists of a lot of close packed lump crystalline. Based on the time dependence of morphology and the weight of manganese phosphate coating, it shows that the phosphating process mainly includes three stages: corrosion of the substrate, creation and growth of phosphate crystal nucleus and thickening of manganese phosphate coating. The wear tests were performed in a ball on disc apparatus as per ASTM G-99 Standard. It was showed that the initial wear was quite high followed by low sludge.

• Journal of Acupuncture Research
• /
• 제22권5호
• /
• pp.49-55
• /
• 2005

Objectives : In order to ensure safe Herbal Acupuncture treatment, the quality of needle tip is much important. Therefore we investigated micromorphological characteristics of Herbal Acupuncture needle tip according to the number of injection. Methods : We have selected the 26 Gage syringes & 29 Gage syringes that using currently in Herbal Acupuncture treatment. And we evaluated the change of shape of Herbal Acupuncture needle tip after several times of injection by Inverted System Microscope(x 200). Results & Conclusion : We found at Herbal Acupuncture needle tips had several defects such as hooked, scuffed, lump and irregular, stubbed or malformed shape in spite of new syringes. And we found at Herbal Acupuncture needle tips had several defects that is harmful to body such as mild pain, possibility of damage of tissue after several times of injection. Therefore it is necessary to pay attention to use Herbal Acupuncture needle tips.

• KSBB Journal
• /
• 제18권2호
• /
• pp.127-132
• /
• 2003

Alcohol류를 배양액 속에 첨가하면 배양 중에 생성되는 BC가 엉기는 현상이 나타났다. 생성된 BC의 엉김은 생산배지로부터의 cellulose의 분리회수를 손쉽게 할 수 있는 장점이 있다. 이 중에서 ethanol을 사용하는 경우에는 BC의 생산성과 미생물의 성장속도가 증가하였다. Ethanol 이외의 alcohol류는 BC의 엉김현상에는 효과가 있었으나 그 독성으로 인하여 미생물의 성장과 BC의 생산성을 감소시켰다. Ethanol과 다른 alcohol 모두 BC의 엉김효과는 있으나 ethanol만 진탕배양에서 $\textrm{Cel}^{-}$균주의 출현 방지에 효과가 있었다.