• 전기학회논문지P
• /
• 제58권2호
• /
• pp.130-135
• /
• 2009

In recent years, researches on rotary inverted pendulum control systems have been significantly focused due their highly nonlinear dynamics and complicated geometric structures. This paper presents a novel control approach for such systems by means of similarity transformation theory. At first, we represent nonlinear system dynamics to the controllability-formed state space model including a time-varying parameter vector. We establish the state-feedback control configuration based on the transformed model and derive an adaptive control law for adjusting desired characteristic equation. Numerical analysis is achieved to evaluate our control method and demonstrate its superiority by comparing it to the traditional control strategy. Furthermore, real-time control experiment is carried out to test its practical reliability.

• 한국지능시스템학회논문지
• /
• 제21권5호
• /
• pp.595-601
• /
• 2011

본 논문에서는 영상 정보를 이용하여 로보커 팔위의 역진자의 밸런싱 제어를 한다. 로봇 팔위에 놓인 역진자의 각도는 카메라로 검출하고 검출된 각도 값은 제어기로 귀환되어 오차를 생성한다. 따라서 전체 제어루프는 폐회로 루프를 형성한다. 제어 성능을 높이기 위해 기존 선형제어기에 신경망 제어기를 더하였다. RBF 네트워크의 학습 알고리즘은 FPGA에 설계된 부동소수점 연산이 가능한 디지털 제어기에 의해 수행된다. 실험을 통하여 전체 시스템 성능을 검증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.715-716
• /
• 2008

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2143-2145
• /
• 2002

This paper proposes the control problem of an inverted pendulum system based on adaptive fuzzy sliding mode. The universal approximating capability, learning ability, adaptation capability and disturbance rejection are collected in one control strategy. The proposed scheme does not require an accurate dynamic model and the joint acceleration measurement, yet it guarantees asymptotic trajectory tracking. Experimental results perform with an inverted pendulum to show the effectiveness of the approach.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.859-861
• /
• 1999

This paper describes the development of a fuzzy gain scheduling scheme of PID controller for inverted pendulum system. Fuzzy rules and reasoning are utilized on-line to determine the controller parameters based on the error signal and its difference. Simulation results demonstrate that better control performance can be achieved in comparison with PID controller using pole placement to control of a Inverted pendulum.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.555-558
• /
• 2004

Due to the asymptotic property, deadbeat control can hardly applied to the continuous time system control. But some delay element method can deal such a problem. Except delay element method, well-known digital deadbeat control can br used with the aid of som smoothing elements. In this paper, and order smoothing element is used for the smoothing of the digital deadbeat controller. And this element is argumented to the plant, and so control problem is to control digitally the argumented system. We simulated this control system using Matlab language and finally apply this algorithm to the rotary inverted pendulum system.

• 한국정밀공학회지
• /
• 제28권10호
• /
• pp.1181-1188
• /
• 2011

A control system for stabilizing a small robot or inverted pendulum using twisted gyro wheel is proposed. Conventional stabilizer using inertial wheel employs action-reaction force/torque to control a pendulum, which can generate relatively small torque and short period of output. In this paper, a novel actuation method using twisted gyro torque in 3-dimentional space was proposed to stabilizing a pendulum by twisting the assembly including a rotating gyro wheel. In addition, two special control functions for this type of twisted gyro wheel were designed. One is the function of self-adjusting the mass center of the robot and the other is the torque reloading configuration for continuous torque generation. The proposed system was verified by experimental result and simulation. The designed twisted gyro wheel control system can be easily packed in a small size module and installed in a humanoid robot or inverted pendulum type mechanism.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1470-1473
• /
• 2003

In this paper the networked control systems (NCS) problem is discussed where plants and controllers are distributed and interconnected by a common network. NCS is designed with LQ regulator and applied to an inverted pendulum accounting for the multiple time delays. We are to deals with a networked control system with a single controller, multiple sensors and multiple actuators. Since these parts are distributed, they are interconnected by communication networks. An NCS with LQ regulator is designed and applied to an inverted pendulum as a benchmark plant to check its performance under time delays induced by the network. Network induced delays are composed of two parts. One is the delay from controller to plant, and another is from plant to controller. They are assumed to be constant in this paper, and the plant and controller are discretized. To apply the LQ regulator the NCS model is transformed to a standard model with delayed states as state variable. And real network induced delay is measuring in TCP/IP network assuming that two delays are constant.

• 한국정보통신학회논문지
• /
• 제15권3호
• /
• pp.536-544
• /
• 2011

본 논문에서는 빠르고 조작이 간편한 이동 수단인 이륜 역진자형 이동로봇을 기존의 방법보다 더욱 안정적인 밸런싱을 하기 위한 제어기를 설계하였다. 먼저 이륜 역진자형 이동로봇의 제어기를 일반적인 PID 제어구조로 선택하고, 적절한 제어이득을 지정된 사용자의 몸무게에 따라 시행착오적으로 구하였다. 임의의 몸무게에 따른 PID 이득값을 구하기 위해 PID 이득 값을 신경회로망으로 튜닝을 한 뒤 PID제어기에 적용하여 보다 안정적인 제어가 가능하도록 제어기를 설계하였다. 설계된 제어기를 시뮬레이션에 적용시켜 기존의 PID 제어기에 비해서 본 논문에서 제안한 신경회로망으로 튜닝한 PID 제어기가 보다 안정적인 제어가 가능함을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2815-2817
• /
• 2005

This paper presents an experiment study on the control of a rotary-type inverted pendulum based on the Takagi-Sugeno (T-S) fuzzy model approach. A sufficient condition for stability of the T-S fuzzy control system is given via linear matrix inequalities (LMIs). State-feedback controllers for sub-systems are designed from the sufficient condition via change of variables which is one of the popular LMI techniques. Experimental results on a rotary-type inverted pendulum control show the feasibility of the T-S fuzzy model-based control method.