• KSBB Journal
• /
• 제17권2호
• /
• pp.207-211
• /
• 2002

습식 상 전환법으로 theophylline이 각인된 poly(acryloni-trile-co-acrylic acid) 막을 제조하였다. theophylline은 고분자가 공중합되는 과정에 각인시키거나(in-situ implanting) 제자리 동시 각인) 공중합된 고분자를 DMSO 용액에 녹이면서 template를 섞어 각인시켰다(post implanting, 후 각인). 막의 template molecule에 대한 흡착 선택도는 응고시키는 물의 온도가 높을수록, 혼합물의 초기 농도가 높을수록 크게 나타났다. 후 각인법으로 제조된 막의 흡착선택도가 제자리 동시각인 제작법으로 제조된 막보다 흡착선택도가 우수하였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.203-210
• /
• 2004

The average temperatures by the land cover class, by the elevation extent, by the slope and by the aspect have been calculated using multitemporal Landsat TM band 6 and DEM. For this, the TM band 6 data from October 21, 1985, June 2, 1992, September 1, 1996, May 7, 2000 and the 28.5m x 28.5m grid elevation data of Seoul have been used. From the varying curve of the average land surface temperature by the elevation extent, the presence of the atmospheric inversion phenomenon and the scope of the inversion layer can be inferred. Especially, the average land surface temperature by the aspect can be effective for deciding a road line. For these reasons, it is expected that temperature estimation using remote sensing data shall be effective for the survey of heat damage, environmental temperature monitoring, and urban and environmental Planning usage.

• ETRI Journal
• /
• 제41권6호
• /
• pp.863-872
• /
• 2019

Elliptic curve cryptography is a relatively lightweight public-key cryptography method for key generation and digital signature verification. Some lightweight curves (eg, Curve25519 and Curve Ed448) have been adopted by upcoming Transport Layer Security 1.3 (TLS 1.3) to replace the standardized NIST curves. However, the efficient implementation of Curve Ed448 on Internet of Things (IoT) devices remains underexplored. This study is focused on the optimization of the Curve Ed448 implementation on low-end IoT processors (ie, 8-bit AVR and 16-bit MSP processors). In particular, the three-level and two-level subtractive Karatsuba algorithms are adopted for multi-precision multiplication on AVR and MSP processors, respectively, and two-level Karatsuba routines are employed for multi-precision squaring. For modular reduction and finite field inversion, fast reduction and Fermat-based inversion operations are used to mitigate side-channel vulnerabilities. The scalar multiplication operation using the Montgomery ladder algorithm requires only 103 and 73 M clock cycles on AVR and MSP processors.

• 한국환경과학회지
• /
• 제14권6호
• /
• pp.577-582
• /
• 2005

Enormous apartment complexes in urban areas, temporary inversion state and heat island effect occur due to the strong sunshine and weak wind speeds which hinders the dispersion of air pollutants that are emitted from neighboring areas of apartment complexes. In this study, analysis were conducted by using the Fluent code based on the CFD(Computation Fluid Dynamics), including building layout, material, building height from the ground surface, the heat, analysis of flow field in the apartment complex. It was estimated that the temporal radiation inversion phenomenon during the daytime, which was caused by the weak wind speed and higher temperatures in the upper level, contributed to the stagnation of the air pollutants in the lower layer of the apartment complex.

• 상하수도학회지
• /
• 제34권2호
• /
• pp.127-137
• /
• 2020

In this study, a MWCNT(multi-wall carbon nanotube) was added to polysulfone(PSf) support layer to improve flux of TFC(thin film composite) RO(reverse osmosis) membrane. Two different kinds of MWCNT were used. Surfaces of some MWCNTs were modified hydrophilically through acid treatment, while those of other MWCNTs were modified through heat treatment to maintain their hydrophobicity. MWCNT/PSf support layer was prepared by adding PSf to the NMP mixed solvent containing 0.1 wt% MWCNTs using a phase inversion method. The surface porosity of the MWCNT/PSf support increased by 42~46% while its surface pore size being maintained. The TFC RO membrane made of MWCNT/PSf support layer showed a 20% flux increase while its salt rejection characteristics is sustained. In addition, the MWCNT/PSf support layer has better mechanical stability than the PSf support layer, there resulting in an increased resistance of flux reduction due to physical pressure.

• Membrane and Water Treatment
• /
• 제5권2호
• /
• pp.109-122
• /
• 2014

Polyvinylidene fluoride (PVDF) hollow fiber membrane is widely used for water treatment. However, the weak mechanical strength of PVDF limits its application. To enhance its tensile strength, a double-layer composite hollow fiber membrane, with PVDF and polyetherimide as the external and inner layers, respectively, was successfully prepared through phase inversion technique. The effects of additive content, air gap distance, N,N-dimethyl-acetamide content in the inner core liquid, and the temperature of external coagulation bath on the membrane structure, permeation flux, rejection, tensile strength, and porosity were determined. Experimental results showed that the optimum preparation conditions for the double-layer composite hollow fiber membrane were as follows: PEG-400 and PEG-600, 5 wt%; air gap distance, 10 cm; inner core liquid and the external coagulation bath should be water; and temperature of the external coagulation bath, 40 C. A single layer PVDF hollow fiber membrane (without PEI layer) was also prepared under optimum conditions. The double-layer composite membrane remarkably improved the tensile strength compared with the single-layer PVDF hollow fiber membrane. The permeation flux, rejection, and porosity were also slightly enhanced. High-tensile strength hollow fiber PVDF ultrafiltration membrane can be fabricated using the proposed technique.

• 자원환경지질
• /
• 제14권3호
• /
• pp.193-201
• /
• 1981

수평다층(水平多層) 지질구조(地質構造)모델에 있어서 외견전기비저항곡선(外見電氣比抵抗曲線)의 자동해석(自動解析)에 최소자승법(最小自乘法)을 적용(適用)하여 보았다. 이 방법(方法)은 digital filtering 법(法)과 종합(綜合)된 damped least-squares algorithm으로 구성된 것으로서, 일반적(一般的)으로 사용(使用)되고 있는 curve-matching 법(法)보다 시간(時間)이 빠르고 정도(精度)도 높다는 것을 알게되었다. 이 반전법(反轉法)을 시험(試驗)하기 위해서 한개의 이론(理論)데이터와 3개의 현장탐사(現場探査) 결과(結果)를 선택(選擇)하여 해석(解析)하였다. 3층(層) 지질구조(地質構造)모델로부터 나오는 이론(理論)데이터의 해석(解析)을 통(通)하여 이 방법(方法)의 특징(特徵)을 파악(把握)할 수 있고, 또 종래(從來)의 Curve-matching법(法)에는 없는 명확(明確)한 특징(特徵)이 나타났다. 더우기 반전법(反轉法)의 유효성(有效性)은 현장탐사(現場探査) 결과(結果)의 해석(解析)에 의해서도 알 수 있었다. 그 때의 최적(最適) 지질구조(地質構造)모델은 시굴(試掘)로 확인(確認)된 지하구조(地下構造)와 일치(一致)함을 알 수 있었다.

• 지구물리와물리탐사
• /
• 제9권1호
• /
• pp.93-101
• /
• 2006

이 연구에서는 유전자 알고리듬을 이용하여 수진기 함수와 표면파 위상 속도로부터 심부 퇴적층의 전단파 속도 구조를 결정하는 복합역산 방법을 제시하였다. 합성 탄성파 자료를 이용한 수치모형실험은 제시된 방법이 단지 수진기 함수만을 역산했을 때 발생하는 전단파 속도와 층 두께 사이의 trade-off와, 표면파 위상 속도만을 역산했을 때 심부구조에서의 불확실성을 피할 수 있음을 보여주고 있다 이 방법은 진앙거리 100km의 지진기록으로부터 얻은 수진기 함수들과 일본 Kanto 평원의 상시진동 배열 탐사로부터 얻은 레일리파의 위상속도에 적용되었으며, 추정된 심부구조는 선행된 굴절법 탐사 결과 및 심부 시추공 자료와 잘 일치하였다.

• 대한전자공학회논문지SD
• /
• 제45권4호
• /
• pp.57-63
• /
• 2008

본 논문에서는 Contact Etch Stop Layer (CESL)인 nitride film의 mechanical stress에 의해 인가되는 channel stress가 소자 특성에 미치는 영향에 대해 분석하였다. 잘 알려진 바와 같이 NMOS는 tensile stress와 PMOS에서는 compressive stress가 인가되었을 경우 drain current가 증가하였으며 그 원인을 체계적으로 분석하였다. NMOS의 경우 tensile stress가 인가됨으로써 back scattering ratio ($\tau_{sat}$)의 감소와 thermal injection velocity ($V_{inj}$)의 증가로 인해 mobility가 개선됨을 확인하였다. 또한 $\tau_{sat}$, 의 감소는 온도에 따른 mobility의 감소율이 작고, 그에 따른 mean free path ($\lambda_O$)의 감소율이 작기 때문인 것으로 확인되었다. 한편 PMOS의 compressive stress 경우에는 tensile stress에 비해 온도에 따른 mobility의 감소율이 크기 때문에 channel back scattering 현상은 심해지지만 source에서의 $V_{inj}$가 큰 폭으로 증가함으로써 mobility가 개선됨을 확인 할 수 있었다. 따라서 CES-Layer에 의해 인가된 channel stress에 따른 소자 특성의 변화는 inversion layer에서의 channel back scattering 현상과 source에서의 thermal injection velocity에 매우 의존함을 알 수 있다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.401-408
• /
• 2005

Recently shield TBM tunnellings are being applied to subway construction in Korean cities. Generally these kinds of tunnellings have the problems in the stability of ground such as subsidence because urban subway is constructed in the shallow depth. A sinkhole occurred on the road just above the tunnel during tunneling in Kwangju, so a survey for upper layer of the tunnel was needed. But conventional Ground Probing Radar can't be applicable due to the presence of steel-mesh screen in the shield segment, so no existent geophysical method is applicable in this site. Because the outer surface of each shield segment is electrically insulated, dipole-dipole resistivity method which is popular in engineering site investigation, was tried to this survey for the first time. Specially manufactured flexible ring-type electrodes were installed into the grouting holes at an interval of 2.4 m on the ceiling. The K-Ohm II system which has been developed by KIGAM and tested successfully in many sites, was used in this site. The system consists of 1000Volt-1Ampere constant-current transmitter, optically isolated 24 bit sigma-delta A/D conversion receiver - maximum 12 channel simultaneous measurements, and graphical automatic acquisition software for easy data quality check in real time. Borehole camera logging with circular white LED lighting was also done to investigate the state of the layer. Measured resistivity data lack of some stations due to failing opening lids of holes, shows general high-low trend well. The dipole-dipole resistivity inversion results discriminate (1) one approximately 4 meter diameter cavity (grouted but incompletely hardened, so low resistivity - less than $30{\Omega}m$), (2) weak zone (100-200${\Omega}m$), and (3) hard zone (high resistivity - more than 1000${\Omega}m$) very well for the distance of 320 meters. The 2-D inversion neglects slight absolute 3-D effect, but we can get satisfactory and useful information. Acquired resistivity section and video tapes by borehole camera logging will be reserved and reused if some problem occurs in this site in the future.