• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.307-312
• /
• 1998

In forklift operations, awkward postures due to backward driving may put drivers to the risk of CTD or low back pain. In this research, 6 forklift drivers were surveyed with OWAS for objective posture evaluation and bodymaps for self-report evaluation. The backward driving happened more frequently than forward driving as expected, and, as work hours passed by, the drivers naturally tended to assume the easier work postures in inverse proportion to the frequency of the backward operations. According to the results of OWAS, 60 % of the work postures in the forklift operations belonged to the category II, III, and IV classified serious. Especially, in the backward driving, the postures with the neck twisted over $45^{\circ}$ occupied 82.4 %. In addition, discomfort on the neck, left shoulder, and low back was frequently reported in the self-reports.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.97-97
• /
• 2003

Composition in the (Znl-xNix)2TiO4+ yTiO2 system (x=0-0.5, y=0-0.35) were synthesized via the solid-state reaction route. The incorporation of titanium, in the form of TiO2, in (Znl-xNix)2TiO4 spinel ceramics were investigated by analyzing the crystal structure and measuring the dielectric properties. The result of the crystal structure analysis suggested that TiO2 level of 0.01 y 0.33 could be incorporated into the (Znl-xNix)2TiO4 spinel. The change of incorporated TiO2 level is related with Co-content as a inverse proportion and the variation of lattice parameter and dielectric properties were supported the result.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.240-243
• /
• 2004

A new shear connection for the application of precast decks to PSC girders was proposed and push-off tests were conducted to evaluate the horizontal shear strength of the shear connection. Major parameters of the tests were connector type, shank area, vertical load, surface condition and bedding height. Judging from the test results, shear strength of the suggested shear connection was proportional to the shank area and yield strength of the connectors and was in inverse proportion to the bedding height. Shear connection with shear key at the surface showed better performance. An empirical equation for the evaluation of the shear strength of the shear connection without considering bond strength was proposed and it showed good correlation with the test results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1919-1924
• /
• 2016

In general, Diode rectifier has been applied to DC traction power supply system. Diode has some characteristics which is voltage drop in inverse proportion of load because of non-controlled switch, and cannot flow a current in reverse bias. So, voltage drop occurs frequently, and regenerated power cannot use in substation. The PWM rectifier is able to control output voltage constantly to reduce voltage drop and to use regeneration power without additional inverter. This paper proposes analysis algorithm for DC traction power supply system with PWM rectifier.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.2
• /
• pp.43-45
• /
• 2000

In this study, present a method for extracting the BJT 1/f noise model parameters fabricated by BICMOS process. From the geometric analysis of the Kf, we show that Kf is in inverse proportion to emitter area. And it is extracting that $K=0.8\times10_{-20}, A_f=2, \alpha=1$ values.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.8
• /
• pp.915-922
• /
• 2005

This experimental study is conducted to investigate effects of a splitter plate, which is set on the back side of a square prism in the uniform flow. The Reynolds number is $1.44{\times}10^{4}$ based on the width of the square prism. The measurement of velocity vector and pressure distribution are carried out 4 cases of length in the range of 0.5L to 2.0L with 0.5L interval and 3 cases of Position at 0L, 0.25L, 0.5L, Flow visualization is also executed by smoke-wire method to understand the mechanism of vortex formation The results show the strong vortex shedding patterns and drags are decreased effectively, when the position of splitter plate is 0L. And the drag reduction rate is in inverse proportion to the splitter plate length

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.215-219
• /
• 2007

In this work, the indium zinc oxide (IZO) films had been deposited on the glass substrate coated with the SiO film. Based on a comparative investigation of the IZO monolayer and IZO/SiO multilayer, it is shown that the thickness of SiO film has a great effect on the mechanical properties of the thin films. The AFM images of the IZO thin film included the SiO film were shown smoother surfaces than monolayer. Resistivity was in inverse proportion to Mobility. If it deposited the SiO film on the substrate, the layer of change was generated between two layer(SiO and substrate). The layer of change influenced resistance because of oxygen content was more than the IZO monolayer.

• Korean Journal of Pharmacognosy
• /
• v.27 no.1
• /
• pp.20-25
• /
• 1996

In searching for anticomplementary compounds, three phenylpropanoids were isolated from the roots of Agastache rugosa and identified as rosmarinic acid (RA), rosmarinic acid methyl ester (RAM) and caffeic acid methyl ester (CAM) by NMR analyses. RA and RAM exhibited strong inhibitory activity on both the classical pathway (CP) and the alternative pathway (AP) of the complement system, in vitro, but CAM did far less than RA and RAM. $RAM-M1{\sim}-M5$, the methylated derivatives from the RAM, showed that the inhibitory activity was decreased in inverse proportion to the number of methylated groups and $RAM-M 2{\sim}-M4$, the isomers of two methylated hydroxyl groups, exhibited different inhibition activity.

• Journal of Environmental Impact Assessment
• /
• v.12 no.4
• /
• pp.303-313
• /
• 2003

This study was carried out to survey the high ozone episode of summertime in Busan. The selected day was July 18, 1999 and August 24, 2001 which recorded exceed to 12ppb/hr at 3 station in Busan simultaneously. In case July 18, 1999, thick cloud and variable wind made weak ozone concentration during morning hour. And increase of ozone concentration by revolution of mixed layer for morning hour did not occur in this case study day. Photochemical reaction by strong radiation after 1100LST made sharp increase rate of ozone concentration(50ppb/hr). In case August 24, 2001, the meteorological condition of this day was not general wind with gradient force, very clear day with less cloud amount, high insolation and sunshine. Dongsamdong, Beomcheondong, Daeyeondong, and Sinpyeongdong had double peak which twice maximum concentration in the early afternoon and late afternoon. Ozone concentration of this day was in inverse proportion to Nitrogen oxide strongly. Ozone concentration exceed to 60ppb/hr occurred at 1400LST, continued to 2300LST.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.6
• /
• pp.282-289
• /
• 2001

This paper introduces the scheme that improve the control performance of electromagnetic levitation system with zero power controller. Magnetic levitation is used widely, but the electromagnetic force has nonlinear characteristics because it is proportioned to a square of the magnetic flux density and it is in inverse proportion to a square of the airgap. So, it is complicate and difficult to control the electromagnetic force. Besides, it is more difficult to control if the equivalent gap is unknown in case of zero power control. Therefore, this paper proposed the hybrid electro-magnetic levitation control method in which the variable load is estimated by using a load observer and its system controlled at a new zero power equilibrium airgap position. Also it is confirmed that the proposed control method improve the control performance through simulation and experiment.