• 수산경영론집
• /
• 제40권1호
• /
• pp.133-152
• /
• 2009

The purpose of this paper is to model price formation and analyze demand structures for fishes under the restriction of Korean fisheries regulations. This study suggests the model that the price of fish is formed by its quantity, expenditure, and habit persistence. In economic literature, such a fishery market demand is called the inverse demand with dynamic habit persistence. Based upon a static differential price formation model, the paper has generalized it dynamically incorporating habit persistence effects. The empirical results show that all the species have values less than one and (-) sign of price flexibilities, thus being price inflexible. The estimated habit adjustment coefficients are significant at the level of 1%. Especially, TAC species have the smaller values of them than those of other main fish species. The contribution and results are summarized as follows. First, the fishery market demand has a strong dynamic effects from habit persistence. Second, the fishery market demand structure could be analyzed in a way different from the ordinary demand analysis, which is based upon price flexibility, scale flexibility, and cross adjustment flexibility. Third, the limitation of this paper is that it ignores the increasing stock effects by catching restrictions, thus raising consumers' benefit in the future.

• 한국컴퓨터산업학회논문지
• /
• 제5권9호
• /
• pp.993-1004
• /
• 2004

본 논문에서는 구동토크의 제약을 갖는 4륜 2자유도 구륜이동로봇의 기구학 및 동력학 모델링과 경로추적을 다룬다. 유도된 기구학 모델을 이용하여 구륜이퐁로봇의 가제어성을 조사한다. 순간일치좌표계와 힘/토크의 전파, 뉴튼의 평형법칙을 이용하여 동려학 모델을 유도한다. 역동력학에 의해 산출된 구동토크가 한계 구동토크를 초과할 경우, time-scaling 기법을 이용하여 기준제적을 수정함으로써 구륜이동로봇이 기준경로를 추적하도록 한다. 제어기는 모델링 불확실성과 측정 잡음 등으로 인하여 발생하는 오차를 보상하도록 설계한다. 또한 본 논문에서 제시된 기법의 유효성을 입증하기 위해 모의실험을 수행하고 그 결과를 제시한다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.209-214
• /
• 2004

국내산지사면에서의 토양수분의 시공간적 분포를 파악하기 위하여 TDR(Time Domain Reflectometry)을 이용한 토양수분 장기 모니터링을 실시하였다. 대상사면을 측량하여 DEM(Digital Elevation Model)을 구축하고 흐름분배알고리즘에 적용하여 측정지점을 선정, 역 측량하여 효율적인 측정 체계를 구축하였다. DEM을 통하여 대상산지사면의 지형을 파악, 활용하여 정적 습윤지수(steady-state wetness index), 반동력학적 습윤지수(quasi-dynamic wetness index)를 구하였다. 장기 모니터링을 통한 토양수분 자료를 시공간적으로 분석하고 각각의 습윤 지수의 특징을 분석하고 습윤 지수와 토양수분 실측치와의 유의성과 제한점을 비교 분석하였다.

• 소음진동
• /
• 제7권1호
• /
• pp.61-69
• /
• 1997

Despite of the development in the finite element method, it is difficult to get the finite element model describing the dynamic characteristics of the complex structure exactly. Therefore a number of different methods have been developed in order to update the finite element model of a structure using vibration test data. This paper outlines the basic formulation for the frequency response function based updating method. One important advantage of this method is that the intermediate step of performing an eigensolution extraction is unnecessary. Using simulated experimental data, studies are conducted in the case of 10 DOF discrete system. The solution of noisy and incomplete experimental data is discussed. True measured frequency response function data are used for updating the finite element model of a beam and a plate. Its applicability to the joint identification is also considered.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2014년도 추계학술대회
• /
• pp.219-221
• /
• 2014

The objective of this paper is to simulate the dynamic behavior of a floating structure model, using image processing and close-range photogrammetry, instead of the contact sensors. Previously, the movement of structure was presented through the exterior orientation estimation of a single camera by space resection. The inverse resection yields the 6 orientation parameters of the floating structure, with respect to the camera coordinate system. The single camera solution is of interest in applications characterized by restriction in term of costs, unfavorable observation conditions, or synchronization demands when using multiple cameras. This article discusses the theoretical determinations of camera exterior orientation based on Direct Linear Transformation and photogrammetric resection using least squares adjustment. The proposed method was used to monitor the motion of a floating model. The results of six degrees of freedom (6-DOF) by inverse resection show that the appropriate initial values by DLT can be effectually applied in least squares adjustment, to obtain the precision of exterior orientation parameters. Additionally, a comparison between the close-range photogrammetry and total station results was feasibly verified. Therefore, the proposed method can be considered as an efficient solution to simulating the movement of floating structure.

• 한국정밀공학회지
• /
• 제29권7호
• /
• pp.723-729
• /
• 2012

Spring-like leg models have been employed to explain various dynamic characteristics in human walking. However, this leg stiffness model has limitations to represent complex motion of actual human gait, especially the behaviors of each lower limb joint. The purpose of this research was to determine changes of total leg stiffness and lower limb joint stiffness with gait speed in knee osteoarthritis. Joint stiffness defined as the ratio of the joint torque change to the angular displacement change. Eight subjects with knee osteoarthritis participated to this study. The subject walked on a 12 m long and 1 m wide walkway with three sets of four different randomly ordered gait speeds, ranging from their self-selected speed to maximum speed. Kinetic and kinematic data were measured using three force plates and an optical marker system, respectively. Joint torques of lower limb joints calculated by a multi-segment inverse dynamics model. Total leg and each lower limb joint had constant stiffness during single support phase. The leg and hip joint stiffness increased with gait speed. The correlation between knee joint angles and torques had significant changed by the degree of severity of knee osteoarthritis.

• 제어로봇시스템학회논문지
• /
• 제20권8호
• /
• pp.875-881
• /
• 2014

The redundancy resolution of the seven DOF (Degree of Freedom) upper limb exoskeleton is key to the synchronous motion between a robot and a human user. According to the seven DOF human arm model, positioning and orientating the wrist can be completed by multiple arm configurations that results in the non-unique solution to the inverse kinematics. This paper presents analysis on the kinematic and dynamic aspect of the human arm movement and its effect on the redundancy resolution of the seven DOF human arm model. The redundancy of the arm is expressed mathematically by defining the swivel angle. The final form of swivel angle can be represented as a linear combination of two different swivel angles achieved by optimizing two cost functions based on kinematic and dynamic criteria. The kinematic criterion is to maximize the projection of the longest principal axis of the manipulability ellipsoid of the human arm on the vector connecting the wrist and the virtual target on the head region. The dynamic criterion is to minimize the mechanical work done in the joint space for each of two consecutive points along the task space trajectory. The contribution of each criterion on the redundancy was verified by the post processing of experimental data collected with a motion capture system. Results indicate that the bimodal redundancy resolution approach improved the accuracy of the predicted swivel angle. Statistical testing of the dynamic constraint contribution shows that under moderate speeds and no load, the dynamic component of the human arm is not dominant, and it is enough to resolve the redundancy without dynamic constraint for the realtime application.

• Journal of Mechanical Science and Technology
• /
• 제17권11호
• /
• pp.1608-1615
• /
• 2003

This paper studies on the linearization of a looper system in hot strip mills, that plays an important role in regulating a strip tension or a strip width. Nonlinear dynamic equations of the looper system are analytically linearized by a static feedback linearization algorithm with a compensator. The proposed linear model of the looper is validated by a comparison with a linear model using Taylor's series. It is shown that the linear model by static feedback well describes nonlinearities of the looper system than one using Taylor's series. Furthermore, it is shown from the design of an ILQ controller that the linear model by static feedback is very useful in designing a linear controller of the looper system.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1271-1280
• /
• 2000

A sensor placement technique to identify structural parameter was developed. Experimental results must be acquired to identify unknown dynamic characteristics of a targeting structure for the comparison between analytical model and real structure. If the experimental environment was not equipped itself properly, it can be happened that some valuable information are distorted or ill-condition can be occurred. In this work the index to determine exciting points was derived from the criterion of maximizing parameter sensitivity matrix and that to choose measurement points was from that of preserving the invariant of sensitivity matrix. This idea was applied to a compressor hull structure to verify its performance. The result shows that the selection of measurement and excitation points using suggested criteria improve the ill-conditioning problem of inverse type problems such , as model updating.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.215-226
• /
• 2016

Modeling, control and implementation of a real redundant robot with five Degrees Freedom (DOF) of the SCARA (Selective Compliant Assembly Robot Arm) manipulator type is presented. Through geometric methods and structural and functional considerations, the inverse kinematics for redundant robot can be obtained. By means of a modification of the classical sliding mode control law through a hyperbolic function, we get a new algorithm which enables reducing the chattering effect of the real actuators, which together with the learning and adaptive controllers, is applied to the model and to the real robot. A simulation environment including the actuator dynamics is elaborated. A 5 DOF robot, a communication interface and a signal conditioning circuit are designed and implemented for feedback. Three control laws are executed in: a simulation structure (together with the dynamic model of the SCARA type redundant manipulator and the actuator dynamics) and a real redundant manipulator of the SCARA type carried out using MatLab/Simulink programming tools. The results, obtained through simulation and implementation, were represented by comparative curves and RMS indices of the joint errors, and they showed that the redundant manipulator, both in the simulation and the implementation, followed the test trajectory with less pronounced maximum errors using the adaptive controller than the other controllers, with more homogeneous motions of the manipulator.