• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2010년 춘계학술발표회 논문집
• /
• pp.69-71
• /
• 2010

In this paper, we focus on the accuracy estimation of laser scanning mobile mapping system using Lynx Mobile Mapper. For this, we surveyed checkpoints(181 points) in study areas. A method to estimate the accuracy of laser scanning mobile mapping system based on the measurement range, interval of control points and gps signal environments. As a result, to ensure reliable measurement results, we must be made a plan considering Measure range(60m or under) and operation. The estimation results showed the need for improving accuracy using control points about 150m interval according to environment error source.

• 한국통신학회논문지
• /
• 제39C권6호
• /
• pp.482-489
• /
• 2014

본 논문은 IEEE 802.11 환경에서 새로운 AP를 탐색하기 위한 네트워크 스캐닝의 기존 방식을 802.11k의 Measurement Pilot을 활용하여 개선하는 새로운 알고리즘을 제안한다. 그리고 제안한 알고리즘과 종래의 알고리즘을 시뮬레이션 환경에서 비교하여 분석한다. 일반적인 IEEE 802.11을 사용하는 기기들은 탐색 시간이 짧다는 장점을 갖는 능동 탐색(Active Scan)방식을 활용한다. 하지만 이 방식은 수동 탐색(Passive Scan) 방식에 비해 많은 전력사용을 필요로 한다. 본 논문에서 제안하는 탐색 알고리즘은 IEEE 802.11k에서 활용되는 비컨(Beacon)보다 짧은 주기를 갖는 Measurement Pilot을 활용하여 수동 탐색과 능동 탐색의 장점을 취합하여 전력사용을 줄인다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권1호
• /
• pp.34-40
• /
• 2012

We have developed a highly sensitive inspection technique based on an electron beam inspection for detecting the contact failure of a poly-Si plugged layer. It was difficult to distinguish the contact failure from normal landing plugs with high impedance. Normally, the thermal annealing method has been used to decrease the impedance of poly-Si plugs and this method increases the difference of charged characteristics and voltage contrast. However, the additional process made the loss of time and broke down the device characteristics. Here, the interval scanning method without thermal annealing was effectively applied to enhance the difference of surface voltage between well-contacted poly-Si plugs and incomplete contact plugs. It is extremely useful to detect the contact failures of non-annealed plug contacts with high impedance.

• 대한방사선기술학회지:방사선기술과학
• /
• 제20권1호
• /
• pp.15-20
• /
• 1997

Unlike conventional CT scan, the helical CT scan uses continuous rotating CT equipment with a slip ring to move the patient's coach at a constant speed while continuously scanning. Slice sensitivity profiles in the Z-position(SSPz) using the conventional X-ray CT have a shape similiar to a rectangular wave, which slightly spreads out into plains below the mountain. However, in the helical CT, with an expansion of the base, the rectangular shape collapses and a mouatain-like shape can be seen. We need to investigate the fellowing factors in helical CT scanning;the ability to scan along the axis of the body, effective slice width, slice shape and the precision of coach velocity, Helical scanning with sprial X-ray track is different from the conventional scanning in terms of the principle of image reconstruction performed. We believe that the problems in helical scanning can be solved by understanding new the special parameters such as the bed moving speed and the interval of image reconstruction.

• 비파괴검사학회지
• /
• 제35권6호
• /
• pp.389-397
• /
• 2015

Recently, wave propagation imaging based on laser scanning-generated elastic waves has been intensively used for nondestructive inspection. However, the proficiency of the conventional software based system reduces when the scan area is large since the processing time increases significantly due to unavoidable processor multitasking, where computing resources are shared with multiple processes. Hence, the field programmable gate array (FPGA) was introduced for a wave propagation imaging method in order to obtain extreme processing time reduction. An FPGA board was used for the design, implementing post-processing ultrasonic wave propagation imaging (UWPI). The results were compared with the conventional system and considerable improvement was observed, with at least 78% (scanning of $100{\times}100mm^2$ with 0.5 mm interval) to 87.5% (scanning of $200{\times}200mm^2$ with 0.5 mm interval) less processing time, strengthening the claim for the research. This new concept to implement FPGA technology into the UPI system will act as a break-through technology for full-scale automatic inspection.

• 한국도로학회논문집
• /
• 제10권3호
• /
• pp.231-237
• /
• 2008

선진국의 기본 요건들 중 하나는 잘 정비된 교통인프라라 할 수 있을 것이다. 이러한 교통안전시설에 대해 해외에서는 각종 교통안전시설에 대해 객관적인 상태평가를 기초로 하여 시설을 관리하는 자산관리(Asset Management)측면에서 시설을 관리하고 있는 추세이다. 이 중 도로관련 각종 안전시설은 매우 다양하며, 기능 또한 매우 중요하기 때문에 이들에 대한 설치 규정 및 지침을 제정하고 있다. 그러나 설치기준 및 지침이 있음에도 불구하고, 각 시설이 기준에 부합되게 설치되지 않아 오히려 도로이용자에게 불편함 뿐 아니라, 안전에도 악영향을 끼치고 있다. 본 연구에서는 다양한 도로안전시설 중 도로의 설계(운영)속도 및 기하구조에 따라 설치 간격 및 높이들이 규정화 되어있는 시설에 대해 라인스캔카메라를 이용, 이를 신속하게 측정 가능한 영상분석 모델을 개발하였다. 또한 이를 체계적으로 분석할 수 있는 프로그램을 개발하여 현장에 적용하였으며, 그 결과 매우 정확하게 시설의 크기와 설치간격을 신속하게 측정할 수 있었다.

• Smart Structures and Systems
• /
• 제22권2호
• /
• pp.223-230
• /
• 2018

This study examines a non-contact laser scanning-based ultrasound system, called an angular scan pulse-echo ultrasonic propagation imager (A-PE-UPI), that uses coincided laser beams for ultrasonic sensing and generation. A laser Doppler vibrometer is used for sensing, while a diode pumped solid state (DPSS) Q-switched laser is used for generation of thermoelastic waves. A high-speed raster scanning of up to 10-kHz is achieved using a galvano-motorized mirror scanner that allows for coincided sensing and for the generation beam to perform two-dimensional scanning without causing any harm to the surface under inspection. This process allows for the visualization of longitudinal wave propagation through-the-thickness. A pulse-echo ultrasonic wave propagation imaging algorithm (PE-UWPI) is used for on-the-fly damage visualization of the structure. The presented system is very effective for high-speed, localized, non-contact, and non-destructive inspection of aerospace structures. The system is tested on an aluminum honeycomb sandwich with disbonds and a carbon fiber-reinforced plastic (CFRP) honeycomb sandwich with a layer overlap. Inspection is performed at a 10-kHz scanning speed that takes 16 seconds to scan a $100{\times}100mm^2$ area with a scan interval of 0.25 mm. Finally, a comparison is presented between angular-scanning and a linear-scanning-based pulse-echo UPI system. The results show that the proposed system can successfully visualize defects in the inspected specimens.

• 디지털산업정보학회논문지
• /
• 제10권2호
• /
• pp.13-20
• /
• 2014

In this paper, we implemented the object scanning with nxtOSEK which is an open source platform. nxtOSEK consists of device driver of leJOS NXJ C/Assembly source code, TOPPERS/ATK(Automotive real time Kernel) and TOPPERS/JSP Real-Time Operating System source code that includes ARM7 specific porting part, and glue code make them work together. nxtOSEK can provide ANSI C by using GCC tool chain and C API and apply for real-time multi tasking features. We experimented the 3D scanning with ultra sonic and laser sensor which are made directly by laser module diode and experimented the measurement of scanning the object by knowing x, y, and z coordinates for every points that it scans. In this paper, the laser module is the dimension of $6{\times}10[mm]$ requiring 5volts/5[mW], and used the laser light of wavelength in the 650[nm] range. For detecting the object, we used the beacon detection algorithm and as the laser light swept the objects, the photodiode monitored the ambient light at interval of 10[ms] which is called a real time. We communicated the 3D scanning platform via bluetooth protocol with host platform and the results are displayed via DPlot graphic tool. And therefore we enhanced the functionality of the 3D scanner for identifying the image scanning with laser sensor modules compared to ultra sonic sensor.

• 한국IT서비스학회지
• /
• 제11권sup호
• /
• pp.103-111
• /
• 2012

In epigraph field to study ancient scripts, alternative readability improvement technologies have been developed to replace existing rubbing method which has low resolution and causes surface pollution of heritages from the viewpoints of extraction process and used materials. Recently many methods which are based on analysis of pixel data for extracting outlines of the specific image have been developed with advancement of image processing techniques. But these methods are not applicable and the results are not satisfied in the damaged inscriptions which are weathered by wind and rain for a long time and in the narrowed one. In this paper laser scanning techniques which uses optical triangulation measurement principle are developed to minimize scanning error. The proposed techniques are consisted of 3 parts：(1) the understanding of optical triangulation measurement principle to find scanning guideline (2) determinations of points interval, scanning distance and scanning angle to guarantee scanning data quality (3) identification of valid point data area which will be used in registration process. The proposed character identification method contributed in decoding an ancient inscription on SeukBingGo in Kyungju.

• 한국광학회지
• /
• 제15권1호
• /
• pp.51-55
• /
• 2004

표면 플라즈몬은 금속 표면에 존재하는 자유전자의 밀도파이며, 광자와 결합하여 존재한다. 본 논문에서는 근접장 주사 광학 현미경을 구성하고 이를 이용하여 표면에서 지수함수적으로 감소하는 표면 플라즈몬과 두 표면 플라즈몬에 의한 간섭무늬를 측정하였다. 표면 플라즈몬은 표면의 작은 광학적 분포에도 민감하게 변화하여, 광학 탐침이 금속 표면에 접근함에 따라서 표면 플라즈몬의 공명 조건에 영향을 준다. 이로 인해 광학 탐침이 금속 표면으로부터 약 250nm 떨어진 곳에서 광의 세기가 최대가 됨을 확인하였다.