• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.1-43
• /
• 1971

Experiment I: The objective of this study was to know variation in some selected agronomic characters of sweet sorghum when planted in several growing seasons. The 17 different sweet sorghum varieties having various maturities, and plant, syrup and sugar types were used in this study which had been carried out for the period of two years from 1968 to 1969 at Industrial Crops Division of Crop Experiment Station in Suwon. These varieties were planted at an interval of 20 days from April 5 to August 25 both in 1968 and 1969. The experimental results could be summarized as follows: 1. As planting was made early, the number of days from sowing to germination was getting prolonged while germination took place early when planted at the later date of which air temperature was relatively higher. However, such a tendency was not observed beyond the planting on August 25. In general, a significant negative correlation was found between the number of days from sowing to germination and the average daily temperature but a positive correlation was found between the former and the total accumulated average temperature during the growth period. 2. The period from sowing to heading was generally shortened as planting was getting delayed. The average varietal difference in number of days from sowing to heading was as much as 30.2 days. All the varieties were grouped into early-, medium and late-maturing groups based upon a difference of 10 days in heading. The average number of days from sowing to heading was 78.5$\pm$4.5 days in the early-maturing varieties, 88.5$\pm$4.5 days in the medium varieties and 98.5$\pm$4.5 days in the late-maturing varieties, respectively. The early-maturing varieties had the shortest period to heading when planted from July 15 to August 5, the medium varieties did when planted before July 15 and the late-maturing varieties did when planted before June 5. 3. The relationship between the sowing date (x) and number of days from sowing to heading could be expressed in an equation of y=a+bx. A highly positive correlation was found between the coefficient of the equation(shortening rate in heading time) and the average number of days from sowing to heading. 4. The number of days from sowing to heading was shortened as the daily average temperature during the growth period was getting higher. Early-maturing varieties had the shortest period to heading at a temperature of 24.2$^{\circ}C$, medium varieties at 23.8$^{\circ}C$ and late-maturing varieties at 22.9$^{\circ}C$, respectively. In other words, the number of days from sowing to heading was shortened rapidly in case that the average temperature for 30 days before heading was 22$^{\circ}C$ to $25^{\circ}C$. It prolonged relatively when the temperature was lower than 21$^{\circ}C$. 5. There was a little difference in plant height among varieties. In case of early planting, no noticeable difference in the height was observed. The plant height shortened generally as planting season was delayed. Elongation of plant height was remarkably accelerated as planting was delayed. This tendency was more pronounced in case of early-maturing varieties rather than late-maturing varieties. As a result, the difference in plant height between the maximum and the minimum was greater in late-maturing varieties than in early-maturing varieties. 6. Diameter of the stalk was getting thicker as planted earlier in late-maturing varieties. On the other hand, medium or early-maturing varieties had he thickest diameter when they were planted on April 25. 7. In general, a higher stalk yield was obtained when planted from April 25 to May 15. However, the planting time for the maximum stalk yield varied from one variety to another depending upon maturity of variety. Ear]y-maturing varieties produced the maximum yield when planted about April 25, medium varieties from April 25 to May 15 and late-maturing varieties did when planted from April 5 to May 15 respectively. The yield decreased linearly when they were planted later than the above dates. 8. A varietal difference in Brix % was also observed. The Brix % decreased linearly when the varieties were planted later than May 15. Therefore, a highly negative relationship between planting date(x) and Brix %(y) was detected. 9. The Brix % during 40 to 45 days after leading was the highest at the 1st to the 3rd internodes from the top while it decreased gradually from the 4th internode. It increased again somewhat at the 2nd internode from the ground level. However, it showed a reverse relationship between the Brix % and position of internode before heading. 10. Sugar content in stalk decreased gradually as planting was getting delayed though one variety differed from another. It seemed that sweet sorghum which planted later than June had no value as a sugar crop at all. 11. The Brix % and sugar content in stalk increased from heading and reached the maximum 40 to 45 days after heading. The percentage of purity showed the same tendency as the mentioned characters. Accordingly, a highly positive correlation was observed between. percentage of purity and Brix % or sugar content in stalk. 12. The highest refinable sugar yield was obtained from the planting on April 25 in late-maturing varieties and from that on May 15 in early-maturing varieties. The yield rapidly decreased when planted later than those dates. Such a negative correlation between planting date(x) and refinable sugar yield(y) was highly significant at 1% level. 13. Negative correlations or linear regressions between delayed planting and the number of days from sowing to germination. accumulated temperature during germination period, number of days to heading, accumulated temperature to heading, plant height, stem diameter, stalk weight, Brix %. sugar content, refinable sugar yield or Purity % were obtained. On the other hand, highly positive correlations between the number of days from sowing to heading(x) and Brix %, sugar content, purity %, refinable sugar yield, plant height or stalk yield, between Brix %(x) and purity %, refinable sugar yield or stalk yield, between sugar content(x) and purity% or refinable sugar yield(y), between purity %(x) and refinable sugar yield and between daylength at heading(x) and Brix %. number of days from sowing to heading, sugar content, purity % or refinable sugar yield (y), were found, respectively. Experiment II: The 11 varieties were selected out of the varieties used in Experiment I from ecological and genetic viewpoints. Complete diallel cross were made among them and the heading date, stalk length, stalk yield, Brix %, syrup yield, combining ability and genetic behavior of F$_1$ plants and their parental varieties were investigated. The results could be summarized as follows: 1. In general, number of days to heading showed a partial dominance over earliness or late maturity or had a mid-value, though there were some specific combinations showing a complete dominance or transgressive segregation in maturity. Some combinations showed relatively high general or specific combining abilities in maturity. Therefore, a 50 to 50 segregation ratio in heading date could be estimated in this study and it might be positive to have a selection in early generation since heritability of the character was relatively high. 2. A vigorous hybrid vigor was observed in stalk length. A complete or partial dominant effect of long stalk was obtained. The general combining ability and specific combining ability of stalk length were generally high. Long and short stalks segregated in a ratio of 50:50 and its heritability was relatively low. 3. Except for several specific combinations, high stalk yield seemed to be partial dominant over the low yield. Some varieties demonstrated relatively high general as well as specific combining abilities. It was assumed that several recessive genes were involved in expression of this character. The interaction among regulating recessive genes was also obtained. Accordingly, the heritability of stalk yield seemed to be rather low. 4. The Brix % of hybrid plants located around mid-parental value though some of them showed much higher or lower percentage. It could be explained by the fact that such behavior might be due to partial dominance of Brix %. The varieties with, relatively higher Brix % were high both in general. and specific combining abilities. Therefore, it could be recommended to use the varieties having higher sugar content in order to develop higher-sugar varieties. 5. The syrup yield seemed to be transgressively segregated or completely dominant over low yield. Hybrid vigor of syrup yield was relatively high. No-consistent relationship between general combining ability and specific combining ability was observed. However, some cases demonstrated that the varieties with relatively higher general combining ability had relatively lower specific combining ability. It was assumed that the frequencies of dominant and recessive alleles were almost same.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.250-262
• /
• 2008

In order to assess the feasibility of the dipole-dipole electric method to the investigation of metallic ore deposit, both field data simulation and inversion are carried out for several simplified ore deposit models. Our interest is in a vein-type model, because most of the ore deposits (more than 70%) exist in a vein type in Korea. Based on the fact that the width of the vein-type ore deposits ranges from tens of centimeters to 2m, we change the width and the material property of the vein, and we use 40m-electrode spacing for our test. For the vein-type model with too small width, the low resistivity zone is not detected, even though the resistivity of the vein amounts to 1/300 of that of the surrounding rock. Considering a wide electrode interval and cell size used in the inversion, it is natural that the size of the low resistivity zone is overestimated. We also perform field data simulation and inversion for a vein-type model with surrounding hydrothermal alteration zones, which is a typical structure in an epithermal ore deposits. In the model, the material properties are assumed on the basis of resistivity values directly observed in a mine originated from an epithermal ore deposits. From this simulation, we can also note that the high resistivity value of the vein does not affect the results when the width of the vein is narrow. This indicates that our main target should be surrounding hydrothermal alteration zones rather than veins in field survey. From these results, we can summarize that when the vein is placed at the deep part and the difference of resistivity values between the vein and the surrounding rock is not large enough, we cannot detect low resistivity zone and interpret the subsurface structures incorrectly using the electric method performed at the surface. Although this work is a little simple, it can be used as references for field survey design and field data Interpretation. If we perform field data simulation and inversion for a number of models and provide some references, they will be helpful in real field survey and interpretation.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.276-280
• /
• 2012

This study was conducted to determine the ideal beginning date of plastic house optimum heating for off-season (December) production of asparagus. To achieve this, the 1.6-year-old 'Green tower' asparagus was cultivated in Jeju area ($33^{\circ}$28.110N, $126^{\circ}$31.076E) and the yield and quality among 7 different beginning dates of heating from Oct. 25 to Jan. 20 with 15-days interval were compared. The heating was controlled to maintain the inside temperature was higher than $20^{\circ}C$, But the plastic house was ventilated when the inside temperature rose to $30^{\circ}C$. Days to sprouting took longer as heating dates were delayed. Days to sprouting took 52 days in heating at December 30, and the days were shortened thereafter. As the beginning of heating was delayed, sprouting of asparagus was retarded. Among treatments, days to sprouting was 52 days and longest when the heating began on December 30. When the heating began on October 25, harvest was earliest and started on 7 November. When the heating began on November 15 and 30, harvest started on November 30 and December 18, respectively. Harvesting started on November 7 for October 25 heating, November 30 for Nov. 15 heating, and December 18 for November 30 heating, respectively. When the heating began was done after December. 15, harvesting was possible after early January. The number of spear, spear weight and yield were highly increased in the treatments of heating after January. 10 when the asparagus dormancy was broken. In the case of heating dates were before the asparagus dormancy breaking, the total yield was highest in November 15 heating with 607 kg/10a. The marketable yield of November 15 heating was 386kg/10a, which was twice higher than the 193 kg/10a of October 25 heating. Accordingly, it is recommended to start heating on November 15 for the production of off-season (December) asparagus in Jeju. Therefore, the optimum heating date to start was November 15 for the improvement of quality and yield of off-season (December) asparagus in Jeju area.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.6
• /
• pp.185-196
• /
• 2015

Energy aware server clusters aim to reduce power consumption at maximum while keeping QoS(Quality of Service) compared to energy non-aware server clusters. They adjust the power mode of each server in a fixed or variable time interval to let only the minimum number of servers needed to handle current user requests ON. Previous studies on energy aware server cluster put efforts to reduce power consumption further or to keep QoS, but they do not consider energy efficiency well. In this paper, we propose an energy efficient cluster management based on autonomous learning for energy aware server clusters. Using parameters optimized through autonomous learning, our method adjusts server power mode to achieve maximum performance with respect to power consumption. Our method repeats the following procedure for adjusting the power modes of servers. Firstly, according to the current load and traffic pattern, it classifies current workload pattern type in a predetermined way. Secondly, it searches learning table to check whether learning has been performed for the classified workload pattern type in the past. If yes, it uses the already-stored parameters. Otherwise, it performs learning for the classified workload pattern type to find the best parameters in terms of energy efficiency and stores the optimized parameters. Thirdly, it adjusts server power mode with the parameters. We implemented the proposed method and performed experiments with a cluster of 16 servers using three different kinds of load patterns. Experimental results show that the proposed method is better than the existing methods in terms of energy efficiency: the numbers of good response per unit power consumed in the proposed method are 99.8%, 107.5% and 141.8% of those in the existing static method, 102.0%, 107.0% and 106.8% of those in the existing prediction method for banking load pattern, real load pattern, and virtual load pattern, respectively.

• Journal of dental hygiene science
• /
• v.15 no.5
• /
• pp.659-665
• /
• 2015

A wide variety of methods have been used to control Dental Unit Waterline (DUWL) contamination. Among the methods, flushing is mainly used because it is simple and easy to use. Generally, flushing of DUWL for 20 or 30 sec before using high speed handpieces or scalers is recommended. However, the appropriateness of flushing time was not investigated thoroughly. The purpose of this study was to check the effective time of flushing for decreasing bacterial contamination. Seven dental unit chairs were randomly selected in student clinical simulation laboratory for this experiment. DUWLs were continuously flushed and water samples were collected at an interval of 30 seconds for 15 minutes. From five dental unit chairs, water samples were collected every 10 seconds for 1 minute. Bacterial levels in water samples were examined by the culture method on R2A plates. After 10 second flushing of DUWLs, the number of bacteria significantly reduced and decreased continuously up to 40 seconds. However, even after the water was flushed for 15 minutes, the bacterial contamination level was not reduced below recommended bacteria level, 200 CFU/ml. In addition to flushing, the periodic chemical disinfection is required to control the DUWL water to the recommended level.

• Health Policy and Management
• /
• v.14 no.1
• /
• pp.65-88
• /
• 2004

In general, empowerment is defined as the motivational concept of autonomy and self-efficacy. Recently, the concept of empowerment is applied to improve organizational staff's job satisfaction and organizational commitment in many organizations. Empower-ment in service organizations, i.e., hospitals, has certainly generated more publicity than any other organizations. The objectives of this study are, first, to measure the degree of hospital employees' empowerment using Spreitzer(1995)'s empowerment theory, second, to analyze the causal relationship of organizational and job characteristics, a degree of empowerment, and organizational performance(job satisfaction and organizational commitment), and third, to offer the strategy for the improvement of job satisfaction and organizational commitment. Spreitzer insists that the empowerment is composed of 4 dimensions(meaning, competence, self-determination, and impact). And he argues that various work-related characteristics is a direct cause of empowerment and the indirect cause of job satisfaction and organizational commitment, mediated by the empowerment latent variable. In order to perform this study, data were collected by self-administered questionnaires from hospital employees working in administrative department of 3 university hospitals in Inchon and Kyunggi-Do region. The number of cases is 181(response rate; 86%). The Collected data were analyzed with SPSS Ver. 10.0 and AMOSV Ver. 4.0. First, to test validity of variables, the factor analysis was used. Second, to test reliability, Cronbach's alpha coefficients was calculated. Cronbach's alpha of empowerment variable is 0.8323 showing that there's no problem in regard to the internal consistency. Also the Cronbach's alpha of other variables are 0.8301 of the degree of perceived control, 0.6705 of job characteristics, O.8787 of compensation, 0.9254 of job satisfaction, and 0.8389 of organizational commitment, respectively. Among the questions of job characteristics, two survey questions are deleted due to lowering the reliability. Third, to test multicollinearity and correlation of variables, the correlation analysis was performed. There was no problem of multicollinearity. Finally structural equation modelling (SEM) analysis was conducted to find the causal relationship of organizational and job Characteristics, empowerment, job satisfaction and organizational commitment. The 16 variables are included for the SEM analysis. The major results of this study are as follows: First, in the case of model fitness, the condition of x$^2$ statistic(92.187) is not fully satisfied, but the indices of GFI(0.912), AGFI(0.863), NFI(0.917) and CFI(0.928) are partially satisfied, which needs to upper 0.90. Second, in the result of hypotheses testing, all hypotheses are accepted and have a positive effect in 95% or 99% confidence interval(P<0.05 or P<0.001) except the effect of compensation variable on empowerment(P=0.082). Third, in regard to the direct, indirect, and total effect of variables, the direct effect of perceived control, task characteristics, and compensation on job satisfaction are 0.728, 2.264, 0.328 and on organizational commitment are 0.094, 1.411, 0.418, respectively. Also the indirect effect of perceived control, task characteristics, and compensation on job satisfaction are 0.311, 0.196, 0.028 and on organizational commitment are 0.210, 0.132, 0.019, respectively. Thus, these findings imply that various work-related factors are direct effect of empowerment and indirect effect of result variables, job satisfaction and organizational commitment. Also These results showed that the workplace empowerment is significant mediating factor of employee's job satisfaction and organizational commitment.

• Neonatal Medicine
• /
• v.18 no.2
• /
• pp.240-247
• /
• 2011

Purpose: The rationale for skin surface cultures is that bacterial colonization precedes infection and, as a result, that identification of a potential pathogen is predictive of later systemic infection in preterm infants. We aimed to analyze results of surveillance surface cultures in extremely low birth weight (ELBW) infants and seek for effective ways of performing surveillance surface cultures. Methods: We analyzed the surveillance surface cultures of 113 ELBW infants over a 4-year period. Surveillance cultures were obtained routinely from five sites: axilla, external ear canal, nasopharynx, throat (or tracheal aspirate if intubated) and anus. Each surface culture obtained during the 13 days, prior to the date of the blood culture, was compared with the blood culture obtained when sepsis was suspected. The sensitivity, specificity and positive predictive value (PPV) of the surveillance cultures were calculated among 1894 blood-surface culture pairs by surface sites, recovered organisms and interval between surveillance samples and blood cultures. Results: The overall sensitivity, specificity and PPV of surface cultures were 45.9, 22.4 and 6.8%, respectively. The PPV was highest for the throat/tracheal cultures (11.0%) and lowest for the anal cultures (2.3%). As the time of culturing progressed toward the day of blood culturing, the sensitivity and specificity of the surface cultures significantly increased. Only axillary and throat/tracheal cultures were useful in predicting the microorganisms causing sepsis. Conclusion: Surface cultures could help to predict sepsis pathogens and infection surveillance in preterm infants could be continued with a reduced number of cultured sites focusing on the axilla and throat/trachea.

• Childhood Kidney Diseases
• /
• v.4 no.1
• /
• pp.63-68
• /
• 2000

Purpose: MCDK is regarded as a common cause of abdominal masses in children. And the presentation of the MCDK is usually a unilateral flank mass in the a newborn. Bialteral disease results in either fetal demise or necessity fer renal replacement therapy at birth. This study is designed to assess the clinical features and natural history of the unilateral multicystic dysplastic kidney. Patients and Methods: From January 1987 to January 2000 data were obtained retrospectively on 57 patients (28 boys and 29 girls, age ranged 1day-11years) who had a diagnosis of multicystic dysplastic kidney. The diagnosis of multicystic dysplastic kidney was confirmed by a combination of ultrasonography and radionuclide scan. Voiding cystourethrogram study in 31 patients were done to determine the condition of the contalateral kidney. Restllts: $84\%$ of the patients were diagnosed before birth by antenatal ultrasonography Clinical manifestations of children with postnatal diagnoses were palpable abdominal mass($3.5\%$), abdominal distension($17\%$), and incidental($10.5\%$). The abnormalities in contralateral kidney were hydronephrosis($21\%$), compensatory hypertrophy($12\%$), simple cyst($2\%$), bifid pelvis($2\%$). Surgical management was performed in 20 patients($35\%$) due to recurrent infection, for diagnostic purpose to differentiate from malignancy and abdominal distention. Follow-up in the remaining 37 patients continued (mean 18 months) and results of sonogram findings were involution change in 23 patients($40\%$) and no interval changes in 13 patient($23\%$). Conclusions : The apparent tendency to regression of the dysplastic kidney and no difference in the number of complications justify a conservative management rather than operative intervention except in associated severe complications such as urinary tract infection or rupture of cysts.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.3
• /
• pp.295-303
• /
• 1999

An experiment was conducted to evaluate the possibility of using basic oxygen furnace (BOF) slag as a soil conditioner in rice paddy field. In 1997, rice (Oryza sativa B. cv. Dongjinbyeo) crop was cultivated under different application rates of BOF slag at three different places, Inandong Sunchon city, Youjunglee Bosung province, and Nampyung Najoo city. In each paddy field, five treatments, four application rate of BOF slag (0, 4, 8, $12Mg\;ha^{-1}$) and one application rate of lime ($2Mg\;ha^{-1}$) were tried with three replications. Plant height, number of tillers per hill, leaf area per hill, leaf dry weight, calm dry weight or shoot dry weight per hill were measured five times at the interval of seven days. Chemical contents of rice plants and soil were also measured at the same sampling date Yield were estimated by harvesting $6.6m^2$ per experimental unit and yield components were measured by sampling 10 plants per experimental unit at the harvest date. Application of BOF slag hardly affected contents of soil organic matter, available phosphate and potassium in soil. Soil pH and contents of Ca, Mg, Fe and $SiO_2$ enhanced as BOF slag rate increased. Enhancement of soil pH by ROF slag treatment appeared to be closely related with increase in soil Ca content. Application tate of $2Mg\;ha^{-1}$ of lime showed almost the same effect, in increase of soil Ca content as application rate of $4{\sim}8Mg\;ha^{-1}$ of BOF slag, Fe content in soil decreased sharply as time passed after slag treatment and stabilized more or less at the later sampling date. Contents of inorganic matter in plant such as total nitrogen, phosphate, potassium and Mg were not affected by BOF slag treatment. However, contents of Ca, Fe, and $SiO_2$ in plants increased as slag rate became higher. The growth of rice plants with BOF slag treatment was more or less slower but continued persistently up to the later growth stage, so that growth of plants with BOF slag treatment was almost the same nr even greater than that of control or lime treatment. However, BOF slag rate of $12Mg\;ha^{-1}$ seemed to be too high because all the measurements of plant, growth at this rate showed lower values than those of other treatments at all the sampling dates. Treatments of BOF slag $4Mg\;ha^{-1}$ or $8Mg\;ha^{-1}$ showed higher rough rice yield than other treatments, so that the optimum BOF slag ratein rice paddy field seemed to be in the rage of $4{\sim}8Mg\;ha^{-1}$.

• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.1014-1024
• /
• 2010

Pepper ($Capsicum$ spp.) anthracnose caused by $Colletotrichum$ $acutatum$ is a destructive disease susceptible to areas where chili peppers are grown. $Capsicum$ $baccatum$ var. $pendulum$ (Cbp) is resistant to anthracnose and has actively been used for interspecific hybridization for the introgression of resistance gene(s) into cultivated chili peppers. The goals of this study were to determine the inheritance of resistance to anthracnose within $Capsicum$ $baccatum$ and to map quantitative trait loci (QTLs) for the anthracnose resistance. A genetic mapping population consisting of 126 $F_2$ plants derived from a cross between $Capsicum$ $baccatum$ var. $pendulum$ (resistant) and $Capsicum$ $baccatum$ 'Golden-aji' (susceptible) was used for linkage mapping. The linkage map was constructed with 52 SSRs, 175 AFLPs, and 100 SRAPs covering 1,896cM, with an average interval marker distance of 4.0cM. Based on this map, the number, location, and effect of QTLs for anthracnose resistance were studied using plants inoculated in the laboratory and field. A total of 19 quantitative trait loci (2 major QTLs and 16 minor QTLs) were detected. Two QTLs ($An8.1$, $An9.1$) showed 16.4% phenotypic variations for anthracnose resistance after wounding inoculation. In addition, five minor QTL loci ($An7.3$, $An7.4$, $An4.1$, $An3.1$, $An3.2$) showed a total of 60.73% phenotypic variations of anthracnose resistance in the field test. Several significant QTLs were also detected and their reproducibility was confirmed under different inoculation conditions. These QTLs are now being confirmed with different breeding populations. Markers tightly linked to the QTLs that are reliable under different environmental conditions will help to determine the success of marker-assisted selection for anthracnose -resistant breeding programs in chili pepper.