• Wind and Structures
• /
• v.13 no.5
• /
• pp.433-449
• /
• 2010

Wind tunnel model tests were conducted for a residential apartment block located within the complex terrain of The Hong Kong University of Science and Technology (HKUST). The test building is typical of medium-rise residential buildings in Hong Kong. The model study was conducted using modelling techniques and assumptions that are commonly used to predict design wind loads and pressures for buildings sited in regions of significant topography. Results for the building model with and without the surrounding topography were compared to investigate the effects of far-field and near-field topography on wind characteristics at the test building site and wind-induced external pressure coefficients at key locations on the building facade. The study also compared the wind tunnel test results to topographic multipliers and external pressure coefficients determined from nine international design standards. Differences between the external pressure coefficients stipulated in the various standards will be exacerbated when they are combined with the respective topographic multipliers.

• Wind and Structures
• /
• v.8 no.4
• /
• pp.283-294
• /
• 2005

This paper describes the work of the Working Group on wind pressure coefficients on low-rise structures, one of the groups set up by the International Association of Wind Engineering in 1999. General aspects of wind loading on low-rise structures are summarized. The definition, derivation and codification of loading coefficients is described. Comparisons of pressure coefficients on low rise structures are made between a selection of wind loading standards. Recommendations for consistency and for the harmonization of these coefficients are given.

• Wind and Structures
• /
• v.8 no.4
• /
• pp.251-268
• /
• 2005

This paper describes the work of the International Association for Wind Engineering Working Group E -Dynamic Response, one of the International Codification Working Groups set up at the Tenth International Conference on Wind Engineering in Copenhagen. Comparisons of gust loading factors and wind-induced responses of major codes and standards are first reviewed, and recent new proposals on 3-D gust loading factor techniques are introduced. Then, the combined effects of along-wind, crosswind and torsional wind load components are discussed, as well as the dynamic characteristics of buildings. Finally, the mathematical forms of along-wind velocity spectra for along-wind response calculation and codification of acceleration criteria are discussed.

• Korean Journal of Child Studies
• /
• v.37 no.6
• /
• pp.185-200
• /
• 2016

Objective: This study examined the code of ethics, which offers guidelines for early childhood teachers' ethical decisions and practices. Results and Conclusion: In the second section of this paper, the meaning of the code of ethics is reviewed. The issues of the code of ethics are also investigated to resolve moral and ethical dilemmas and to maintain high standards of professional conduct in early childhood care and education. In the third section of this paper, a comparison of the ethical codes in South Korea, Japan, the United Kingdom, and the United States is conducted. Based on the results raised in relation to the code of ethics principles and the results of comparing domestic and international ethics codes, the fourth section of this paper focuses on three topics in the current and future direction of the Korean code of ethics: (a) concreteness and clarity, (b) switching from the viewpoint of least harm to the viewpoint of maximum benefit, and (c) the range of benefits of the code of ethics. Then, including the existence of the last two codes of ethics, we discuss the direction of future difficulties currently associated with the situation in Korea.

• Journal of Biosystems Engineering
• /
• v.39 no.3
• /
• pp.158-165
• /
• 2014

Purpose: The objective of this paper was to compare test standards regarding the performance and safety of agricultural tractors to identify the differences in test conditions, measurement tolerances, and test procedures. Based on the comparison, some recommendations were proposed for possible revisions or improvements to current tractor test standards. Methods: The test standards and codes of major standards development organizations (SDOs), such as the Organization for Economic Cooperation and Development (OECD), the International Organization for Standardization (ISO), the American Society of Agricultural and Biological Engineers (ASABE), EC type approval, and the board of actions of the Nebraska Tractor Test Laboratories (NTTL), were selected and analyzed. Comparison of the test standards: The ISO provides references for fuel and lubricants for tractor tests, and the OECD provides additional measurements for calculating fuel consumption characteristics during the power take-off (PTO) tests. The ISO, EC type approval, and the ASABE provide PTO protective device and the safety requirements. During drawbar power tests, seven transmission ratios are selected for fully automatic transmissions, according to the OECD. In case of hydraulic lift tests, ISO 789-2 and OECD Code 2 advise the use of a static lift force, while SAE J283 advises the use of additional dynamic lift capacity tests for a better representation of in-field operations. The OECD, the ISO, and EC type approval determine the seat index point (SIP), whereas the ASABE determines the seat reference point (SRP) for roll-over protective structure (ROPS) tests. Diversified measurement tolerances were among the braking performance test standards. The European Union (EU) has developed daily limits for vibration exposures with adaptations from ISO 2631-1. Electromagnetic compatibility evaluations are emerging of high-efficiency tractors due to the long-term conformance to electromagnetic emissions and interferences. Comparisons of tractor test standards discussed in this paper are expected to provide useful information for tractor manufacturers and standards development personnel to improve the performance and safety test standards of tractors.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.511-525
• /
• 2021

Aluminium outfitting is widely used in offshore platforms owing to its anti-corrosion ability and its light weight. However, various standards exist (ISO, NORSOK and EN) for the design of handrails used in offshore platforms, and different suppliers have different criteria. This causes great confusion for designers. Moreover, the design load required by the standards is not clearly defined or is uncertain. Thus, many offshore projects reference previous project details or are conservatively designed without additional clarification. In this study, all of the codes and standards were reviewed and analysed through prior studies, and data on variable factors that directly and indirectly affect the handrails applied to offshore platforms were analysed. A total of 50 handrail design load scenarios were proposed through deterministic and probabilistic approaches. To verify the proposed new handrail design load selection scenario, structural analysis was performed using SACS (offshore structural analysis software). This new proposal through deterministic and probabilistic approaches is expected to improve safety by clarifying the purpose of the handrails. Furthermore, the acceptance criteria for probabilistic scenarios for handrails suggest considering the frequency of handrail use and the design life of offshore platforms to prevent excessive design. This study is expected to prevent trial and error in handrail design while maintaining overall worker safety by applying a loading scenario suitable for the project environment to enable optimal handrail design.

• Journal of Fisheries and Marine Sciences Education
• /
• v.3 no.1
• /
• pp.44-49
• /
• 1991

The IMO has made constant efforts for global safety control of fishing vessels operation. As the result varieties of documents, for example, the international conventions, the resolutions, the recommendations and codes were adopted by the Organization. And the Organization contributed to preparing the international standards of marine safety by persuading the member countries to ratify and enforce the documents. The author inspected the content of IMO's activities and recent movement to ensure the safety of fishing vessels and their crew, and obtained the following results in connection with domestic regime. The first is the future prospect and countermeasure against revision and effectuation of "The Torremolinos International Convention for the Safety of Fishing Vessels, 1977". The Authority of Korean Government should make preparations to receive into national legislation as a performance of liability of a party country to the Convention. Secondly, the current domestic legal system has not any serious issues on the education and training for the fishing vessels crew. It is merely necessary to establish and operate the training course for the low grade marine officers.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.1
• /
• pp.25-31
• /
• 2003

In 1994, the International Maritime Organization (IMO) adopted the International Safety Management Code (ISM Code) as SOLAS convention to ensure the safe operation of ships and to protect marine environment from pollution In December 2002, the IMO adopted the International Ship and Port Facility Security Code (ISPS Code) in the Chapter XI-1 of SOLAS to ensure the security of ships, crew, cargo and port facility. With 1 July 2004 being the coming into effective date of ISPS Code, there is a sense of urgency among the shipping companies and port authorities to accomodate the ISPS Code. Although both the ISM Code and the ISPS Code are based on the management system concept introduced in the ISO 9001, two Codes pursue different objective. Accordingly, it is meaningful to compare and analyze the requirements of three standards. In this article, the backgrounds, principles and requirements of three standards are analyzed and presented to offer several suggestions on the establishment and implementation of security measures in compliance with the ISPS Code to the shipping industry in time.

• Computers and Concrete
• /
• v.25 no.2
• /
• pp.95-109
• /
• 2020

This paper aims to analytically study the effect of loading conditions and confinement type on the mechanical properties of the concrete-steel composite columns under axial compressive loading. The axial loading is applied to the composite columns in the two ways; only on the concrete core, and on the concrete core and steel tube simultaneously, which are called steel tube-confined concrete (STCC) and concrete-filled steel tube (CFST) columns, respectively. In addition, the confinement is investigated in the three types of passive, short-term active and long-term active confinement. Nonlinear finite element 3D models for analyzing these columns are developed using the ABAQUS program, and then these models are verified with respect to the recent experimental results reported by the authors on the STCC and CFST columns experiencing active and passive confinements. Axial and lateral stress-strain curves as well as the failure mode for qualitative verification, and compressive strength for quantitative verification are considered. It is found that there is a good consistency between the finite element analysis results and the experimental ones. In addition, a parametric study is performed to evaluate the effect of axial loading type, prestressing ratio, concrete compressive strength and steel tube diameter-to-wall thickness ratio on the compressive behavior of the composite columns. Finally, the compressive strength results of CFST specimens obtained via the finite element analysis are compared with the values specified by the international codes and standards including EC4, CSA, ACI-318, and AISC, with the results showing that ACI-318 and AISC underestimate the compressive strength of the composite columns, while EC4 and CSA codes present overestimated values.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.182-183
• /
• 2006

It has been studied about the important consideration in designing and construction of the reliability assessment facilities including the combined testing system for simulating condition of acceleratedly deteriorated environment, which enable to test and evaluate the large-sized HV power apparatus without any disassembly up to transmission class in this paper. Also it is described simply about its ratings and main technical specifications and trial running of the system. To evaluate the performance characteristics against combined test condition for various power installation, especially for the polymer type insulators and kinds of bushings, brief investigation and an analysis of test objects and related international codes and standards have been conducted.