1 |
American Society of Civil Engineers (2005), Minimum design loads for buildings and other Structures, SEI/ASCE 7-05, ASCE, Reston, VA.
|
2 |
Architectural Institute of Japan (2004), Recommendations for loads on buildings, (in English), AIJ, Tokyo.
|
3 |
British Standards Institution (1997), Loading for buildings – Part 2: Code of practice for wind loads, BS 6399-2, BSI, London, UK.
|
4 |
Buildings Department (2004), Code of Practice on Wind Effects in Hong Kong, The Government of the Hong Kong Special Administrative Region, Hong Kong.
|
5 |
China Architecture and Building Press (2006), Load code for the design of building structures, China National Standard, GB 50009-2001, CABP, Beijing, China.
|
6 |
Chock, G.Y.K. and Cochran, L. (2006), Erratum to "Modeling of topographic wind speed effects in Hawaii", J. Wind Eng. Ind. Aerod., 94(3), 173-187.
DOI
ScienceOn
|
7 |
C.E.N. (European Committee for Standardization) (2005) Eurocode 1: Actions on structures - General actions - Part 1-4: Wind actions, prEN 1991-1-4.6, C.E.N., Brussels.
|
8 |
Glanville, M.J. and Kwok, K.C.S. (1997), "Measurements of topographic multipliers and flow separation from a steep escarpment: Part II. Model-scale measurements", J. Wind Eng. Ind. Aerod., 69-71, 893-902.
DOI
ScienceOn
|
9 |
Holmes, J.D. (2007), Wind loading of structures, 2nd Edition, Taylor and Francis Group, London, UK.
|
10 |
Holmes, J.D., Banks, R.W. and Paevere, P. (1997), "Measurements of topographic multipliers and flow separation from a steep escarpment. Part I. Full scale measurements", J. Wind Eng. Ind. Aerod., 69-71, 885-892.
DOI
|
11 |
Holmes, J.D., Baker, C.J., English, E.C. and Choi, E.C.C. (2005), "Wind structure and codification", Wind Struct., 8(4), 235-250.
과학기술학회마을
DOI
|
12 |
Indian Standards Institution (1987), Code of practice for design loads (other than earthquake) for buildings and structures, Part 3 Wind Loads, Second Revision, Indian Standard, IS 875: Part 3, India.
|
13 |
Kondo, K., Tsuchiya, M. and Sanada, S. (2002), "Evaluation of effect of micro-topography on design wind velocity", J. Wind Eng. Ind. Aerod., 90(12-15), 1707-1718.
DOI
ScienceOn
|
14 |
Letchford, C.W., Holmes, J.D., Hoxey, R. and Robertson, A. (2005), "Wind pressure coefficients on low-rise structures and codification", Wind Struct., 8(4), 283-294.
과학기술학회마을
DOI
|
15 |
Miller, C.A. and Davenport, A.G. (1998), "Guidelines for the calculation of wind speed-ups in complex terrain", J. Wind Eng. Ind. Aerod., 74-76, 189-197.
DOI
ScienceOn
|
16 |
National Research Council of Canada (2005), User's Guide – NBC 2005 Structural Commentaries (Part 4 of Division B).
|
17 |
St. Pierre, L.M., Kopp, G.A., Surry, D. and Ho T.C.E. (2005), "The UWO contribution to the NIST aerodynamic data base for wind loads on low buildings: Part 2. Comparison of data with wind load provisions", J. Wind Eng. Ind. Aerod., 93, 31-59.
DOI
ScienceOn
|
18 |
Standards Australia/Standards New Zealand (2002), Australia/New Zealand Standard, Structural design actions Part 2: Wind actions, AS/NZS 1170.2.
|
19 |
Uematsu, Y. and Isyumov, N. (1999), "Wind pressures acting on low-rise buildings", J. Wind Eng. Ind. Aerod., 82(1-3), 1-25.
DOI
ScienceOn
|
20 |
Weng, W., Taylor, P.A. and Walmsley, J.L. (2000), "Guidelines for airflow over complex terrain: model developments", J. Wind Eng. Ind. Aerod., 86(2-3), 169-186.
|
21 |
Zhang, X. (2003), "Introduction and some observations on 2002 Chinese Wind Load Code", Proceedings of the 11th International Conference on Wind Engineering, Lubbock, Texas, USA, June.
|