Wind and Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Wind pressure coefficients on low-rise structures and codification

  • Received : 2003.10.01
  • Accepted : 2004.06.11
  • Published : 2005.08.25
⟨ Previous Next ⟩

Abstract

This paper describes the work of the Working Group on wind pressure coefficients on low-rise structures, one of the groups set up by the International Association of Wind Engineering in 1999. General aspects of wind loading on low-rise structures are summarized. The definition, derivation and codification of loading coefficients is described. Comparisons of pressure coefficients on low rise structures are made between a selection of wind loading standards. Recommendations for consistency and for the harmonization of these coefficients are given.

Keywords

References

  1. AIJ (1996), Architectural Institute of Japan, AIJ Recommendations for loads on buildings, English translation, AIJ, Tokyo, 1996.
  2. ASCE7 (2002), American Society of Civil Engineers, Minimum design loads for buildings and other structures, ASCE 7-02, ASCE, Reston VA, 2002.
  3. AS/NZS1170.2 (2002), Standards Australia, Structural design actions Part 2: Wind Actions, AS/NZS1170.2,Sydney, 2002.
  4. BS6399 (1997), British Standards Institution, Loading for Buildings, Part 2, Code of Practice for wind loads.BS6399: Part 2, London, 1997.
  5. Blessmann, J. (1991), Acao do vento em telhados, SAGRA, Porto Alegre, Brazil, 1991.
  6. CEN (European Committee for Standardization) (1995), Eurocode 1: Basis of Design and Actions on structures -Part 2.4: Wind actions, ENV1991-2-4, Brussels, 1995.
  7. CEN (European Committee for Standardization) (2004), Eurocode 1: Actions on structures - Part1-4: Generalactions - Wind actions, prEN1991-1-4.6, Brussels, 2004.
  8. China Construction Industry Publishers (2001), Load Code for the design of building structures, GB 50009-2001.
  9. Cochran, L.S. and Cermak, J.E. (1992), "Full- and model-scale cladding pressures on the Texas Tech Universityfull-scale experimental building", J. Wind Eng. Ind. Aerodyn., 43, 1589-1600. https://doi.org/10.1016/0167-6105(92)90374-J
  10. Davenport, A.G.., Surry D., and Stathopoulos, T. (1977), "Wind loads on low-rise buildings. Final report of Phases I and II", University of Western Ontario., Boundary Layer Wind Tunnel Report, BLWT-SS8-1977.
  11. Ginger, J.D. and Letchford, C.W. (1994), "Wind loads on planar canopy roofs. Part II. Fluctuating pressuredistributions and correlations", J. Wind Eng. Ind. Aerodyn., 51, 353-370. https://doi.org/10.1016/0167-6105(94)90068-X
  12. Ginger, J.D. and Holmes, J.D. (2003), "Effect of building length on wind loads on low-rise buildings with asteep roof pitch", J. Wind Eng. Ind. Aerodyn., 91, 1377-1400. https://doi.org/10.1016/j.jweia.2003.08.003
  13. Guerts, C., Blackmore, P., Hansen, S.O., Hortmanns, M., Sedlacek, G., Spehl, P., v Staalduinen, P., and Zimmerli,B. (2001), "Transparency of pressure and force coefficients", Proceedings 3rd European & AfricanConference on Wind Engineering, Eindhoven, The Netherlands, 2-6 July 2001, 165-172, Eindhoven Universityof Technology, 2001.
  14. Holmes, J.D. (1983), Wind Loads on Low-rise Buildings - a Review, CSIRO, Division of Building Research(Australia), 1983.
  15. Holmes, J.D. (2001), Wind Loading of Structures, Spon Press, London.
  16. Holmes, J.D., Baker, C.J., English, E.C., and Choi, E.C.C. (2005), "Wind structure and codification", Wind andStruct., An Int. J., 8(4), 235-250. https://doi.org/10.12989/was.2005.8.4.235
  17. Holmes, J.D., Kasperski, M., Miller, C.A., Zuranski, J., and Choi, E.C.C. (2005), "Extreme wind prediction andzoning", Wind and Struct., An Int. J., 8(4), 269-281. https://doi.org/10.12989/was.2005.8.4.269
  18. Hoxey, R.P. and Richardson, G.M. (1984), "Measurements of wind loads on full-scale film plastic cladgreenhouses", J. Wind Eng. Ind. Aerodyn., 16, 57-83
  19. ISO (1997), International Standards Organization, Wind Actions on Structures, ISO 4354, Geneva, 1997.
  20. Jensen, M. and Franck, N. (1965), Model-scale Tests in Turbulent Wind, Part II. Danish Technical Press.
  21. Johnson, G.L., Surry, D., and Ng, W.K. (1985), Turbulent Wind Loads on Arch-roof Structures: a Review ofModel and Full-scale Results and the Effects of Reynolds Number, 5th. U.S. National Conference on WindEngineering, Lubbock, Texas, November 6-8, 1985.
  22. Kasperski, M., Geurts, C., and Goliger, A. (2005), "Codification for wind loading: reliability and code level",Wind and Struct., An Int. J., 8(4), 295-307. https://doi.org/10.12989/was.2005.8.4.295
  23. Krishna, P. (1995), "Wind loads on low-rise buildings - a review", J. Wind Eng. Ind. Aerodyn., 55, 383-396.
  24. Letchford, C.W. and Holmes, J.D. (1994), "Wind loads on free-standing walls in turbulent boundary layers", J.Wind Eng. Ind. Aerodyn., 51, 1-27. https://doi.org/10.1016/0167-6105(94)90074-4
  25. Letchford, C.W. (2001), "Wind loads on rectangular signboards and hoardings", J. Wind Eng. Ind. Aerodyn., 89,135-151. https://doi.org/10.1016/S0167-6105(00)00068-4
  26. Letchford, C.W. and Ginger, J.D. (1992), "Wind loads on planar canopy roofs. Part I. Mean pressuredistributions", J. Wind Eng. Ind. Aerodyn., 45, 25-45. https://doi.org/10.1016/0167-6105(92)90004-T
  27. NRCC (1995), National Building Code of Canada (NBCC 1995), National Research Council Canada, Ottawa, 1995.
  28. Robertson, A.P., Hoxey, R.P., and Moran, P. (1985), "A full-scale study of wind loads on agricultural canopyroof ridged structures and proposals for design", J. Wind Eng. Ind. Aerodyn., 21, 113-125.
  29. Robertson, A.P., Hoxey, R.P., Short, J.L., Ferguson, W.A., and Blackmore, P.A. (1997), "Wind loads on boundarywalls: Full-scale studies", J. Wind Eng. Ind. Aerodyn., 69-71, 451-459. https://doi.org/10.1016/S0167-6105(97)00176-1
  30. Stathopoulos, T. (1984), "Wind loads on low-rise buildings - a review of the state of the art", Eng. Struct., 6,119-135. https://doi.org/10.1016/0141-0296(84)90005-1
  31. Stathopoulos, T. (1975), "Evaluation of wind loads on low-rise buildings, a brief historical review", in A State ofthe Art in Wind Engineering, Wiley Eastern, New Delhi.
  32. Pierre, L. (2002), "Evaluation of wind load provisions for low buildings", MEngSc Thesis, University ofWestern Ontario, May 2002.
  33. St. Pierre, L., Kopp, G.A., Surry, D., and Ho, T.C.E. (2005), "The UWO contribution to the NIST aerodynamicdatabase for wind loads on low buildings: Part 2 comparison of data with wind load provisions", J. Wind Eng.Ind. Aerodyn., 93, 31-59. https://doi.org/10.1016/j.jweia.2004.07.007
  34. Surry, D. (1999), "Wind loads on low-rise buildings - past, present and future", Proceedings, 10th InternationalConference on Wind Engineering, Copenhagen, 21-24 June, 1999, A.A.Balkema, Rotterdam, 105-114.
  35. Tamura, Y., Kareem, A., Solari, G., Kwok, K.C.S., Holmes, J.D., and Melbourne, W.H. (2005), "Dynamicresponse and codification", Wind and Struct., An Int. J., 8(4), 251-268. https://doi.org/10.12989/was.2005.8.4.251
  36. Zhang, X., (2003), "Introduction and some observations on the 2002 Chinese wind load code", 11thInternational Conference on Wind Engineering, Lubbock TX, USA, 2-5 June 2003.

Cited by

  1. The effects of topography on local wind-induced pressures of a medium-rise building vol.13, pp.5, 2005, https://doi.org/10.12989/was.2010.13.5.433
  2. Comparisons of Aerodynamic Data with the Main Wind Force-Resisting System Provisions of ASCE 7-16. I: Low-Rise Buildings vol.147, pp.3, 2021, https://doi.org/10.1061/(asce)st.1943-541x.0002925