• 전기학회논문지
• /
• 제57권12호
• /
• pp.2255-2262
• /
• 2008

This paper presents a design parameter calculation methodology and its realization to construction for the damped oscillatory impulse current generator(ICG) modelled as damping factor $\alpha$. Matlab internal functions, "fzero" and "polyfit" are applied to find a which are solutions of second order nonlinear equation related with three wave parameters $T_{1},T_{2}$ and $I_{os}$. The calculation results for standard impulse current waveforms such as 4/10${\mu}s$, 8/20${\mu}s$ and 30/80${\mu}s$ show very good accuracy and this results make it possible to extend to generalization in the design of damped oscillatory lCG with any capacitor. 8/20${\mu}s$ ICG based on the calculated design circuit parameters is fabricated in consideration of the nonlinear load(MOV) variation. Comparisons of the tested waveforms with the designed estimation show error within 10% for the waveform tolerance recommended in IEC 60060-1 and IEEE std. C62.45.

• ETRI Journal
• /
• 제27권4호
• /
• pp.385-393
• /
• 2005

This paper presents an application of digital signal processing to data acquired by the radio imaging method (RIM) that was adopted to measure moisture distribution inside the human body. RIM was originally developed for the mining industry; we are applying the method to a biomedical measurement because of its simplicity, economy, and safety. When a two-dimensional image was constructed from the measured data, the method provided insufficient resolution because the wavelength of the measurement medium, a weak electromagnetic wave in a VHF band, was longer than human tissues. We built and measured a phantom, a model simulating the human body, consisting of two water tanks representing large internal organs. A digital equalizer was applied to the measured values as a weight function, and images were reconstructed that corresponded to the original shape of the two water tanks. As a result, a two-dimensional image containing two individual peaks corresponding to the original two small water tanks was constructed. The result suggests the method was applicable to biomedical measurement by the assistance of digital signal processing. This technique may be applicable to home-based medical care and other situations in which safety, simplicity, and economy are important.

• Journal of Yeungnam Medical Science
• /
• 제2권1호
• /
• pp.77-80
• /
• 1985

심전도에 의한 R-R 간격변동은 자율신경계의 기능을 검사하는데 매우 유용하고 또한 교감 신경계와 부교감신경계의 가능을 정량적으로 알아낼 수 있을 것으로 사료되었다. 특히, 당뇨병질환에 있어서 자율신경계의 dysfunction현상을 고찰하는데 매우 유용할 것으로 기대된다(Fig.5 참조). 그러나 임상에 직접 적용시켜온 바로는 기립시, 심호흡시에 발생되는 근전도에 의한 잡음이 간혹 발생되는 경우가 있는데 이것은 전극접착법과 무선송신기에 의해 제거될 것으로 기대되며 향후의 과제로 남아있다.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.342-349
• /
• 2011

The purpose of this paper is to describe experimental results about the butt welding and bead on plate welding of the high power Continuous Wave (CW) Fiber laser for Ultra-low carbon Interstitial Free(IF) steel plate for gear part of car. After being welded of the gear parts by the fiber laser and electron beam Microstructures of melting zone had been mixed acicular, granular bainitic, quasi-polygonal and widmanstatten ferrite because of a radical thermal diffusion after welding, difference of critical volume and grain size. As a result of experiment, when gear parts were welded by the fiber laser and electron beam, the fiber laser welding has been stable properties without internal defects more than the electron beam welding. Therefore it has the very advantages of welding high quality and productivity more than conventional melting method. The optimal welding processing parameters for gear parts were as follows : the laser power and welding speed were 3kWatt, 30mm/sec respectively. At this time heat input was $21.2{\times}10^3J/cm^2$.

• 한국연소학회지
• /
• 제22권1호
• /
• pp.8-13
• /
• 2017

Ignition delay time of methane/oxygen mixture is measured experimentally with the shock tube in order to obtain the data for high pressure conditions where gas turbines and internal combustion engines are operating. The shock tube experiment is validated first over the temperature range of 1400-2000 K at 10 bar and with the various equivalence ratios of 0.5, 1 and 2. The measured ignition delays are compared with the data from the literatures. And then, experiments are conducted for non-explored conditions, i.e., at 40 bar and with the equivalence ratio of 1.5. The present experimental data show a good agreement with the available ones from the literatures and reasonable dependence on pressure and equivalence ratio. In addition, the effects of the temperature and equivalence ratio on ignition delay time are analyzed.

• 한국응급구조학회지
• /
• 제9권1호
• /
• pp.95-99
• /
• 2005

Penetrating neck trauma by gunshot injury involving tracheobronchial tree is rare in Korea. Extensive tissue damage by cavitation, tissue fragmentation and shock wave transmission of high-velocity projectile along with associated organ injury renders high rate of mortality and morbidity. A 28 year old man in military service with gunshot wound in left cervical area presented initial symptoms of severe dyspnea and subcutaneous emphysema. Computed tomography of chest and cervical region as well as bronchoscopic evaluation was performed to confirm highly suspected injury to cervical trachea. Surgical exposure was established through a low collar incision; the damaged segment of 3.5 cm length including 2-4th tracheal rings was resected out and end-to-end anastomosis was performed. Bleeding from lacerated anterior jugular vein was controlled by ligation of both ends and a K2 bulllet was found upon inner border of body of first rib, medial to right carotid sheath and removed out. Cervical esophagus, carotid artery, internal jugular vein and recurrent laryngeal nerve were spared. Extubation was done on the first postoperative day and postoperative course until discharge on nineth postoperative day remained uneventful.

• 한국전기전자재료학회논문지
• /
• 제32권6호
• /
• pp.444-447
• /
• 2019

It was proven that the light outputs of blue GaN-based light-emitting diodes (LEDs) was seriously influenced by the application of external stress. We have simulated the wave function overlap of an electron and hole, which are significantly reduced by the development of stress. Consequently, its internal quantum efficiency decreased from 67.0% to 37.5%. To experimentally investigate the effect of stress, we designed and prepared a special zig system. By applying external tensile stress to compensate for the compressive stress innately developed in Blue LEDs, it was found that the optical output was greatly enhanced from 83.1 mcd to 117.2 mcd at a current of 100 mA, an increase of approximately 41%. In contrast, when the compressive stress is developed more by external compressive stress, we observed that the light output power was reduced from 89.0 mcd to 80.7 mcd, a decrease of approximately 9.3%.

• 약학회지
• /
• 제48권5호
• /
• pp.278-284
• /
• 2004

In order to determine the bioavailability of c1onazepam, an anxiolytic drug, a simple, rapid and sensitive HPLC analysis was developed in healthy Korean volunteers. The analysis system was validated in specificity, accuracy, precision and linearity. The analysis condition we established was 2.58 min and 5 ng/$m\ell$ in retention time and limit of quantitation of c1onazepam, respectively, using reverse-phase C18 column connected to UV detector. Quantitation was performed at 235 nm wave length with p-hydroxybenzoic acid ethyl ester as internal standard. The method involved a simple extraction. In order to study blood level profiles as a function of time, eight volunteers were enrolled and orally took 6 mg clonazepam once. The blood samples were collected from 0 to 120 h after the drug administration. Mean AUC and Cmax value were 1028.17$\pm$568.165 (ng/$m\ell$$.$hr) and 41.25$\pm$10.82 (ng/$m\ell$), respectively. And mean Tmax and T$_{1}$2/ value were 1.08$\pm$0.42 (hr) and 30.78$\pm$3.26 (hr). From the results we determine the pharmacokinetic characteristics of clonazepam in Korean people using a newly developed and useful HPLC method.

• Current Optics and Photonics
• /
• 제1권1호
• /
• pp.65-72
• /
• 2017

We propose a nearly lossless, compact, electrically modulated vertical directional coupler, which is based on the controllable evanescent coupling in a previously proposed graphene-assisted total internal reflection (GA-FTIR) scheme. In the proposed device, two single-mode waveguides are separate by graphene-$SiO_2$-graphene layers. By changing the chemical potential of the graphene layers with a gate voltage, the coupling strength between the waveguides, and hence the coupling length of the directional coupler, is controlled. Therefore, for a properly chosen, fixed device length, when an input wave is launched into one of the waveguides, the ratio of their output powers can be controlled electrically. The operation of the proposed device is analyzed, with the dispersion relations calculated using a model of a one-dimensional slab waveguide. The supermodes in the coupled waveguide are calculated using the finite-element method to estimate the coupling length, realistic devices are designed, and their performance was confirmed using the finite-difference time-domain method. The designed $3{\mu}m$ by $1{\mu}m$ device achieves an insertion loss of less than 0.11 dB, and a 24-dB extinction ratio between bar and cross states. The proposed low-loss device could enable integrated modulation of a strong optical signal, without thermal buildup.

• 한국전자통신학회논문지
• /
• 제16권2호
• /
• pp.255-260
• /
• 2021

최근 화석연료의 고갈로 인해 전기 자동차의 중요성이 점차 커지고 있다. 전기 자동차를 사용하기 위해서는 자동차에 내장된 배터리를 수시로 충전해야 한다. 전기 자동차는 소음, 진동에 있어 매우 뛰어난 성능을 구현한다. 하지만 배터리의 한계상 1회 충전 시 주행거리가 내연 자동차보다 상당이 짧으며, 배터리 충전 시간도 주유 시간에 비해 상대적으로 매우 오래 걸린다는 단점이 있다. 전기 자동차용 배터리를 충전하는 방식은 플러그인 방식과 무선 충전 방식이 있다. 본 논문에서는 전기 자동차용 무선 충전 기술에 대한 소개와 주요 국가의 기술 개발 현황 및 표준을 소개하였다.