비선형 부하를 고려한 감쇠 진동형 임펄스 전류발생기의 설계 기법

Optimum Design Methodology of the Damped Oscillatory Impulse Current Generator Considering a Nonlinear Load

  • 발행 : 2008.12.01

초록

This paper presents a design parameter calculation methodology and its realization to construction for the damped oscillatory impulse current generator(ICG) modelled as damping factor $\alpha$. Matlab internal functions, "fzero" and "polyfit" are applied to find a which are solutions of second order nonlinear equation related with three wave parameters $T_{1},T_{2}$ and $I_{os}$. The calculation results for standard impulse current waveforms such as 4/10${\mu}s$, 8/20${\mu}s$ and 30/80${\mu}s$ show very good accuracy and this results make it possible to extend to generalization in the design of damped oscillatory lCG with any capacitor. 8/20${\mu}s$ ICG based on the calculated design circuit parameters is fabricated in consideration of the nonlinear load(MOV) variation. Comparisons of the tested waveforms with the designed estimation show error within 10% for the waveform tolerance recommended in IEC 60060-1 and IEEE std. C62.45.

키워드

참고문헌

  1. IEC Publication 60060-1, "High Voltage Test Techniques. Part 1: General Definitions and Test Requirements", Geneva, 1989
  2. M. Modrusan, "HAEFLY: Normalized Calculation of Impulse Current Circuits for Given Impulse Currents", Basel, Switzerland, 1979
  3. C. Lorthongkam, and C. Thomrongtappitak, "Design of impulse high-current generator using the IMC simulation program", Power System Technology, 2000. Proceedings. PowerCon, Vol.2, pp. 631-635, 2000
  4. S. pack and S. Jaufer, "Evaluation of an impulse current generator using numerical simulation tools", IPST 2003 in New Orleans
  5. K. Kishore, et aI, "On the development of an impulse current generator", Electromagnetic Interference and Compatibility '97, pp. 401-406, Dec. 1997
  6. 일본전기학회, "고전압시험 Hand book", pp. 123-126, 1980.3
  7. D. B. Mongomery, "Solenoid magnet design", Robert R. Kriger Publishing Company, pp. 194, 1980
  8. IEEE Std. C62.45, "IEEE recommended practice on surge testing for equipment connected to low-voltage (1000V and Less) AC power circuits"