• 구강회복응용과학지
• /
• 제24권3호
• /
• pp.283-298
• /
• 2008

이 연구의 목적은 내측연결 임플랜트 시스템의 고정체-지대주-나사간의 계면 적합도를 알아보기 위한 것이다. 실험에 이용된 임플랜트 시스템은 Certain, Xive, Replace, Ankylos, SSII 이다. 이 시스템의 고정체와 지대주를 제조사의 권장 토크로 조인후 액상의 불포화 폴리에스터 용액에 고정한 후 절단하였다. 모든 표본은 절단, 연마후 주사전자 현미경으로 관찰하였다.내측연결 시스템의 적합도를 관찰한 결과, 각 제조사들 사이에 차이는 있으나 대부분의 내측연결 시스템의 경우엔 고정체와 지대주의 접촉은 긴밀히 접촉하는 경향을 가지고 있음을 알 수 있었다. 그러나 지대주와 나사, 고정체와 나사 간에는 다양한 형태의 틈이 존재하였다. 이러한 틈들이 나사의 불안정, 미생물의 군집, 악취 등에 어떠한 영향을 미칠지는 앞으로 계속적인 연구가 필요할 것으로 사료된다.

• The Journal of Advanced Prosthodontics
• /
• 제8권6호
• /
• pp.439-448
• /
• 2016

PURPOSE. The purposes of this study are to evaluate the internal and marginal adaptation of two widely used CAD/CAM systems and to study the effect of porcelain press veneering process on the prosthesis adaptation. MATERIALS AND METHODS. Molar of a lower jaw typodont resin model was prepared by adjusting a 1.0 mm circumferential chamfer, an occlusal reduction of 2.0 mm, and a $5^{\circ}$ convergence angle and was duplicated as an abrasion-resistant master die. The monolithic crowns and copings were fabricated with two different CAD/CAM system-Ceramil and Zirkonzahn systems. Two kinds of non-destructive analysis methods are used in this study. First, weight technique was used to determine the overall fitting accuracy. And, to evaluate internal and marginal fit of specific part, replica technique procedures were performed. RESULTS. The silicone weight for the cement space of monolithic crowns and copings manufactured with Ceramil system was significantly higher than that from Zirkonzahn system. This gap might cause the differences in the silicone weight because the prostheses were manufactured according to the recommendation of each system. Marginal discrepancies of copings made with Ceramil system were between 106 and $117{\mu}m$ and those from Zirkonzahn system were between 111 and $115{\mu}m$. Marginal discrepancies of copings made with Ceramil system were between 101 and $131{\mu}m$ and those from Zirkonzahn system were between 116 and $131{\mu}m$. CONCLUSION. Marginal discrepancy was relatively lower in Ceramil system and internal gap was smaller in Zirkonzahn system. There were significant differences in the internal gap of monolithic crown and coping among the 2 CAD/CAM systems. Marginal discrepancy produced from the 2 CAD/CAM systems were within a reported clinically acceptable range of marginal discrepancy.

• Asia pacific journal of information systems
• /
• 제7권3호
• /
• pp.89-108
• /
• 1997

This study, drawing upon research in innovation theory and Information systems, investigates the relationship among the organizational and innovation characteristics and the extent of internal and external diffusion of EDI in Korean firms. The data for this study were collected from 131 firms that have implemented EDI. The results of the correlation and the multiple regression analysis show that elapsed time and organizational compatibility are the major predictors of EDI diffusion. Specifically, the extent of communication, elapsed time and organizational compatibility are the major predictors of internal diffusion, while centralization, organizational compatibility and elapsed time are closely related to external diffusion of EDI. The results of this study imply that to facilitate the use of EDI widely within and beyond organizations, EDI system should be compatibile with the organizational tasks, values systems and existing information systems.

• International Journal of Control, Automation, and Systems
• /
• 제6권4호
• /
• pp.515-525
• /
• 2008

In this paper, the problem of delay-dependent stabilization for singular systems with multiple internal and external incommensurate constant point delays is investigated. The condition when a singular system subject to point delays is regular independent of time delays is given and it can be easily test with numerical or algebraic methods. Based on Lyapunov-Krasovskii functional approach and the descriptor integral-inequality lemma, a sufficient condition for delay-dependent stability is obtained. The main idea is to design multiple memoryless state feedback control laws such that the resulting closed-loop system is regular independent of time delays, impulse free, and asymptotically stable via solving a strict linear matrix inequality (LMI) problem. An explicit expression for the desired memoryless state feedback control laws is also given. Finally, a numerical example illustrates the effectiveness and the availability for the proposed method.

• 시스템엔지니어링학술지
• /
• 제12권1호
• /
• pp.89-103
• /
• 2016

Due to safety of the plant, it became very clear the importance of study occurrence reactor coolant system (RCS) issues specially the primary water stress corrosion cracking (PWSCC). The Systems Engineering (SE) approach is characterized by the application of a structured engineering methodology for the design of a complex system or component. Robotic devices have been used for internal inspection, maintenance and performing remote welding and inspection in high-radiation areas. In this paper, PWSCC overview and inlay and over lay welding methodology introduced, concept of robotic device that can be inserted into the piping via Steam Generator (SG) main way to access to primary piping of pressurized water reactor (PWR) is developed based on SE methodology. A 3D model of the inspection system was developed along with the APR1400 (Advanced Power Reactor)reactor coolant systems (RCS) and internals with virtual 3D simulation of the operation for visualization to prove the validity of the concept.

• 한국통신학회논문지
• /
• 제34권2A호
• /
• pp.139-146
• /
• 2009

본 논문은 TDD(Time Division Duplex) 배열안테나 시스템에서 빔형성을 할 때와 송신 전력을 할당하는 경우에 필요한 송수신 RF 단의 진폭과 위상 오차를 교정하는 평균자동내부순환교정 방법을 제안한다. 제안된 기술은 기존의 부가적인 내부 신호발생기나 외부의 기준신호를 필요로 하지 않으며 송수신기 내부의 스위치와 커플러를 이용하여 배열안테나 RF단을 교정할 수 있는 방법이다. 또한 한 개의 송수신 RF단을 사용한 교정에 의한 오차를 줄이기 위해서 평균송수신 RF단 교정 방법을 제안하였다. 전산모의실험을 통해 DOA(Direction of Arrival)추정 빔형성 알고리즘이 송수신 RF단 교정에 의해 정확한 빔형성이 되는 것을 보였고 송신 전력 할 당시에도 제안된 교정에 의해 비트오류율이 낮아짐을 보였다.

• Asia pacific journal of information systems
• /
• 제10권4호
• /
• pp.1-20
• /
• 2000

Electronic Data Interchange(EDI) has the potential to improve business operations by expediting the exchange of business documents. It will also provide substantive operational and strategic benefits to the trading firms. However, the successful implementation of EDI systems requires the mutual trust and cooperation between the trading firms. The extent of EDI diffusion and performance depends on inter-organizational, intra-organizational, as well as innovation factors. Researches based on the sociopolitical process framework in the use of IT, organizational theory, resource dependence theory, and innovation diffusion theory have identified 3 inter-organizational variables(transaction climate, dependence, external IS expert support) and 4 intra-organizational variables(strategic IS planning, infrastructure, top management support, education/training,), and 3 innovation variables(compatibility, relative advantage, cost) that affect EDI diffusion. In this study, a multi-dimensional measure on EDI diffusion has been developed to capture the external and internal integration. Then, the influence of these 10 variables on the extent to which the EDI adopting firms pursue diffusion has been examined. Whether more diffusion leads to superior performance has also been studied. International trade managers from 107 firms in the trade industry participated in a field survey. The results based on a structural equation model(SEM), developed using AMOS, provide quite a strong support for the hypothesized relations. Both education/training and IT infrastructure influenced external and internal diffusion of EDI systems. Internal diffusion of EDI enables the adopting firms to improve operational and strategic performance, whereas external diffusion contributes only to operational performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.539-542
• /
• 1996

The forces exerted on an object by the end-effectors of multi-manipulators are decomposed into the motion-inducing force and the internal force. Motion-inducing force effects the motion of an object and internal force can't effect it. The motion of an object can't track exactly the desired motion because of internal force component, therefore internal force component must be considered. In this paper using the resolved acceleration control method and the fact that internal force lies in the null space of jacobian matrix, we construct independently the position, motion-inducing force and internal force controller. Secondly we construct the robust controller to preserve the robustness with respect to the uncertainty of manipulator parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.249-252
• /
• 1996

The inverted pendulum system is mechanical system which can handle the modern control theory and practical applications. In theoretical field, it is used as the experimental device identifying the effects of control method and in applicative field. There are difficulties in designing or linearizing the practical controller because it is so sensitive to the parameter variation and has the highly non-linear characteristic. In this paper, we suggested the systems which compensate the non-linearity throughout the internal control method and designed controller which is robust to the parameter variation using sliding mode.

• 대한치과보철학회지
• /
• 제44권2호
• /
• pp.197-206
• /
• 2006

Statement of problem: One of common problems associated with single teeth dental implant prosthetic is the loosening of screws that retain the implants. Purpose: The maintenance of screw joint stability is considered a function of the preload achieved in the screw when the suggested initial tightening torque is applied. The purpose of this study was to investigate acquired preload after initial clamping torque for estimating screw joint stability. Material and methods: A comparative study on the effect of initial clamping of two types of implant systems with different connections was conducted Three dimensional non-linear finite element analysis is adopted to compare the characteristics of screw preloads and stress distributions between two different types of implant systems composed with abutment, screw, and fixture under the same loading and boundary conditions. Results: 1. When the initial clamping torque of 32Ncm was applied to the implant systems, all types of implants generated the maximum effective stress at the first helix region of screw. 2. Morse taper connection types of implants generate lower stress distributions compared to those by butt joint connection types or implants due to large contact surface between abutment and fixture. 3. The internal types of implant systems with friction grip type implant systems have higher resistance to screw loosening than that of the external types of implant systems since the internal types of implant systems generated larger preload than that generated by the external types for the same tightening moments.