• 제목/요약/키워드: internal standard method

검색결과 689건 처리시간 0.041초

IN VIVO H-MRS QUANTIFICATION OF BRAIN METABOLITES USING WATER AS AN INTERNAL STANDARD

  • Lee, Jung-Woo;Choe, Bo-Young;Baik, Hyun-Man;Chung, Sung-Taek;Lee, Hyoung-Koo;Suh, Tae-Suk
    • 대한자기공명의과학회:학술대회논문집
    • /
    • 대한자기공명의과학회 2002년도 제7차 학술대회 초록집
    • /
    • pp.79-79
    • /
    • 2002
  • Purpose: The reliability of absolute quantification of average metabolite concentrations in the human brain in vivo by H-MRS using the fully relaxed water signal as an internal standard was evaluated in a number of in vitro as well as in vivo measurements. Method: The experiments were performed on 3T MEDINUS MAGNUM MR-scanner using a STEAM sequence.

  • PDF

GC-FID에 의한 Rat 뇨중 Tranylcypromine의 분석 (GC-FID Analysis of Tranylcypromine in Rat Urine)

  • 강건일;전순영
    • 약학회지
    • /
    • 제29권5호
    • /
    • pp.260-267
    • /
    • 1985
  • A gas chromatography with flame ionization detection was developed to measure tranylcypromine in rat urine. The method involves extraction of the drug and the internal standard, phenylpropylamine from the urine using ethyl acetate and back extraction into 0.5N $H_{2}SO_{4}$. Following final extraction using dichloromethane, both the drug and the internal standard were converted to trifluoroacetyl derivatives and analyzed using a column of 3% SE-30 on 80/100 mesh Chromosorb W(HP). A calibration curve was constructed in the range of $5~50{\mu}g$tranylcypromine sulfate in 0.5ml urine and found to be linear. The detection limit was $2{\mu}g$. The tranylcypromine could be analyzed with the percent recovery of $100.81{\pm}8.13$ (SD) ina concentration range of $8-40{\mu}g$ in 0.5ml urine. When 0.4mmol/kg dose of the drug was administered through, an oral route, excretion percent of tranylcypromine in rat urine over 36hr was found to be $11.90{\pm}6.04$ (SD) for tranyleypromine sulfate and $2.23{\pm}0.63$ (SD) for benzyl trans-2-phenylcyclopropanecarbamate.

  • PDF

2가지 내부표준물질을 이용하여 어류시료 중 Octylphenol, Nonylphenol, Bis(2-ethylhexyl)phehalate의 동시정량 (Simultaneous Determination of Octylphenol, Nonylphenol and Bis(2-ethylhexyl)phthalate in Fish Samples Using Two Internal Standards)

  • 김종훈
    • 분석과학
    • /
    • 제14권3호
    • /
    • pp.244-252
    • /
    • 2001
  • 어류근육속에 포함된 nonylphenol(NP), octylphenol(OP), bis(2-ethylhexyl)phtalate(BEHP)의 동시 정량방법을 1-phenyldecanol(PD)과 bis(2-ethylbutyl)phthalate(BEBP) 2가지 내부표준물질을 이용하여 연구하였다. 1-phenyldecanol은 nonyphenol과 octylphenol을 정량하고, bis(2-ethylbutyl)phthalate는 bis(2-ethylhexyl)phthalate를 정량하기 위해 사용하였다. NP와 OP의 경우 $0.2{\sim}20{\mu}g/g$ 농도범위에서 75% 이상의 회수율을 나타냈으며, BEHP는 $0.4{\sim}40{\mu}g/g$ 농도범위에서 102% 이상의 회수율을 보였다. 시료를 밀폐된 배양시험관에서 이염화메탄을 이용하여 추출하고 용매를 이소-헥산으로 바꾸고 aminopropyl 칼럼(2g)을 이용하여 분리한후 GC/MS-SIM 방법으로 분석하였다. 확립된 분석방법을 11점의 한국시료와 3점의 영국시료에 적용하였다. Nonylphenol은 2점의 한국어류시료에서, BEHP는 9점의 한국어류시료에서 검출되었고, 그 농도범위는 각각 $0.02{\sim}0.06{\mu}g/g$$0.18{\sim}2.03{\mu}g/g$이었다. 그러나 영국어류시료에서는 단 1점의 시료에서 BEHP가 검출되었고 그 농도는 $2.99{\mu}g/g$이었다. 이 방법에 의해서 octylphenol은 어떠한 시료에서도 검출되지 않았으며, 이와 같이 2가지 내부표준물질을 이용하는 방법은 각기 다른 특성을 갖는 분석대상물질에 각각의 특성과 유사한 내부표준물질의 사용으로 매우 적은량의 생체 시료에서 보다 정확한 정량이 가능하였다.

  • PDF

Tuberculin PPD RT23 2 TU를 이용한 투베르쿨린 피부반응 검사의 의의 (Usefulness of Tuberculin Skin Test by Tuberculin PPD RT23 2 TU)

  • 양종욱;전만조;김성중;이향림;이승준;이명구;김동규;박명재;강민종;현인규;정기석
    • Tuberculosis and Respiratory Diseases
    • /
    • 제53권4호
    • /
    • pp.401-408
    • /
    • 2002
  • 목 적 : 투베르쿨린 피부반응 검사는 결핵균 감염을 조사하는 방법으로, 전 세계적으로 널리 사용되고 있다. 그러나 여러 가지 요소에 의해 검사 결과의 판독에 어려움이 따른다. 2000년 미국흉부학회에서는 피검사자의 위험요소를 고려하여 피부반응 검사의 결과를 판단하도록 권장하였다. 우리나라의 경우 높은 결핵 감염율과 BCG 백신 접종률로 인해 피부반응 검사를 통해 현감염, 과거감염, 그리고 비감염을 구별하기 어렵다. 본 연구는 항결핵 약제의 투여를 결정하는데 피부반응 검사가 얼마나 도움이 되는지 알아보기 위해, 피부반응 검사의 음성 예측도를 조사하였다. 방 법 : 2001년 3월 1일부터 7월 31일까지 한림대학교 부속 춘천성심병원의 호흡기 내과에 입원한 환자를 대상으로, 현재 국내에서 사용되고 있는 Tuber culin PPD RT23 2 TU (0.1 ml)를 Mantoux 검사에 따라 시행하였다. 결핵의 진단기준은 1) 세균학적 진단기준으로 객담에서 결핵균이 배양되거나 현미경 검사로 항산균을 증명한 경우 2) 임상적 진단기준으로는 상기 세균학적 검사에서 결핵균을 증명하지 못하였으나, 방사선학적 또는 조직학적으로 결핵에 합당한 소견이나 증상이 있어서 진료의사가 결핵치료를 시행하기로 결정한 경우로 하였다. 결 과 : 등록된 환자 230명중에서 재입원 및 다른 과에 입원 중 전과되거나 중환자실에 입원한 환자 20명 (8.7%)을 제외한 총 210명의 환자를 대상으로 평가하였다. 환자의 평균연령은 $60{\pm}16.8$세였고, 남녀비는 1.28 : 1 (남118명, 여 92병)이였다. 결핵으로 진단된 환자는 53명 (25.2%)이였다. 폐결행이 45명(84.9%)이었고, 세균학적 검사에서 항산균 도말 양성이 22명(배양 양성 13, 배양 음성 9) 이었고, 임상적 진단기준으로 판단한 경우가 23명이었다. 결핵성 늑막염이 8명(15.1%)이었고, 조직학적으포 진단 된 경우가 4명, 임상적으로 판단되어 치료한 경우가 4명이었다. 미국흉부학회의 피부반응 검사의 판단기준에 따라 각각의 환자를 음성 및 양성으로 판정하였을 때, 음성 예측도는 92.3%, 양성 예측도는 47.3%, 민감도와 특이도는 각각 83%, 68.8%이었다. 결 론 : 입원한 호흡기 내과 환자를 대상으로 시행한 투베르쿨린 피부반응 검사는 92.3%의 높은 음성 예측도를 보였으며, 피부반응 검사가 음성으로 판단된 환자에서 항결핵 약제의 투여 여부를 결정하는데 중요한 단서를 제공할 것으로 생각된다.

금속 밀링과 직접 금속 레이저 소결 방식으로 제작한 3본 코발트-크롬 구조물의 변연 및 내부 적합도 비교 평가 (Comparative evaluation of marginal and internal fit of three-unit Co-Cr frameworks fabricated by metal milling and direct metal laser sintering methods)

  • 안재석;이정환
    • 대한치과기공학회지
    • /
    • 제42권2호
    • /
    • pp.81-89
    • /
    • 2020
  • Purpose: This in vitro study was conducted to evaluate the marginal and internal fit of three-unit Co-Cr frameworks fabricated by computer-aided metal milling and direct metal laser sintering(DMLS) systems in comparison to conventional casting method. Methods: Three-unit Co-Cr frameworks were fabricated by conventional wax up with casting(CWC), computer-aided metal milling(MM) and direct metal laser sintering(DMLS)(n=10 each). The marginal and internal fit of specimens were examined using a light-body silicone impression material. The thickness of light-body silicone was measured at eight reference points each, divided in the mesio distal and bucco lingual directions. All measurements were conducted by a stereomicroscope. Digital photos were taken at 150× magnification and then analyzed using a measurement software. The Kruskal-Wallis test and Bonferroni correction were used for analyzing the results. Results: The mean(SD) is ㎛ for fabrication methods, the mean marginal fit were recorded respectively, DMLS 39(27), followed by CWC 63(38), MM 220(128). and the mean internal fit CWC 95(47), DMLS 116(49), MM 210(152). In addition, the largest gap was found in the occlusal surface area among the internal measurement areas of all groups. Conclusion: As a result, the direct metal laser sintering method showed better marginal and internal fit than the metal milling method. The marginal and internal fit were statistically different according to the three fabrication methods(p<0.001). Except the MM group, the marginal fit of the CWC and DMLS groups was below the clinical standard of 120 ㎛. Based on the results of this study, it can be applied to clinical use in the future.

방사선폐렴 변증(辨證)도구 개발을 위한 기초연구 (Preliminary Study for Development of Pattern Identification Tool for Radiation Pneumonitis)

  • 김재효;방연희;도하윤;안준모;김관일;이범준;정승기;정희재
    • 대한한방내과학회지
    • /
    • 제38권1호
    • /
    • pp.32-47
    • /
    • 2017
  • Objective: The purpose of this study was to develop a standard tool for pattern identification of radiation pneumonitis. Methods: Textbooks, published studies, and references with comments about patterns were reviewed. Through the Delphi method, we determined pattern identifications based on advice from a committee of experts composed of 13 Korean respiratory internal medicine professors. Results: Using the Delphi method, four pattern identifications were chosen: Qi Deficiency (氣虛), Yin Deficiency (陰虛), Heat Toxin (熱毒), and Phlegm Dampness (痰濕). The tool was developed in a question-and-answer format with 35 questions. Conclusions: A pattern identification tool that can discriminate the patterns of radiation pneumonitis for standardized diagnosis was developed through expert consultation. Further study of its validity and reliability is necessary.

디이젤 엔진의 크랭크축 최적설계에 관한 연구 (A Study on Optimization of Crankshaft in Diesel Engine)

  • 조상범;안상호;유형선
    • 한국자동차공학회논문집
    • /
    • 제3권5호
    • /
    • pp.10-16
    • /
    • 1995
  • In this study, the optimum design is carried out upon the crankshaft of in-line 6-cylinder internal combustion diesel engine with the mechanical analysis for the layout design, which is standard calculation whose process contains quadratic curve fitting method and quasi newton method about cost function, design variables and constraint conditions, Without finite element analysis, this process in wich mechanical analysis is performed upon the most critical part in crankshaft gives necessary and satisfied output in layout design and saves time and cost in developing a new diesel engine. In this study, also, the 3-dimensional finite element method is used in confirming the standard calculation for the optimization of crankshaft and the shape optimization in crankweb is obtained.

  • PDF

Analytical method to estimate cross-section stress profiles for reactor vessel nozzle corners under internal pressure

  • Oh, Changsik;Lee, Sangmin;Jhung, Myung Jo
    • Nuclear Engineering and Technology
    • /
    • 제54권1호
    • /
    • pp.401-413
    • /
    • 2022
  • This paper provides a simple method by which to estimate the cross-section stress profiles for nozzles designed according to ASME Code Section III. Further, this method validates the effectiveness of earlier work performed by the authors on standard nozzles. The method requires only the geometric information of the pressure vessel and the attached nozzle. A PWR direct vessel injection nozzle, a PWR outlet nozzle, a PWR inlet nozzle and a BWR recirculation outlet nozzle are selected based on their corresponding specific designs, e.g., a varying nozzle radius, a varying nozzle thickness and an outlet nozzle boss. A cross-section stress profile comparison shows that the estimates are in good agreement with the finite element analysis results. Differences in stress intensity factors calculated in accordance with ASME BPVC Section XI Appendix G are discussed. In addition, a change in the dimensions of an alternate nozzle design relative to the standard values is discussed, focusing on the stress concentration factors of the nozzle inside corner.

섬유근통(fibromyalgia)의 병태와 진단을 위한 임상 1례 보고 (A Case Report of Symptomatic Character and Diagnosis of Fibromyalgia)

  • 정태영;조정효;박봉기;손창규
    • 대한한의학회지
    • /
    • 제30권4호
    • /
    • pp.162-168
    • /
    • 2009
  • Objective: This report aimed to study fibromyalgia's diagnostic criteria, differential diagnoses and its pathology from the viewpoint of oriental medicine. Method: We observed and diagnosed a female patient who complained of prolonged whole body pain, even several times hospitalized for treatment. Result: The patient's symptoms correspond with fibromyalgia and we ruled out other suspected diseases. Conclusion: Fibromyalgia is prone to be misdiagnosed because the patient has complicated symptoms such as various pains and chronic fatigue as well as depression unexplained by medical tests. Furthermore, the symptoms often never disappear completely, although it isn't progressive or life-threatening, and can be improved. So accumulation of data and analysis from the viewpoint of oriental medicine is necessary for development of oriental medical standard treatment.

  • PDF

Allogeneic clonal mesenchymal stem cell therapy for refractory graft-versus-host disease to standard treatment: a phase I study

  • Yi, Hyeon Gyu;Yahng, Seung-Ah;Kim, Inho;Lee, Je-Hwan;Min, Chang-Ki;Kim, Jun Hyung;Kim, Chul Soo;Song, Sun U.
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제20권1호
    • /
    • pp.63-67
    • /
    • 2016
  • Severe graft-versus-host disease (GVHD) is an often lethal complication of allogeneic hematopoietic stem cell transplantation (HSCT). The safety of clinical-grade mesenchymal stem cells (MSCs) has been validated, but mixed results have been obtained due to heterogeneity of the MSCs. In this phase I study, the safety of bone marrow-derived homogeneous clonal MSCs (cMSCs) isolated by a new subfractionation culturing method was evaluated. cMSCs were produced in a GMP facility and intravenously administered to patients who had refractory GVHD to standard treatment resulting after allogeneic HSCT for hematologic malignancies. After administration of a single dose ($1{\times}10^6cells/kg$), 11 patients were evaluated for cMSC treatment safety and efficacy. During the trial, nine patients had 85 total adverse events and the rate of serious adverse events was 27.3% (3/11 patients). The only one adverse drug reaction related to cMSC administration was grade 2 myalgia in one patient. Treatment response was observed in four patients: one with acute GVHD (partial response) and three with chronic GVHD. The other chronic patients maintained stable disease during the observation period. This study demonstrates single cMSC infusion to have an acceptable safety profile and promising efficacy, suggesting that we can proceed with the next stage of the clinical trial.