• Tuberculosis and Respiratory Diseases
• /
• 제70권1호
• /
• pp.21-27
• /
• 2011

Background: Although the gold standard method for research trials on epidermal growth factor receptor (EGFR) mutations has been direct sequencing, this approach has the limitations of low sensitivity and of being time-consuming. Peptide nucleic acid (PNA)-mediated polymerase chain reaction (PCR) clamping is known to be a more sensitive detection tool. The aim of this study was to compare the detection rate of $EGFR$ mutation and EGFR-tyrosine kinase inhibitor (TKI) responsiveness according to $EGFR$ mutation status using both methodologies. Methods: Clinical specimens from 112 NSCLC patients were analyzed for $EGFR$ mutations in exons 18, 19, 20, and 21. All clinical data and tumor specimens were obtained from 3 university hospitals in Korea. After genomic DNA was extracted from paraffin-embedded tissue specimens, both PNA-mediated PCR clamping and direct-sequencing were performed. The results and clinical response to $EGFR$-TKIs were compared. Results: Sequencing revealed a total of 35 (22.9%) mutations: 8 missense mutations in exon 21 and 26 deletion mutations in exon 19. PNA-mediated PCR clamping showed the presence of genomic alterations in 45 (28.3%) samples, including the 32 identified by sequencing plus 13 additional samples (6 in exon 19 and 7 in exon 21). Conclusion: PNA-mediated PCR clamping is simple and rapid, as well as a more sensitive method for screening of genomic alterations in $EGFR$ gene compared to direct sequencing. This data suggests that PNA-mediated PCR clamping should be implemented as a useful screening tool for detection of $EGFR$ mutations in clinical setting.

• 상하수도학회지
• /
• 제31권1호
• /
• pp.103-114
• /
• 2017

A membrane bioreactor by sequentially alternating the inflow and by applying a two-stage coagulation control based on pre-coagulation was evaluated in terms of phosphorus removal efficiency and cost-savings. The MBR consisted of two identical alternative reaction tanks, followed by aerobic, anoxic and membrane tanks, where the wastewater and the internal return sludge alternatively flowed into each alternative reaction tank at every 2 hours. In the batch-operated alternative reaction tank, the initial concentration of nitrate rapidly decreased from 2.3 to 0.4 mg/L for only 20 minutes after stopping the inflow, followed by substantial release of phosphorus up to 4 mg/L under anaerobic condition. Jar test showed that the minimum alum doses to reduce the initial $PO_4$-P below 0.2 mg/L were 2 and 9 mol-Al/mol-P in the wastewater and the activated sludge from the membrane tank, respectively. It implies that a pre-coagulation in influent is more cost-efficient for phosphorus removal than the coagulation in the bioreactor. On the result of NUR test, there were little difference in terms of denitrification rate and contents of readily biodegradable COD between raw wastewater and pre-coagulated wastewater. When adding alum into the aerobic tank, alum doses above 26 mg/L as $Al_2O_3$ caused inhibitory effects on ammonia oxidation. Using the two-stage coagulation control based on pre-coagulation, the P concentration in the MBR effluent was kept below 0.2 mg/L with the alum of 2.7 mg/L as $Al_2O_3$, which was much lower than 5.1~7.4 mg/L as $Al_2O_3$ required for typical wastewater treatment plants. During the long-term operation of MBR, there was no change of the TMP increase rate before and after alum addition.

• 청정기술
• /
• 제25권1호
• /
• pp.63-73
• /
• 2019

연소공정 내에서 질소산화물 배출을 저감하는 선택적 무촉매 환원장치 내부의 화학반응 및 저감효율에 대한 수치해석이 실행되었다. 선택적 무촉매 환원장치에서 저감된 질소산화물은 질소뿐만 아니라 아산화질소로도 전환된다. 아산화질소는 온실가스로써 지구온난화에 영향을 끼치기 때문에 선택적 무촉매 환원장치 내의 질소산화물 제어와 동시에 아산화질소 생성제어가 요구되어진다. 본 연구에서는 선행연구에서 실행된 실험과 온도조건과 가성소다의 첨가량이 동일한 선택적 무촉매 환원장치 내의 전산해석을 실시하고 비교하여 전산해석의 신뢰성을 확인하고, 가성소다 첨가량을 추가적으로 조절하여 질소산화물의 저감 효율과 아산화질소 생성량을 예측하였다. 전산해석은 후단의 측정점을 설정하여 각 물질의 질량분율을 확인하였다. 세부적으로는 측정점에서 유동방향에 수직한 면을 설정하여 온도 조건과 가성소다 첨가량에 따른 각 물질의 평균 질량분율을 비교하였다. 실험값과 전산해석에 의한 모사값은 최대 18.9%의 오차를 보이며 대체적으로 잘 예측됨을 확인하였으며 가성소다 첨가량을 증가시켰을 땐 70% 이상의 제거율의 온도 범위가 넓어지는 것을 확인하였다. 따라서 반응온도의 낙차가 크고 잦은 폐기물 소각시설 등에서 효과적일 것으로 예상된다.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.49-62
• /
• 2016

In this study, a solid oxide fuel cell (SOFC) system model including balance of plant (BOP) for building electric power generation is developed to study the effect of operating conditions on the system efficiency and power output. SOFC system modeled in this study consists of three heat-exchangers, an external reformer, burner, and two blowers. A detailed computational cell model including internal reforming reaction is developed for a planer SOFC stack which is operated at intermediate temperature (IT). The BOP models including an external reformer, heat-exchangers, a burner, blowers, pipes are developed to predict the gas temperature, pressure drops and flow rate at every component in the system. The SOFC stack model and BOP models are integrate to estimate the effect of operating parameters on the performance of the system. In this study, the design of experiment (DOE) is used to compare the effects of fuel flow rate, air flow rate, air temperature, current density, and recycle ratio of anode off gas on the system efficiency and power output.

• 대한기계학회논문집B
• /
• 제40권12호
• /
• pp.793-799
• /
• 2016

폐열을 열원으로 사용하는 저온형 개질기는 하이브리드 연료전지 시스템의 효율향상을 위해 사용되고 있다. 저온형 개질기의 경우 저온의 열적상태에서 높은 열전달 효율을 내는 것이 중요하며, 이를 위한 형상 최적화의 과정이 필요하다. 본 연구에서는 제한된 열공급 상황에서 개질기의 형상인자 변화에 따른 온도 및 반응특성을 전산해석을 통하여 알아보고자 하였다. 해석결과 저온형 개질기의 반응이 활발히 일어나는 영역은 온도가 높은 후단에 제한되는 현상을 보여 고온형 개질기와의 차이를 나타내었다. 또한 개질기의 기체공간속도(Gas hourly space velocity, GHSV)를 감소시키거나 열전달 면적을 증대시킴으로써 효율을 향상 시킬 수 있음을 확인하였고 종횡비에 따른 해석을 실시한 결과 저온형 개질기의 경우 길이방향보다는 반경방향의 열전달을 증대시키는 방법이 효과적임을 확인하였다.

• 분석과학
• /
• 제15권5호
• /
• pp.410-416
• /
• 2002

본 연구에서는 LC - MS/MS를 이용해 혈장과 뇨중에서 반코마이신을 신속하게 정량분석하는 방법을 개발하였다. 크로마토그래피는 $C_{18}$ XTerra MS 컬럼 ($2.1{\times}30mm$, $3.5{\mu}m$)을 사용하여 분석하였다. 이동상으로는 0.25% 초산이 섞인 10% 아세토니트릴 용액을 사용하였으며, 유속은 $250{\mu}L/min$이다. 반코마이신과 카페인 (내부표준물질)은 multiple reaction monitoring (MRM) 방법을 사용하여 검출하였으며 반코마이신은 precursor ion m/z 725.0 ( $[M+2H]^{2+}$)와 product ion m/z 100.0을 사용하였다. 혈장에서 반코마이신의 검출한계는 1 nM이며 좋은 정확성과 정밀성을 보여주었다. 또한 혈장중에서 반코마이신의 정량범위는 $0.01{\mu}M$ - $100{\mu}M$이다. 혈장과 뇨중에서 반코마이신을 정량하는 이 분석방법은 약물동력학연구 및 관련연구에 성공적으로 적용되었다.

• 한국결정학회지
• /
• 제6권2호
• /
• pp.111-117
• /
• 1995

화학증착법에 의해 TiO2 박막을 Si-wafer(100)위에 제조하였다. Titanium tetraisopropoxide (TTIP)를 출발물질로 하여 200-500℃의 온도범위에서 증착을 행하였다. 증착된 박막의 두께는 Ellipsometry 및 SEM을 사용하여 측정하였으며, 산소의 함량에 따른 증착층의 성분분석은 ESCA를 사용하였다. TiO2 박막의 증착속도는 산소의 함량에 따라 증가하였고, 반응가스인 산소를 공급하지 않았을 때 증착층내에 불순물로 탄소가 존재하였으며, 증착층의 성분은 내부로 갈수록 TiO2에서 Ti로 변하였다. 산소를 600scm 공급하였을 때 증착층내에 소량의 탄소가 존재하였으며, 증착층의 성분은 내부로 갈수록 TiO2에서 TiO, Ti로 됨을 알 수 있었다. 산소를 1200scm공급하였을 때 증착층내에 탄소가 존재하지 않았으며, 증착층 성분은 표면에는 TiO2를 이루나 증착층 내부로 갈수록 Ti복합화합물을 이루고 있었다.

• 센서학회지
• /
• 제31권2호
• /
• pp.102-106
• /
• 2022

Currently, the demand for real-time monitoring of water quality has increased dramatically. Total organic carbon (TOC) analysis is a suitable method for real-time analysis compared with conventional biochemical oxygen demand (BOD) and chemical oxygen demand (COD) methods in terms of analysis time. However, this method is expensive because of the complicated internal processes involved. The photocatalytic titanium dioxide (TiO2)-based TOC method is simpler as it omits more than three preprocessing steps. This is because it reacts only with organic carbon (OC) without extra processes. We optimized the rate between the TiO2 photocatalyst and binder solution and the TiO2 concentration. The efficiency was investigated under 365 nm UV exposure onto a TiO2 coated substrate. The optimized conditions were sufficient to apply a real-time monitoring system for water quality with a short reaction time (within 10 min). We expect that it can be applied in a wide range of water quality monitoring industries.

• 한국의류산업학회지
• /
• 제16권1호
• /
• pp.111-117
• /
• 2014

This study investigated the perception of upcycling for sensitive university students in regards to fashion trends. It was conducted through questionnaires delivered to male and female college students who majored in clothing related subjects from June 2012 to June 2013 in Gwangju. The contents for this research are general details, seriousness of environmental resources, awareness of upcycle, and purchasing intention for upcycling products. Most of the respondents said that recycling of resources is absolutely necessary due to the impact of environmental pollution and the consumption of resources. On the contrary, the experience of the respondents which purchased recycling products was low. The awareness of also was low, upcycling, internal upcycling brands and internal consumption groups, however, the decisions for subsequent purchases were positive. The reasons for the unsatisfactory of upcycling of products were due to quality and price. The reaction for many upcycle goods had the best question response rate in daily supplies part; subsequently, this study suggested 3 items, apparel products, fashion accessories, and daily supplies. In addition, a group which contains people who expend more for clothing had a lower awareness of upcycle and purchasing intention than other groups that contained some people who expend less. The results of the study can be used in data that recognize the necessary of upcycle education for university students, and develop educational programs. It can also encourage the purchase of upcycle products that reduce the consumption of resources.

• 대한환경공학회지
• /
• 제37권11호
• /
• pp.642-648
• /
• 2015

수계에 존재하는 인산염의 흡착제거 용량을 향상시키기 위하여, 참나무 기반 활성탄을 제조하였으며, 이때 $Fe^{3+}$와 $Al^{3+}$이온의 혼합물을 흡착제 표면에 담지 하였다. 금속담지 활성탄의 인산염의 흡착용량은 금속이온으로 표면을 개질 하지 않은 활성탄에 비해 약 8배 높게 나타났다. 흡착평형량은 흡착반응의 온도가 증가할수록 증가하였으며, Langmuir 흡착등온식의 경향과 일치하였다. 제조된 금속담지 활성탄의 인산염 흡착제거공정은 흡열의 자발반응으로 진행되었음을 확인하였다. 흡착공정의 거동과 제거속도를 평가하기 위하여, 세공확산모델을 통해 내부 확산계수를 산출하였으며, 이는 실험결과와 매우 일치하였다.