• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.696-701
• /
• 2001

The performance and the internal flow of the impeller of the centrifugal chiller compressor with refrigerant R12 as working fluid were studied numerically, using CFD code, CFX-Tascflow, which is commercially available. In this numerical study, the thermodynamic and transport properties of the refrigerant gas were generated by the property program of NIST and linked with main program to extend the capability of the code to refrigerant gases. Numerical study was applied to several mass flow rates near the design mass flow rate at constant rotating speed. Overall performance and flow characteristics of the impeller at impeller exit were investigated. The results were physically reasonable and showed good agreement with experimental measurement at the design flow rate.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1069-1072
• /
• 1998

Recently the development of design and automation technology and manufacturing method, has reduced the cost of chip, but it becomes more difficult to test IC chip because test technique doesn't keep up with these techniques. In case of IC testing, obtaining test vectors to be able to detect good chip or bad one is very important, but according to increasing complexity, it is very complex and difficult. Another problem is that during testing, there could be capability of physical and electrical damage on chip. Also there is difficulty in synchronization between CUT (circuit under test) and Test equipment〔1〕. Because of these difficulties, built in self test has been proposed. Not only obtaining test vectors but also reducing test time becomes hot issues nowadays. This paper presents a new test BIST(built in self test) method. Proposed BIST implementation reduces test time and obtains high fault coverage. By searching internal nodes in which are inserted test_point_cells〔2〕and allocating TPG(test pattern generation) stages, test length becomes much shorter.

• Culinary science and hospitality research
• /
• v.12 no.1 s.28
• /
• pp.203-215
• /
• 2006

This study tried to develop an estimation model on the competitive power as a method to understand a practical index on the competitive power in order to improve the competitiveness of domestic bakery corporations and look into their internal structure. The results of the practical analysis are summarized below. First, eight critical success factors, which are considered important in competitive power in bakery corporations, were derived from preceding studies and an expert meeting. Second, this study performed a questionnaire with eight derived factors for bakery managers and employees. Seven critical success factors suitable for bakery corporations were chosen through validity and reliability tests. Third, this study performed an AHP(Analytic Hierarchy Process) analysis in order to establish preference according to each factor and weight. The importance of factor concerned with the competitive power of bakery corporations according to the result of weight analysis appeared in order of customer resources, personnel resources, corporate images, material resources and qualities, technical capability, financial factors and pliability(time).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.181-187
• /
• 2013

Performance of DI diesel engine with high fuel injection method is directly related to its emission characteristics and fuel consumption. In this study, numerical model of 3rd generation piezo-driven injector was designed to analyze the hydraulic performance. Also the injection response characteristics was investigated by using the AMESim simulation code. From this study, it was shown that 3rd generation piezo-driven injector had a faster response and had better control capability due to its hydraulic bypass-circuit that has potential to higher hydraulic characteristics and improved accuracy of injected fuel quantity.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.4
• /
• pp.73-78
• /
• 2004

The conventional SLT(Shear Lag Theory) which has been proven that it can not provide sufficiently accurate strengthening predictions in elastic regime when the fiber aspect ratio is small. This paper is an extented work to improve it by modifying the load transfer mechanism called NSLT(New Shear Lag Theory), which takes into account the stress transfer across the fiber ends and the SCF(Stress Concentration Factor) that exists in the matrix regions near the fiber ends. The key point of the model development is to determine the major controlling factor among the material and geometrical coefficients. It is found that the most affecting factor is the fiber/matrix elastic modulus ratio. It is also found that the proposed model gives a good result that has the capability to correctly predict the elastic properties such as interfacial shear stresses and local stress variations in the small fiber aspect ratio regime.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1180-1186
• /
• 2011

For verifying consistency and completeness of some UML diagrams as a representative of a graphical notations for object-oriented designs, I first give an analysis of some UML diagrams and apply some verifying rules to the UML diagrams. In this paper, I design effective verifying system which possesses both diagramming facility and the consistency and completeness checking capability. The verifying system uses a set of frames to represent internal diagramming information.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.228-232
• /
• 2008

In recent years, wireless ad hoc networks have become increasingly popular in both military and civilian applications due to their capability of building networks without the need for a pre-existing infrastructure. Recently, IEEE 802.11 Task Group e has been working on a new mechanism, the Enhanced Distributed Coordination Function (EDCF), to enhance the performance of 802.11 DCF. However, EDCF only reduces the internal collisions within a station, and external collisions between stations remain high in ad-hoc networks. In this paper, we propose to adopt an adaptive backoff window control technique, based on a dynamic value of the initial value of the range in which the backoff is chosen, so the backoff timer is randomly chosen in the range (InitRng, CW-1). We use ns-2 simulation to evaluate the throughput of our scheme. Results show that the throughput is improved for our scheme compared to the original DCF due to the reduced the number of collisions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.1
• /
• pp.84-92
• /
• 2001

In this papers, we proposed the new method in order to diagnosis aging state of transformers. For wavelet transform, Daubechies filter is used, we can obtain wavelet coefficients which is used to extract feature of statistical parameters (maximum value, average value, dispersion skewness, kurtosis) about each acoustic emission signal. Also, these coefficients are used to identify normal and fault signal of internal partial discharge in transformer. As improved method for classification use neural network. Extracted statistical parameters are input into an back-propagation neural network. The number of neurons of hidden layer are obtained through Result of Cross-Validation. The network, after training, can decide whether the test signal is early aging state, alst aging state or normal state. In quantity analysis, capability of proposed method is superior to compared that of classical method.

• Journal of Korean Library and Information Science Society
• /
• v.22
• /
• pp.245-276
• /
• 1995

This study analyzed the process of information service and its factors in the cognitive viewpoint. And developed a conceptual model to help in developing future information systems and services. The results of this study were summarized as follows : 1) The paradigm of information user study is changing from the system-centered to the user-centered one. 2) The researchers describe the user's internal cognitive process as the starting point of the information service. 3) The user's personal cognitive process influence the process of the information service over. And the focus is a microscopic one including the factors of the perception and recognition of the stimulus, remembering and searching information, reasoning the rules, recognition of the patterns, formalization of the concepts, etc. 4) The information librarian performs the role as a knowledge/ information system interface, and his knowledge structure reflects the organization of that knowledge/information system. 5) The information librarians can perform their role as information specialists actively and offensively. And the performance of the librarians can be measured on the scales of the su n.0, pplying capability of relevant information and the client satisfaction.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1836-1839
• /
• 2005

We have developed Ethernet based real-time communication systems called "Vnet/IP" for DCS which is the control system for process automation. This paper describes the features and the technologies of the ASIC which is utilized in the communication interface hardware for Vnet/IP. Vnet/IP has been developed for mission-critical communications. Hence it has real-time feature, high reliability and precise time synchronization capability. At the same time, it is able to deal with standard protocols without influence on mission-critical communications. The communication interface hardware has a host interface and dual redundant network interfaces. The host interface can be chosen PCI-bus or R-bus which is the proprietary internal bus developed for the high reliable redundant controller. Each network interface is a RJ45 connection with 1Gbps maximum in compliance with IEEE802.3.