• Korean Journal of Agricultural Science
• /
• v.38 no.1
• /
• pp.1-6
• /
• 2011

Daeduckchal 1 waxy corn hybrid including check was planted and compared with domestic leading vatiety on agronomic characteristics, traits related to table gualities and crude income. Stem and ear height of Daeduckchal 1 among used hybrids were intermediate and stem diameter was also similar to other hybrids. Days to tasseling of this hybrid needed 56 days which was slightly shorter than check hybrid, Yeonnong. Ear length of CNU-H2 was longer than Yeonnongchal as 21.7 cm, while Chalok 2 was 14.1 cm. Number of tillers per plant of this hybrid were higher than Chalok 2 but lower than Yeonnong. Pericarp thickness of CNU-H2 and CNU-H3 were similar to Yeonnon. In sugar content, Daeduckchal 1 was intermediate level as 11.7 brix(%). Marketability of Daeduckchal 1 was the highest among used hybrids and crude incomes was also high.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.357-360
• /
• 1997

Currently, there is a need for the development of an advanced new technology for Low-and Intermediate-Level Radioactive Waste (LILW) treatment from nuclear power plants. The vitrification and melting technology by the use of the electrical equipments such as induction heater and plasma torch based furnace, along with off-gas treatment are considered as the most promising one of the LILW treatment technology since they can produce a very stable waste forms as well as considerably large volume reduction, which is a world-wide trend to apply for radioactive waste treatment. Korea Electric Power Research Institute(KEPRI) has already completed a feasibility study on LILW treatment and conceptual system design of a demonstration plant to be constructed. For this research, KEPRI selected a cold crucible melter(CCM) for the vitrification of combustible waste, and plasma torch based furnace(PT) for the melting of noncombustible waste, along with off-gas treatment for the volatile radioisotopes such as cesium.

• Journal of Nuclear Fuel Cycle and Waste Technology
• /
• v.1 no.1
• /
• pp.1-7
• /
• 2013

The safe management of radioactive waste is a national task required for sustainable generation of nuclear power and for energy self-reliance in Korea. Since the initial introduction of nuclear power to Korea in 1978, rapid growth in nuclear power has been achieved. This large nuclear power generation program has produced a significant amount of radioactive waste, both low- and intermediate-level waste (LILW) and spent nuclear fuel (SNF); and the amount of waste is steadily growing. For the management of LILW, the Wolsong LILW Disposal Center, which has a final waste disposal capacity of 800,000 drums, is under construction, and is expected to be completed by June 2014. Korean policy about how to manage the SNF has not yet been decided. In 2004, the Atomic Energy Commission decided that a national policy for SNF management should be established considering both technological development and public consensus. Currently, SNF is being stored at reactor sites under the responsibility of plant operator. The at-reactor SNF storage capacity will run out starting in 2024. In this paper, the fundamental principles and steps for implementation of a Korean policy for national radioactive waste management are introduced. Korean practices and prospects regarding radioactive waste management are also summarized, with a focus on strategy for policy-making on SNF management.

• The Korean Journal of Ecology
• /
• v.28 no.2
• /
• pp.85-92
• /
• 2005

This study emphasizes syntaxonomy and syndynamics of intermediate (Zwischen) moor (area: 14,000 $m^2$) at Mt. Shinbul in Yangsan, southeastern Korean Peninsula. A total of 105 vascular plant species including 26 monitor-species were recorded. Analysis by the $Z\"{u}rich$-Montpellier School's method distinguished eight vegetation units: Eleocharitis-Blyxetum echinospermae ass. nov., Eriocaulon sikokianum-Utricularia racemosa community, Eleocharis wichurai-Molinia japonica community, Platanthero-Molinietum japonicas, Miscanthus sinensis for. purpurascens community, Tripterygium regelii community, Symplocos chinensis-Quercus mongolica community, Symplocos chinensis-Quercus dentata community. PCoA (Principal Coordinates Analysis) shows that vegetation changes and distributional aspects are associated with both moisture condition and sunlight on the ground layer and soil nutrient level (mesotrophic to oligotrophic). Most important to Molinietea japonicas being representative intermediate moor vegetation at the southeasternmost fringe of the Korean Peninsula is the local cooling effect by mountainous cloud and mist zone resulting in shorter and wetter growing season. The Yangsan moor vegetation was compared with earlier descriptions of related Mujechi moor from anthropogenic and natural moor vegetations.

• New & Renewable Energy
• /
• v.7 no.3
• /
• pp.83-91
• /
• 2011

The purpose of this study is to select appropriate location factors for wind power plant, provide detailed classification criteria, and find out appropriate sites for installing wind power plant in Gangwondo. In this study, the following 11 factors were extracted for site selection of wind power plant : wind resource, topography (valley angle, distance to the ridge), forest density, land use, preservation area, national park, Baekdu-Daegan, noise, shade, Transmission Line, and approaching roads. Each factor had relatively different level of importance so that AHP (Analytic Hierarchy Process) technique was used to calculated the weighted value per factor. For overlay analysis, classification criteria were prepared for each factor and each factor was classified into 3 grades : very appropriate, intermediate, poor. According to overlay analysis, the areas which received the highest grade (grade 5) was only in 0.16% of the total area of Gangwondo and had a tendency to exist along the mountain ridge over 600-meter elevation. Through analyzing the yearly average of wind power density, it was proved that the wind power density of areas with grade 4 or 5 had abundant wind resource over $400W/m^2$.

• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1746-1755
• /
• 2003

Operating characteristics of a triple pressure reheat HRSG are analyzed using a commercial software package (Gate Cycle by GE Enter Software). The calculation routine determines all the design parameters including configuration and area of each heat exchanger. The off-design calculation part has the capability of simulating the effect of any operating parameters such as power load, process requirements, and operating mode, etc., on the transient performance of the plant. The arrangement of high-temperature and intermediate-temperature components of the HRSG is changed, and its effect on the steam turbine performance and HRSG characteristics is examined. It is shown that there could be a significant difference in HRSG sizes even though thermal performance is not in great deviation. From the viewpoint of both economics and steam turbine performance, it should be carefully reviewed whether the optimum design point could exist. Off-design performance could be one of the main factors in arranging components of the HRSG because power plants operate at various off-design conditions such as ambient temperature and gas turbine load, etc. It is shown that different heat exchanger configurations lead to different performances with ambient temperature, even though they have almost the same performances at design points.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.6
• /
• pp.648-663
• /
• 2012

With recent attempts to improve quality and productivity, the prefabrication manufacturing system has been occupying an increasing share of the construction area. To minimize site work, material is more frequently being produced and partially assembled at a plant, and then installed at a site. For this reason, the production process is being divided and the materials are being delivered to the site after passing through multiple plants. With these changes in the production process, the materials delivery plan is becoming an important management point. In particular, as road transportation using trucks has a 71 percent share of the domestic transportation market, selecting the proper transportation path is important when delivering materials and equipment to a site. But the management system at the project design phase to calculate the delivery cost by considering the production process of the pre-fab material and the $CO_2$ emission at the material delivery phase is currently lacking. This study suggests a process design model for assembly production of the pre-fab material and transportation logistics based on carbon emission. The suggested model can be helpful to optimize the location of the intermediate plant. It is expected to be utilized as a basic model at the project plan and design phase when subcontractors make decisions on items such as materials procurement, selecting the production method, and choosing the location of the assembly plant.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.29-29
• /
• 2022

The fast-changing climatic conditions make plants to be vulnerable to many abiotic stresses. Drought stress is one of the limiting factors that affect pepper production in water deficient regions. It affects plant growth and development by altering physiological, morphological, and metabolic processes. Breeding drought tolerant varieties is one of the mitigation strategies to overcome the ever increasing drought disaster. Hence, screening of new drought tolerant pepper genotypes is essential. The current study was aimed to identify new drought tolerant genotypes among the collection of pepper genetic resources. In total, 70 pepper genotypes were screened for drought tolerance after exposure to drought stress condition. The pepper genotypes were classified as highly tolerant, intermediate, or severely sensitive to drought stress based on the phenotypic analysis. Consequently, 13 genotypes significantly exhibited higher recovery rate after drought stress and were classified as highly tolerant. Comparative analysis of morphological and physiological parameters and expression of drought responsive genes between tolerant and susceptible pepper genotypes will be presented and discussed. The identified tolerant genotypes will be useful resources for breeding drought tolerant pepper cultivars.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.6
• /
• pp.73-84
• /
• 2015

Nine plant species were selected through vegetation survey at three military shooting ranges at northern Gyeonggi Province. Plants were germinated in normal soil and three seedlings were transplanted to a bottom sealed pot containing sandy loam soils contaminated with either RDX (291 mg/kg) or TNT (207 mg/kg). Planted, blank (without plant), and control (without explosive compound) pots were grown in triplicate at a green house for 134 days. During cultivation, transplanted plants exhibited chlorosis and necrosis in flower and leaf by explosive toxicity and stress. Only three plants, Wild soybean, Amur silver grass, Reed canary grass, survived in TNT treated pot, while seven plant species except for field penny cress and jimson weed, thrived in RDX treated pot. Appreciable amount of TNT (61.6~241.2 mg/g-D.W.) was detected only in plant roots. Up to 763.3 mg/g-D.W. along with 4-amino-2,6-dinitrotoluene, an intermediate of TNT, accumulated in the root of wild soybean. In addition, azoxy compounds, abiotic intermediates of TNT, were detected in TNT treated soils. RDX absorbed average 1,839.95 mg/kg in shoot and 204.83 mg/kg in root. Most of TNT in plant was accumulated in underground part whereas RDX was localized in aerial part. Material balance calculation showed that more than 95% of the initial TNT was removed in the planted pots whereas only 60% was removed in the blank pot. The amount of RDX removed from soil was in the order of Amur Silver Grass (51%) > Chickweed (43%) > Evening primrose (38%). Based on the results of pot cultures, Amur silver grass and Reed canary grass are selected as tolerant remedial plants for explosive toxicity.

• Korean Journal of Plant Taxonomy
• /
• v.49 no.4
• /
• pp.324-333
• /
• 2019

Neutral genetic diversity found in plant species usually leaves an indelible footprint of historical events. Korea's main mountain range (referred to as the Baekdudaegan [BDDG]), is known to have served as a glacial refugium primarily for the boreal and temperate flora of northeastern Asia. In addition, life-history traits (life forms, geographic range, and breeding systems) influence the within- and among-population genetic diversity of seed plant species. For example, selfing species harbor significantly less within-population genetic variation than that of predominantly outcrossers. A previous study of two Liparis species (L. makinoana and L. kumokiri) emphasizes the role of the abovementioned factors shaping the levels of genetic diversity. Liparis makinoana, mainly occurring on the BDDG and self-incompatible, harbors high levels of within-population genetic diversity (expected heterozygosity, H_eP = 0.319), whereas there is no allozyme variation (H_eP = 0.000) in L. kumokiri, which is self-compatible and mainly occurs in lowland hilly areas. To determine if this trend is also found in other congeners, we sampled five populations of L. krameri from the southern part of the Korean Peninsula and investigated the allozyme-based genetic diversity at 15 putative loci. The somewhat intermediate levels of within-population genetic variation (H_eP = 0.145) found in L. krameri are most likely due to its occurrence in mountainous areas that, despite being outside of the main ridge of the BDDG, still served as refugia, and a self-incompatible breeding system. Management strategies are suggested for L. krameri and L. makinoana based on the levels and distribution of genetic diversity and inbreeding.