• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.200-203
• /
• 2003

By minimizing the burst error of data and correcting the error, we can define the convolution coding and interleaving in IEEE 802.11a wireless tan system. Two step block interleaver was decided by coded bits per OFDM symbol and due to this it comes to the delay time in IEEE 802.11a. This is the point of the question which we must consider. We try to decrease the delay time by all 48-clock from interleavings, and we have proposed a way carried out the interleaving outputs per symbol. So in comparison with the existing interleaver, we can decrease the delay time in reading and writing data, as well as reduce the delay time of bit re-ordering per symbol. Also this scheme is apply in all x-QAM cases.

• Journal of Communications and Networks
• /
• 제15권6호
• /
• pp.581-588
• /
• 2013

Based on an interleaving technique and quadriphase periodic complementary sequence (CS) mates, this paper presents a method for constructing a family of 16-quadrature amplitude modulation (QAM) periodic CS mates. The resulting mates arise from the conversion of quadriphase periodic CS mates, and the period of the former is twice as long as that of the latter. In addition, based on the existing binary periodic CS mates, a table on the existence of the proposed 16-QAM periodic CS mates is given. Furthermore, the proposed method can also transform a mutually orthogonal (MO) quadriphase CS set into an MO 16-QAM CS set. Finally, three examples are given to demonstrate the validity of the proposed method.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2005년도 하계학술대회
• /
• pp.427-430
• /
• 2005

A multi-code biorthogonal code keying (MBCK) system consists of multiple waveform coding blocks, and the sum of output codewords is transmitted. Drawback of MBCK is that it requires amplifier with high linearity because its output symbol is multi-level. MBCK with constant amplitude precoding block (CA-MBCK) has been proposed, which guarantees sum of orthogonal codes to have constant amplitude. The precoding block in CA-MBCK is a redundant waveform coder whose input bits are generated by processing the information bits. Redundant bits of constant amplitude coded CA-MBCK are not only used to make constant amplitude signal but also used to improve the BER performance at the receiver. In this paper, we proposed a transmission scheme which combines CA-MBCK with $Q^2PSK$ modulation to improve bandwidth efficiency of CA-MBCK and also uses chip interleaving to maintain a constant amplitude feature of CA-MBCK. bandwidth efficiency of a proposed transmission scheme is increased fourfold. And the BER performance of the scheme is same as that of CA-MBCK.

• Journal of Power Electronics
• /
• 제13권3호
• /
• pp.339-348
• /
• 2013

Multiphase dc-dc converters are widely used in modern power electronics applications due to their advantages over single-phase converters. Such advantages include reduced current stress in both the switching devices and passive elements, reduced output current ripple, and so on. Although the output current ripple of a converter can be significantly reduced by virtue of the interleaving effect, the inductor current ripple cannot be reduced even with the interleaving PWM method. One way to solve this problem is to use a coupled inductor. However, care must be taken in designing the coupled inductor to maximize its performances. In this paper, a detailed analysis of a coupled inductor is conducted and the effect of a coupled inductor on current ripple reduction is investigated extensively. From this analysis, a UU core based coupled inductor structure is proposed to maximize the performance of the coupled inductor.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 추계학술대회
• /
• pp.310-313
• /
• 1996

PET 방출스캔 영상과 MRI에서 추출한 머리 표피의 경계점들의 거리를 최소화하는 방법을 사용하여 두 영상의 위치정합을 시도하였다. 위치 정합된 두영상의 동시표현을 위하여 가중정규화 방법과 interleaving 방법을 시도하였다.

• ETRI Journal
• /
• 제40권6호
• /
• pp.699-713
• /
• 2018

Orthogonal frequency division multiplexing (OFDM) has been the overwhelmingly prevalent choice for high-data-rate systems due to its superior advantages compared with other modulation techniques. In contrast, a high peak-to-average-power ratio (PAPR) is considered the fundamental obstacle in OFDM systems since it drives the system to suffer from in-band distortion and out-of-band radiation. The partial transmit sequence (PTS) technique is viewed as one of several strategies that have been suggested to diminish the high PAPR trend. The PTS relies upon dividing an input data sequence into a number of subblocks. Hence, three common types of the subblock segmentation methods have been adopted - interleaving (IL-PTS), adjacent (Ad-PTS), and pseudorandom (PR-PTS). In this study, a new type of subblock division scheme is proposed to improve the PAPR reduction capacity with a low computational complexity. The results indicate that the proposed scheme can enhance the PAPR reduction performance better than the IL-PTS and Ad-PTS schemes. Additionally, the computational complexity of the proposed scheme is lower than that of the PR-PTS and Ad-PTS schemes.

• 한국항공우주학회지
• /
• 제49권7호
• /
• pp.581-588
• /
• 2021

본 논문은 전투기 레이다 공대공, 공대지 동시 운용 모드에서의 빔 스케줄링 방법을 다룬다. 양질의 전장 상황 인식을 위해 임무들의 우선순위와 더불어 공대공, 공대지 탐색 임무가 교차로 수행되어야 한다는 요구조건을 정립하였다. 그리고 이를 만족하기 위해 WMDD를 개선한 실시간 휴리스틱 빔 스케줄링 방법을 제안한다. 제안된 스케줄링 방법은 실제 레이다 임무 처리 메커니즘 및 측정 모델이 구현된 시뮬레이션 환경에서 비교 분석하였으며 임무 지연시간 관점에서의 성능 향상을 확인하였다.

• 대한임베디드공학회논문지
• /
• 제17권4호
• /
• pp.217-228
• /
• 2022

Currently, there are increasing demands for applying deep neural networks (DNNs) in the embedded domain such as classification and object detection. The DNN processing in embedded domain often requires custom hardware such as NPU for acceleration due to the constraints in power, performance, and area. Processing DNN models requires a large amount of data, and its seamless transfer to NPU is crucial for performance. In this paper, we developed a cycle-accurate NPU simulator to evaluate diverse NPU microarchitectures. In addition, we propose a novel technique for reducing the number of memory accesses when processing convolutional layers in convolutional neural networks (CNNs) on the NPU. The main idea is to reuse data with memory interleaving, which recycles the overlapping data between previous and current input windows. Data memory interleaving makes it possible to quickly read consecutive data in unaligned locations. We implemented the proposed technique to the cycle-accurate NPU simulator and measured the performance with LeNet-5, VGGNet-16, and ResNet-50. The experiment shows up to 2.08x speedup in processing one convolutional layer, compared to the baseline.

• 전기전자학회논문지
• /
• 제19권2호
• /
• pp.168-175
• /
• 2015

본 논문은 잔상효과를 이용해서 동영상 표출이 가능한 회전형 LED 전광판을 위한 FPGA 설계 기법을 제안한다. 제안된 기법은 역감마 보정과 오차 확산 방식을 이용한 데이터 보정 과정, 블록 인터리빙 과정, 데이터 시리얼 출력 과정 등의 3가지 과정으로 구성된다. 역감마 보정과 오차 확산 방식을 이용한 데이터 보정 과정은 영상 데이터를 선형 휘도 특성으로 변환하기 위한 역감마 보정과 역감마 보정에 의해 발생하는 저계조 휘도 감소 현상을 줄이기 위해 오차 확산 방식을 이용한 영상 데이터를 보정하는 단계이다. 영상 데이터 블록 인터리빙 과정은 가로열로 입력되는 프레임의 데이터를 입력순서에 맞추어 저장한 후, 세로열에 해당하는 데이터만을 읽어내는 단계이다. 데이터 시리얼 출력 과정은 고속으로 회전하는 LED Bar에 표출해야 할 데이터를 전송하기 위해서 회전 위치에 해당하는 병렬 데이터를 시리얼로 변환하여 LED Driver IC에 전송하는 단계이다. 제안된 FPGA 설계 기법의 정확성을 평가하기 위해서 FPGA는 Xilinx 사의 Spartan 6 계열의 XC6SLX45-FG484를 사용하였고 설계 툴은 ISE 14.5를 사용하였다. 역감마 및 오차확산 보정작업에 대한 정확한 동작, 블록 메모리 인터리빙 동작, 영상 데이터의 시리얼화 동작 등에 대하여 목표로 한 설정값과 시뮬레이션 결과값이 일치함을 확인 할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.706-709
• /
• 2002

This paper describes an effective technique for coding video sequences based on JPEG2000 codec. In the proposed method, multiple frames are combined into one large picture by interleaving each pixel data. A large picture enables images to be coded more efficiently and image quality is improved. A video sequence is efficiently coded by adapting the time correlation of the video sequences to spatial correlation. We demonstrated the effectiveness of this method by encoding video sequences using JPEG2000.