• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.3
• /
• pp.54-62
• /
• 1993

In this paper, performance comparisions of MTCM systems with 8DPSK over mobile communication channels are obtained by computer simulation. The multiple symbol differential detection scheme is introduced in order to improve the bit error rate performance in the detection of the trellis-coded 8DPSK system. Rician fading channels are used as test channels. The simula- tion results show that the trellis-coded 8DPSK system with multiple symbol detection gives better performance than that of the uncoded DQPSK system. And symbol by symbol interleaving method gives better performance than the symbol pair interleaving method.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.4
• /
• pp.14-19
• /
• 2010

In this paper, using interleaved power factor correction how to improve the inverter efficiency studied. Interleaved method can reduce the conduction losses and the inductor energy. Generally, critical conduction mode (CRM) boost PFC converter used low power level because of the high peak currents. if you use the interleaved mode, CRM PFC can be used medium or high power application. interleaved CRM PFC can reduce current ripple for higher system reliability and size of buck capacitor and EMI filter size. Interleaved CRM PFC that is installed in front of inverter can maintain the constant voltage regardless of the input voltage.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.1_2
• /
• pp.92-104
• /
• 2006

The proposed method for a force directed global placement algorithm exploits and extends techniques from two leading placers, Kraftwerk (& KraftwerkNC) and Mongrel. It combines the strengths of KraftwerkNC, force directed global placer, and Mongrel's ripple move technique which resolves cell overlaps effectively The proposed technique uses the force spreading technique used in Kraftwerk to optimize the ripple movement. While it is resolving the cell overlap and optimizing wire length physical net constraints are considered for timing. The experimental results obtained by the proposed approach shows significant improvement on wire length as well as on timing.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.4
• /
• pp.269-278
• /
• 2020

In this paper, two types of DC/DC converters in a hydrogen fuel cell hybrid railway vehicle system, which serve to charge high-voltage battery and supply power to an inverter for driving a driving motor, were compared and analyzed. A two-level interleaving boost converter and a three-level boost converter were compared and analyzed, and a theoretical design method was proposed to have an efficiency characteristic of over 95%. In addition, a digital controller design method considering the digital phase delay component of DSP (TMS320F28335) is presented. Finally, the validity of the theoretical design of the converter with 20kW power was verified through static and dynamic experiments respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.43-48
• /
• 2012

In As the proliferation of wireless LAN and smart devices like smart phone, the importance of the wireless Internet local broadcasting service is increasing. In order to provide broadcasting data for the multiple devices, one-way roadcasting technology which could not support re-transmission, should be used and the receiving frame error is major problem. Furthermore unlicense devices cause interference to the receiver, burst frame error tends to be happened. In this paper, new method to overcome the burst and random frame error is proposed and the effect is analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1548-1557
• /
• 1994

In this paper, the dual mode error correcting adaptive decoding algorithm which is adapted to the continuous phase frequency shift keying(CPFSK) modulation is presented as a technique for overcoming the distortion that reveals from the Rayleigh fading channel. The dual mode adaptive decoder nominally operates as a Viterbi decoder and switches to the burst error correcting mode, whenever the decoder detects an uncorrectable burst error pattern. Under the fading channel environment and when the usable memory quantity is restricted, the dual mode adaptive decoding algorithm shows an advantage in the BER performance over the interleaving technique, and also obtains the merit of not needing the large time delay that the interleaving technique requires. The experimental results from the computer simulation demonstrate the performance of the algorithm and verify the theoretical results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.6
• /
• pp.989-1005
• /
• 2010

Cooperative diversity is a technique with which a virtual multiple antenna array is established among the single antenna users of the wireless network to realize space diversity. Signal space diversity (SSD) is a bandwidth-efficient diversity technique, which uses constellation rotation and interleaving techniques to achieve diversity gain. A new cooperative diversity scheme with rotated constellations (RCCD) is proposed in this paper. In this scheme, data are modulated by using a rotated constellation, and the source and the relays transmit different components of the modulated symbols. Since any one of the components contains full information of the symbols, the destination can obtain multiple signals conveying the same information from different users. In this way, space diversity is achieved. The RCCD scheme inherits the advantage of SSD - being bandwidth-efficient but without the delay problem of SSD brought by interleaving. The symbol error rate of the RCCD scheme is analyzed and simulated. The analysis and simulation results show that the RCCD scheme can achieve full diversity order of two when the inter-user channel is good enough, and, with the same bandwidth efficiency, has a better performance than amplify-and-forward and detect-and-forward methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1496-1502
• /
• 1998

In this paper, a real-time audio broadcasting service system which is robust to loaded traffic on the Internet is developed. For implementing reliable real-time data transfer, the transfer characteristics of TCP/IP and UDP/IP was compared and analyzed. For lost packet recovery, redundant audio data algorithm was used and interleaving technique was applied for scattering consecutive packet loss. Test results showed, when using TCP/IP, pause occurred during playback, and when using UDP/IP, a stable receive rate was noticeable but the quality of the sound was lower than that of uisng TCP/IP. The recovery rate using redundant audio data and interleaving technique is shown in Fig. 9 and the delay is shown in Fig 4.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.158-165
• /
• 2000

In this paper, the transmission channels of L-band and Ka-band multi-media satellite communication systems for the land mobile satellite(LMS) communication service are modeled. Trellis coded(TC) 8PSK is proposed as a power and bandwidth efficient digital transmission scheme for the LMS system, and its error probability performance is analyzed. Block interleaving and deinterleaving are applied to the transmitter and receiver of LMS system respectively in order to compensate for the BER performance degradation of TC-8PSK caused by multipath fading. Viterbi equalizer is also employed in the receiver for channel equalization, and the corresponding BER performance improvement is analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.12
• /
• pp.1100-1107
• /
• 2015

In this paper, we propose an algorithm to identify Wobble PRI and Sinusoidal PRI among Radar pulses. We applied not only the DTOA(Difference Time Of Arrival) concept of radar pulse signals incoming to antennas but also a rising and falling cub characteristic of those PRIs. After making a program by such algorithm, we input each 40 data to Wobble PRI's and Sinusoidal PRI's identification programs and in result, those programs fully processed the data the according to expectations. In the future, those programs can be applied to the ESM, ELINT system.