• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.420-423
• /
• 2009

The conventional fixed gain PI controller is very sensitive to step change of command speed, parameter variation and load disturbances. The precise speed control of interior permanent magnet synchronous motor(IPMSM) drive becomes a complex issue due to nonlinear coupling among its winding currents and the rotor speed as well as the nonlinear electromagnetic developed torque. Therefore, there exists a need to tune the PI controller parameters on-line to ensure optimum drive performance over a wide range of operating conditions. This paper is proposed hybrid intelligent-PI(HIPI) controller of IPMSM drive using adaptive learning mechanism(ALM) and fuzzy neural network(FNN). The proposed controller is developed to ensure accurate speed control of IPMSM drive under system disturbances and estimation of speed using artificial neural network(ANN) controller. The PI controller parameters are optimized by ALM-FNN at all possible operating condition in a closed loop vector control scheme. The validity of the proposed controller is verified by results at different dynamic operating conditions.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.305-310
• /
• 2019

This paper proposes the method of exactly identifying both viscous and friction damping from free vibration response to SDOF structure. Both displacement and acceleration free vibration responses to SDOF system, in which both viscous and friction damping are considered as its damping mechanism, are discussed to verify the proposed method. The relationship for identifying both viscous and friction damping is derived from two consecutive amplitudes of displacement or acceleration peak response. The proposed method is verified through the numerical simulation for an assumed SDOF system consisting of mass, both viscous and friction damping and spring components.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.4
• /
• pp.77-83
• /
• 2022

Occupant behaviors and body contact with vehicle interior parts are main injury mechanism in far-side collisions. In vehicle side impact accident where the crash accident occurs on the opposite side of the vehicle from the a particular occupant, it is exposed in terms of relatively larger lateral motion to interact with the opposite side of the vehicle structure. The challenge of minimizing motions of upper body and injury risk according to a direct contact is a primary occupant protection research. This study has performed a data analysis of real-world accident database extracted from the 2016~2020 CISS database and a parametric investigation of impact angles and occupant kinematics in far-side lateral and oblique impact simulations. A detailed data analysis was conducted to reveal the relationship among the accident and injury data. Database analysis and computational far-side impact results proposed the fundamental vehicle design for safety improvement in far-side collisions.

• Korean Institute of Interior Design Journal
• /
• v.27 no.2
• /
• pp.3-11
• /
• 2018

This study aims to investigate whether there is intensionally changing eye - gaze on the cafe space images with floor finishing materials. In the Yarbus' experiment, he argued that changing information that an observer is asked to obtain from an image changes pattern of eye movements. Based on the scan path evidence, this research have questions as (1) the difference of visual attention on finishing floor material stimulus, (2) visual attention of initial activity time and type of movement paths on AOIs, and (3) visual relation floor area with another AOIs. Eye movements were recorded with the SMI REDn Scientific, which sampled eye position at 30Hz and lasted 2 minutes(120s). Although viewing was binocular, only the right eye was tracked. Of the 66 observers(mean age 22 years, standard deviation: ${\pm}1.82$) who participated in the experiment done by the four point calibration and validation procedures at the beginning tasks. Analyzing qualitative data from the number of fixation and duration on AOIs divided into four parts (AOI I-Floor, AOI II-Wall, AOI III-Ceiling, and AOI IV-Counter) in the stimulus. The results from this experiment analyzed as follows. First, it was significant in the difference of the average number of AOIs fixation times observed for the spatial image using the wood tile flooring material and the polishing tile. The wood tile flooring of stimulus had higher fixation number on AOI-II, AOI-III, and AOI-IV than the polishing tile. On seeing AOI-I was higher attention in the polishing tile stimulus. Second, the observers examined AOI-II intensively in both stimuli. However, the visual intensity was also followed by on the AOI-IV and AOI-I in the wood tile flooring stimulus, and on AOI-I, AO-IV in the polishing tile. Third, visual attention data on each AOIs have divided into the time range of "5 sec" for both images. In the wood tile stimulus, the horizontal movement path followed by AOI-II, AOI-IV, and AOI-II. In the polished tile stimulus, the movement path followed by moving vertically to AOI-II, AOI-I, and AOI-II. This study approached meaningfully and found out the characteristics of visual attention, according to the different intentions of visual attention, the relationship pathways of visual mechanism appeared and also activated by eye-tracking experiments.

• The Korean Journal of Physiology and Pharmacology
• /
• v.8 no.2
• /
• pp.83-88
• /
• 2004

The purpose of this study was to provide a basis for studying the molecular mechanism of pharmacological action of chlorhexidine digluconate. Large unilamellar vesicles (OPGTL) were prepared with total lipids extracted from cultured Porphyromonas gingivalis outer membranes (OPG). The anthroyloxy probes were located at a graded series of depths inside a membrane, depending on its substitution position (n) in the aliphatic chain. Fluorescence polarization of n-(9-anthroyloxy)stearic acid was used to examine effects of chlorhexidine digluconate on differential rotational mobility, while changing the probes' substitution position (n) in the membrane phospholipids aliphatic chain. Magnitude of the rotational mobility of the intact six membrane components differed depending on the substitution position in the descending order of 16-(9-anthroyloxy)palmitic acid (16-AP), 12, 9, 6, 3 and 2-(9-anthroyloxy)stearic acid (12-AS, 9-AS, 6-AS, 3-AS and 2-AS). Chlorhexidine digluconate increased in a dose-dependent manner the rate of rotational mobility of hydrocarbon interior of the OPGTL prepared with total lipids extracted from cultured OPG, but decreased the mobility of membrane interface of the OPGTL. Disordering or ordering effects of chlorhexidine digluconate on membrane lipids may be responsible for some, but not all of its bacteriostatic and bactericidal actions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3B
• /
• pp.360-374
• /
• 2004

The OSPF protocol is the most widely used Interior Gateway Routing Protocol. Therefore, for the reliability of behavior of gigabit swiching routers, it is essential to guarantee the interoperability and the safety of the OSPF protocol. In this paper, we analyze the standard document of the OSPF protocol, so that we provide a formal specification that specifies the protocol behaviors by detailed design level using the algebraic formal method. By referring available source codes of the OSPF protocol, we supplement the formal specification to express more detailed behaviors that is not specified definitely in the standard. We also formally verify the interoperability and the safety of the protocol state machine of the specification. By showing that the formal specification specify all of the states and the transition events that appear in the standard document of the OSPF protocol, we prove that the state machine has the completeness, and prove it has the interoperability. To prove that the specification of the protocol has the safety, we formally verify the reachability, the liveness, the livelock-free property, and the deadlock-free property. As a result, we prove the protocol has the consistency. The specification and the validation are also effective to the OSPF Version 3 that inherit the protocol mechanism of the OSPF Version 2.

• International Journal of Oral Biology
• /
• v.42 no.4
• /
• pp.175-181
• /
• 2017

The aim of this study was to provide a basis for the molecular mechanism underlying the pharmacological action of ethanol. We studied the effects of 1-propanol on the location of n-(9-anthroyloxy)palmitic acid or stearic acid (n-AS) within the phospholipids of synaptosomal plasma membrane vesicles (SPMV). The SPMV were isolated from the bovine cerebral cortex and liposomes of total lipids (SPMVTL) and phospholipids (SPMVPL). 1-Propanol increased the rotational mobility of inner hydrocarbons, while decreasing the mobility of membrane interface, in native and model membranes. The degree of rotational mobility varied with the number of carbon atoms at positions 16, 12, 9, 6 and 2 in the aliphatic chain of phospholipids in the neuronal and model membranes. The sensitivity of increasing or decreasing rotational mobility of hydrocarbon interior or surface by 1-propanol varied with the neuronal and model membranes in the following order: SPMV, SPMVPL and SPMVTL.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.9
• /
• pp.37-43
• /
• 2006

Dynamic numerical analysis of geotechnical problems requires a way to simulate the decrease of energy as the domain of interest gets larger. This phenomenon is usually referred to as radiation damping or geometric attenuation and it is distinguished from material damping in which elastic energy is actually dissipated by viscous, hysteretic, or other mechanism. The fact that the domain of analysis in numerical modeling must be chosen, however, causes a need for special attention at the boundary. This observation leads directly to the idea of determining the dynamic response of the interior region from a finite model consisting of the interior region subjected to a boundary condition which ensures that all energy arriving at the boundary is absorbed. This paper presents a simple methodology to simulate transmitting boundaries condition using viscoelastic infinite elements within the recently developed "OpenSees" finite element code. The methodology used here provides that the level of absorption for traveling waves is efficient enough for practical purposes, but unsatisfactory for the case of sharp incident angles. The effectiveness of the infinite elements for the absorption of incident waves at boundaries is evaluated via example analysis.

• Journal of Korean Living Environment System
• /
• v.24 no.5
• /
• pp.654-664
• /
• 2017

The use of environmentally friendly finishing materials allows us to create a space where we can feel nature and to have stability and peace in the city center. In this paper, we examined the sensitivity of people to the three café spaces where wooden finishing materials are used in the space elements that change according to people's demands for environmentally friendly space due to pollution of living environment. First, we examined the wood and finishing materials and emotional vocabulary through literature review and previous research. Second, the values of L ^*, a ^*, b^* and sR, sG and sB values were extracted by using a line spectrophotometer (Ci6X). Third, we conducted a 7 - point scale questionnaire based on the extracted 13 pairs of emotional vocabulary. Using SPSS 21, frequency analysis by descriptive statistics, crossover analysis by visiting purpose and intention, and emotional lexical factor analysis were performed. Through the study, the following points were found. First, CB (The Coffee Bean), SB (Starbucks) and HS (Hollys Coffee) showed differences in CB (65%), SB (40%) and HS (37%) in the spatial analysis. Second, CB gave color similar to the color of wall and furniture wood, but HS changed the color or brightness of wood finishing color of furniture. HS or SB showed favorable use of wood color scheme. Third, SB (26.3%) and HS (19.7%) were selected by taste. Fourth, there were differences in the items of CB, 'local-exotic' and SB 'dark-bright' in the factor value. The use of wood finishing materials differed in the atmosphere evaluation depending on the spatial factors and the color of the furniture. However, in this study, there are many factors that are insufficient in the accuracy of the ratio of the applied wood finishing material to the space element and the amount of the survey. If we further study the evaluation of emotional image according to the ratio of wood finishing materials, we think that it is necessary to study now that interest in environmentally friendly is increasing.

• BMB Reports
• /
• v.49 no.12
• /
• pp.681-686
• /
• 2016

Fructose 1,6-bisphosphate aldolase (FBA) is important for both glycolysis and gluconeogenesis in life. Class II (zinc dependent) FBA is an attractive target for the development of antibiotics against protozoa, bacteria, and fungi, and is also widely used to produce various high-value stereoisomers in the chemical and pharmaceutical industry. In this study, the crystal structures of class II Escherichia coli FBA (EcFBA) were determined from four different crystals, with resolutions between $1.8{\AA}$ and $2.0{\AA}$. Native EcFBA structures showed two separate sites of Zn1 (interior position) and Zn2 (active site surface position) for $Zn^{2+}$ ion. Citrate and TRIS bound EcFBA structures showed $Zn^{2+}$ position exclusively at Zn2. Crystallographic snapshots of EcFBA structures with and without ligand binding proposed the rationale of metal shift at the active site, which might be a hidden mechanism to keep the trace metal cofactor $Zn^{2+}$ within EcFBA without losing it.