• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1180-1182
• /
• 1999

Modeling for utility interactive photovoltaic power generation system has been studied using PSCAD/EMTDC. The proposed model system consists of a simple utility circuit configuration, 3kW of single phase utility interactive photovoltaic system, single phase PWM voltage source inverter module, and feed forward PID controller as control circuit. In the system, the DC current is assumed constant, and the voltage source inverter provides sinusoidal ac current for the loads of utility system. The simulation results are given in order to verify the effectiveness of the proposed model. The phases of output voltage of utility system and the output current of the inverter module are compared. Especially, the compensation effect of the photovoltaic system for the unbalanced load is analyzed. and the transient phenomena for a phase to ground fault are also simulated.

• 전기학회논문지
• /
• 제56권2호
• /
• pp.317-324
• /
• 2007

Most conventional hybrid systems using renewable energy sources have been applied for stand-alone operation, but Utility-interface may be an useful and viable option for hybrid systems. Grid-connected operation may have benefits such as reduced losses in power system distribution, utility support in demand side management, and peak load shaving. This paper addresses power control and dynamic performance of a grid-connected PV/wind/BESS hybrid system. At all times the PV way and the wind turbine are individually controlled to generate the maximum energy from given weather conditions. The battery energy storage system (BESS) charges or discharges the battery depending on energy gap between grid invertger generation and production from the PV and wind system. The BESS should be also controlled without too frequently repeated shifts in operation mode, charging or discharging. The grid inverter regulates the generated power injection into the grid. Different control schemes of the grid inverter are presented for different operation modes, which include normal operation, power dispatching, and power smoothing. Simulation results demonstrate that the effectiveness of the proposed power control schemes for the grid-interactive hybrid system.

• Ocean Systems Engineering
• /
• 제7권4호
• /
• pp.329-344
• /
• 2017

This paper introduces a BEM/RANS interactive scheme to predict the contra-rotating propeller (CRP) performance. In this scheme, the forward propeller and the aft propeller are handled by two separate BEM models while the interactions between them are achieved by coupling them with a RANS solver. By using the body force field and mass source field to represent the propeller in the RANS model, the number of RANS cells and the number of required RANS iterations reduce significantly. The method provides an efficient way to predict the effective wake, the steady/unsteady propeller forces, etc. The BEM/RANS interactive scheme is first applied to a CRP in both an axisymmetric manner and a non-axisymmetric manner. Results are shown in good agreement with the experimental data in moderate to high advance ratios. It is proved that the difference between the axisymmetric scheme and the non-axisymmetric scheme mainly comes from the non-axisymmetric bodies. It is also found that the error is larger at lower advance ratios. Possible explanations are given. Finally, some additional cases are tested which justifies that the non-axisymmetric BEM/RANS scheme is able to handle a podded CRP working at given inclination angles.

• Journal of Power Electronics
• /
• 제2권4호
• /
• pp.250-257
• /
• 2002

This paper introduces the Interactive Power Electronics Seminar - iPES - a new software package for teaching of fundamentals of power electronic circuits and systems. iPES is constituted by HTML text with Java applets for interactive animation, circuit design and simulation and visualization of electromagnetic fields and thermal issues in power electronics. It does comprise an easy-to-use self-explaining graphical user interface. The software does need just a standard web-browser, i.e. no installations are required. iPES can be accessed via the World Wide Web or from a CD-ROM in a stand-alone PC by students and professionals. Due to the underlying software technology iPES is very flexible and could be used for on-line learning and could easily be integrated into an e-learning platform. The aim of this paper Is to give an introduction to the iPES-project and to show the different areas covered. The e- learning software is available at no costs at $\underline{www.ipes.ethz.ch}$ in English, German, Japanese, Korean, Chinese and Spanish. The project is still under development and the web page is updated in about 4 weeks intervals.

• 전력전자학회논문지
• /
• 제12권4호
• /
• pp.346-353
• /
• 2007

본 논문은 단상풀브릿지 구조를 갖는 계통연계형 전압형 PWM 인버터를 위한 필터설계를 목적으로 한다. 단상풀브릿지 전압형 PWM 인버터의 교류출력단 전압과 계통전압의 관계를 분석하여 필터인덕터에 순시적으로 인가되는 전압의 특징적인 관계를 정성적 및 정량적으로 파악하였다. 교류출력단 전압의 분석을 기초로 하여 필터인덕터에 흐르는 스위칭리플전류의 크기를 정량적으로 구하였다. 이러한 분석을 기초로 하여 계통주입전류의 기본파성분에 대한 리플전류의 비율을 평가함수로 하는 필터인덕터의 설계법을 제시하였다. 제안된 설계방법을 시뮬레이션 및 실험을 통하여 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.440-442
• /
• 1995

In a recently as renewable energy source photovoltaic(PV) system using solar energy has been very widely researched because of its pollution-free and infinity. Especially many researches are intensively focused on small scale utility interactive PV system which can use dead space and easily make power stabilized from unstable natural energy source. In this system one of the most important matters is islanding protection. Islanding phenomenon appears when power failure occurs. For the safety of utility interactive PV system must has the function of not only system protection but also detection of islanding. This paper describes parallel operating alghorithm using reactive power variation method and twin peak band pass filter. This alghorithm is verified useful by simulation.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 추계학술발표대회
• /
• pp.1367-1369
• /
• 2013

Applying Application-Level Multicast technology (ALM) to Distributed Interactive Applications (DIAs) becomes more and more popular. Especially for DIAs embedded priority that the sender forwards data to receivers due to their respective priorities. The priority-based directed minimum spanning tree (PST) algorithm was designed for these DIAs. However, the PST has no efficient priority selection and filtering mechanism. The system will consume a tremendous amount of resource for reconstructing distribution tree and becomes unstable and unscalable. In this paper, First, We propose a novel priority-based application level multicast algorithm: Predict-and-Quantize for Priority with directed minimum Spanning Tree (PQPST), which can efficiently predict efficient priorities for the receivers and quantize the predicted priorities to build the multicast distribution tree. Second, we propose Priority Discrepancy Heuristic Mechanism (PDHM), which sets different thresholds of priority discrepancy within the priority discrepancy interval to control the distribution tree construction can efficiently decrease the repeated distribution tree construction, and we get the best heuristic priority discrepancy interval by PQPST. According to the simulation results, the PQPST and PDHM can efficiently improve the performance of the PST algorithm.

• Geomechanics and Engineering
• /
• 제9권2호
• /
• pp.145-167
• /
• 2015

Digital simulation has recently become the preferred method for designing complex and dynamic systems. Simulation packages provide interactive, block-diagram environment for modeling and simulating dynamic models. The block diagrams in simulation models are flowcharts which describe the components of dynamic systems and their interaction. This paper is the first part of the study for determining the seismic behavior of soil systems. The aim of this part is to present the constructed block diagrams for discrete-time analysis of seismic site amplification in layered media for vertically propagating shear waves. Detailed block diagrams are constructed for single and multiple soil layers by considering wave propagation with and without damping, respectively. The block diagrams for recursive filter to model attenuation in discrete-time form are also constructed. Finite difference method is used for strain calculation. The block diagrams are developed by utilizing Simulink which is a software add-on to Matlab.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1999년도 추계학술대회 논문집
• /
• pp.210-216
• /
• 1999

Todays computer communication technology let people to do many unrealistic things possible and the use of those technologies is becoming increasingly prevalent throughout the military operation. Both DIS and ADS are welled defined computer aided military simulations. This study discusses a simulation of stochastic combat network modeling through Internet. We have developed two separate simulation models, one for clients and another for server, and validated for conducting studies with these two models. The object-oriented design was necessary to define the system entities and their relationship, to partition functionality into system entities, and to transform functional metrics into realizations derived from system component behaviors. Heterogeneous forces for each side are assumed at any battle node. The time trajectories for mean number of survivors at each node, some important combat measures, and relative difference computations between models were made. We observe and may conclude that the differences exist and some fo these are significant based on a limited number of experiments.

• 한국국방경영분석학회지
• /
• 제26권2호
• /
• pp.101-119
• /
• 2000

US DoD designated the High LEvel Architecture (HLA) as the standard technical architecture for all military simulation since 1996. HLA will supercede the current Distributed Interactive Simulation(DIS) and Aggregated LEvel Simulation Protocol(ALSP) methods by no funds for developing/modifying non-HLA compliant simulations. The new architecture specifies Rules which define relationships among federation components, an Objects Model Template which species the form which simulation elements are described, and an Interface Specification which describes the way simulations interact during operations. HLA is named as standard architecture in NATO, Australia and many other militaries. Also, it will be IEEE standard in the near future. It goes without saying that ROK military whose simulation models are almost from US must be prepared in areas such as ROK-US combined exercise, training, weapon system acquisition, interface models with C4I system, OPLAN analysis, operations, and os on. In this paper, we propose several effective alternatives and issues for ROK Defense Modeling and Simulation under the transition of new HLA architecture. Those include secure the kernel of new simulation technology and develop our own conceptual model, RTI software, prototype federation for each service and aggregated one. In order to challenge the new simulation architecture effectively, we should innovate our current defense modeling and simulation infrastructure such s manpower, organization, budget, research environment, relationships among academia and industry, and many others.