• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.3
• /
• pp.245-251
• /
• 2013

The effect of band-to-band tunneling (BTBT) leads to an obvious increase of the leakage current of junctionless (JL) transistors in the OFF state. In this paper, we propose an effective method to decline the influence of BTBT with the example of n-type double gate (DG) JL metal-oxide-semiconductor field-effect transistors (MOSFETs). The leakage current is restrained by changing the geometrical shape and the physical dimension of the gate of the device. The optimal design of the JL MOSFET is indicated for reducing the effect of BTBT through simulation and analysis.

• The KIPS Transactions:PartB
• /
• v.9B no.3
• /
• pp.351-358
• /
• 2002

Video compression based on DCT (Discrete Cosine Transform) has weakpoints of blocking artifacts and pixel loss when the resolution is changed. DWT (Discrete Wavelet Transform) based method can overcome such problems. In SAMCoW (Scalable Adaptive Motion Compensation Wavelet), one of wavelet based video coding algorithm, both intra frames and motion compensated error frames are encoded using EZW(Embedded Zerotree Wavelet) algorithm. However the property of wavelets transform coefficients of motion compensated error frames are different from that of still images. Signal energy is not highly concentrated in the lower bands which is true for most still image cases. Signal energy is rather evenly distributed over all frequency bands. This paper suggests a new video coding algorithm utilizing these properties. Spatial band coding which is known to be very effective for encoding images with relative1y high frequency components and not utilizing the interband coefficients correlation is applied instead of EZW to encode both intra and inter frames. In spatial band coding, the position and value of significant wavelet coefficients in each band are progressively transmitted. Unlike EZW, inter band coefficients correlations are not utilized in spatial band coding. It has been shown that spatial band coding gives better performance than EZW when applied to wavelet based video compression.

• Progress in Superconductivity and Cryogenics
• /
• v.26 no.2
• /
• pp.9-18
• /
• 2024

The current study deals with the possible interplay between superconductivity and spin density wave in two band model high temperature iron based superconductor (FeBSC) Ba_1-xNa_xFe₂As₂. The electron and hole bands in the presence of the inter-band interaction between the two bands is becoming a vital issue to deal with the high temperature physics of the iron-based superconductors. In this research work, a model Hamiltonian appropriate for the system under consideration has been developed and the temperature dependent Green's function technique has been employed to get the solution for the equations of motion constructed for the two band model high temperature FeBSC Ba_1-xNa_xFe₂As₂. By making use of the decoupling procedure, the equations of motion for the dependence of superconducting transition temperature (T_C) on spin density wave(SDW) order parameter (Δ_SDW) in the electron intra-band (Δ_sc(e)) , hole intra-band (Δ_sc(h)) and inter-band (Δ_sc(eh)) for Ba_1-xNa_xFe₂As₂ have been obtained. We have also obtained the expression for the dependence of spin density wave transition temperature(T_SDW) on Δ_SDW for Ba_1-xNa_xFe₂As₂. Using some plausible approximations and appropriate experimental values for the parameters in the obtained equations of motion, phase diagrams of T_C versus Δ_sc(e), Δ_sc(h) and Δ_sc(eh) are plotted. Furthermore, a phase diagram of T_SDW versus Δ_SDW is plotted for the material under consideration. Finally, using the above mentioned phase diagrams, the interplay between superconductivity and spin density wave in the two band model high temperature FeBSC Ba_1-xNa_xFe₂As₂ has been demonstrated to be a very distinct possibility. The agreement of the current finding with the experimental observations is quite commendable.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.643-646
• /
• 2000

In this study, we constructed a preview-sensing visual sensor system for weld seam tracking in real time in GMA welding. A sensor part consists of a CCD camera, a band-pass filter, a diode laser system with a cylindrical lens, and a vision board for inter frame process. We used a commercialized robot system which includes a GMA welding machine. To extract the weld seam we used a inter frame process in vision board from that we could remove the noise due to the spatters and fume in the image. Since the image was very reasonable by using the inter frame process, we could use the simplest way to extract the weld seam from the image, such as first differential and central difference method. Also we used a moving average method to the successive position data of weld seam for reducing the data fluctuation. In experiment the developed robot system with visual sensor could be able to track a most popular weld seam, such as a fillet-joint, a V-groove, and a lap-joint of which weld seam include planar and height directional variation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.4
• /
• pp.54-60
• /
• 2001

In this thesis, We analyze performance evaluation of one channel B-WLL IF receiver system. Among the item of receiver performance, inter-modulation interference and yield analysis is especially focused. Since inter-modulation interference cause bad influence on system performance due to unwanted third order harmonic located in desired frequency band, third order harmonic causing inter-modulation interference should be efficiently removed. Yield analysis is observing influence on system performance when system element parameter is statistically varied, and in this thesis, system output is observed for LNA parameters. Additionally, Scheme for LNA gain adjustment to reduce inter-modulation interference is proposed by observing variation of third order harmonic output for LNA gain variation.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.3-6
• /
• 2004

This paper. we investigate the OFDM-based wireless LAN systems operating in the 60 GHz frequency band as part of the fourth-generation (4G) systems. The 60 GHz band is of much interest since this is the band in which a massive amount of spectral space (5 GHz) has been allocated worldwide for dense wireless local communications. This paper gives an overview of 60 GHz indoor wireless channel characteristics and an effect on phase noise. The performance of OFDM system is severely degraded by the local oscillator phase noise, which causes both common phase error and inter-carrier interference. We provide the exact analysis of the phase noise effect on the OFDM system.

• Phonetics and Speech Sciences
• /
• v.1 no.4
• /
• pp.97-103
• /
• 2009

This paper describes a new algorithm for encoding spectral envelope in the time domain alias cancellation (TDAC) part of G.729.1. The spectral envelope and modified discrete cosine transform (MDCT) coefficients of the weighted code-excited linear predictive (CELP) coding error in lower-band and the higher-band input signal are encoded in the TDAC part. In order to reduce allocation bits for spectral envelope coding, a new algorithm using sub-band correlation between adjacent frames is proposed. In addition, to improve the quality of decoded signals, two bit allocation strategies using reduced bits from the proposed algorithm are proposed. The performance of the proposed algorithm is evaluated in terms of objective quality and bit reduction rates. Experimental results show that the proposed algorithm increases the quality of sounds significantly.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.4
• /
• pp.443-450
• /
• 2009

This paper deals with the design of decentralized controller for load-frequency control of interconnected power systems with superconducting magnetic energy storage units and Governor Dead Band Nonlinearity using Multi-Objective Evolutionary Algorithm. The superconducting magnetic energy storage unit exhibits favourable damping effects by suppressing the frequency oscillations as well as stabilizing the inter-area oscillations effectively. The proposed control strategy is mainly based on a compromise between Integral Squared Error and Maximum Stability Margin criteria. Analysis on a two-area interconnected thermal power system reveals that the proposed controller improves the dynamic performance of the system and guarantees good closed-loop stability even in the presence of nonlinearities and with parameter changes.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.32-37
• /
• 2010

The algorithm of multiple channel signal processing requires the flexibility of variable frequency band, efficient allocation of transmission power, and flexible frequency band reallocation to satisfy various service types which requires different transmission rates and frequency band. There are three methods including per-channel approach, multiple tree approach, and block approach performing frequency band reallocation method by channelization and dechannelization in the multiple-channel signal. This paper proposes an improved per-channel approach for converting the frequency band of multiple carrier signals efficiently. The proposed algorithm performs decimation and interpolation using CIC(cascaded integrator comb filter), half-band filter, and FIR filter. In addition, it performs filtering of each sub-channel, and reallocates channel band through FIR low-pass filter in the multiple-channel signal. The computer simulation result shows that the perfect reconstruction of output signal and the flexible frequency band reallocation is performed efficiently by the proposed algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.899-906
• /
• 2017

This paper proposes an inter-floor noise prevention system using an open-source controller. In the proposed system, Arduino which is a widely used open source controller analyzes sound signals and vibration signals with fast fourier transform. When the magnitude of the band-passed signal excesses the noise reference considering transmission loss of a panel or a wall, the system displays warning messages on an LCD module and a mobile device for users to be aware of the noise condition. In the experiment, the system has succeeded extracting and processing the band-passed signals between 130 Hz ~ 1040 Hz. When the magnitude of the extracted signal that is subtracted from the transmission loss exceeds 45 dB, the system has displayed the warning message on an LCD module and a mobile devicefor noise reduction.