• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.28-29
• /
• 2000

Optical power splitters and/or couplers are important components for optical signal distribution between channels both in wavelength division multiplexing(WDM) systems and photonic integrated circuits(PICs). Since polarization is usually not known after propagation in an optical fiber, passive WDM components have to be polarization insensitivity, Compared to alternatives such as directional couplers or Y-junction splitters, splitters based on multimode interference(MMI) have found a growing interest in recent yens because of their desirable characteristics, such as compact size, low excess loss, wide bandwidth, polarization independence, and relaxed fabrication tolerances$^{(1)}$ . These devices have been fabricated in polymers, silica, or III-V semiconductor materials. A1 $\times$ 4 MMI power splitter on InP materials that were suitable for application in the 1.55-${\mu}{\textrm}{m}$ region$^{(2)}$ . However, the fabrication process of the structure is too complicated and the photolithography tolerance is very tight. Also, a 1 $\times$ 16 InGaAsP/InP MMI power splitter with an excess loss of 2.2dB and a splitting ratio of 1.5dB was demonstrated by using deep etching$^{(3)}$ . The deep etching of the sidewalls through the entire guide layer of the slab waveguide resulted in a number of drawbacks$^{(4)}$ . (omitted)

• KSBB Journal
• /
• v.22 no.6
• /
• pp.378-386
• /
• 2007

Bio-sensing devices, which are basically integrated and miniaturized assay systems consisted of bioreceptor and signal transducer, are advantageous in several ways. In addition to their high sensitivity, selectivity, simplicity, multi-detection capability, and real time detection abilities, they are both very small and require relatively inexpensive equipments. Two core technologies are required to develop bio-sensing devices; the fabrication of biological receptor module (both of receptor development and immobilisation of them) and the development of signal transducing instruments containing signal generation technique. Various biological receptors, such as enzymes, DNA/RNA, protein, and cell were tried to develop bio-sensing devices. And, the signal transducing instruments have also been extensively studied, especially with regard to electrochemical, optical, and mass sensitive transducers. This article addresses bio-sensing devices that have been developed in the past few years, and also discusses possible future major trends in these devices.

• Korean Journal of Optics and Photonics
• /
• v.27 no.5
• /
• pp.174-180
• /
• 2016

A tunable optical delay line is designed, fabricated, and characterized. The tunable delay line consists of four polymer-ring add/drop filters with delay waveguides between adjacent ones. The polymer waveguide is a buried structure, designed to be square with core width and height of $1.8{\mu}m$. The refractive indices of the core and cladding polymer are 1.48 and 1.37 respectively. The large index difference and small cross section of the waveguide enable us to realize a compact device using a small radius of curvature. Four pairs of electrodes are evaporated above the add/drop filters to provide heating currents for thermal tuning. In measurements we can identify variable time delays of 110, 225, and 330 ps in proportion to the number of delay lines.

• Korean Journal of Optics and Photonics
• /
• v.33 no.3
• /
• pp.106-112
• /
• 2022

A two-dimensional optical code division multiple access (OCDMA) encoder/decoder, which is composed of add/drop filters and all-pass filters for delay operation, is proposed. An example design is presented, and its feasibility is illustrated through numerical simulations. The chip area of the proposed OCDMA encoder/decoder could be about one-third that of a previous OCDMA device employing delay waveguides. Its performance is numerically investigated using the transfer-matrix method combined with the fast Fourier transform. The autocorrelation peak level over the maximum cross-correlation level for incorrect wavelength hopping and spectral phase code combinations is greater than 3 at the center of the correctly decoded pulse, which assures a bit error rate lower than 10^-3, corresponding to the forward error-correction limit.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.145-150
• /
• 2023

Non-uniform optical taper waveguides have been widely used as devices for high-efficiency mode coupling, as they are integrated with single-mode optical fibers or photonic crystal waveguides. In this paper, we present a new platform for chemical sensing and bio-sensing using optical taper waveguides with these characteristics. The principle of operation is based on the coupling efficiency and interference properties of optical directional coupler (DC) and multi-mode interference coupler (MMIC). First, the curvature characteristics of taper sections of DC and MMIC is explained, and the design specifications of optimized taper waveguide to increase waveguide sensitivity is selected. Next, the sensor response to the change in refractive index of sensing analyte is numerically analyzed. Numerical results show that as the length of couplers increases, the effective index per change in refractive index unit (RIU) of analyte increases, and that sensitivity can be tuned using taper DC and MMIC design techniques.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.123-128
• /
• 2010

We have investigated the properties of the novel triangular ring resonator with the total internal reflection mirrors and the semiconductor optical amplifier for photonic integrated circuits (PIC). A novel triangular resonators containing active and passive sections are fabricated and characterized with various multimode interference (MMI) lengths. The optimum MMI length and width turn out to be 108 and 9 ${\mu}m$, respectively. A free spectral range of approximately 228 GHz is observed near 1558 nm along with an on-off ratio of 9 dB. The proposed triangular resonator has a good advantage to remove the direct coupling between the two access waveguides of the MMI coupler. Hence, such resonators can be directly integrated with other devices making compact and highly functional PIC possible.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1833-1841
• /
• 1997

Rectangular dielectric waveguides, the most fundamental and indispensible elements in integrated optics, have been investigated by many researchers with various approaching methods including from the relatively approximate techniques to the numerical method. In this paper, the optimum equivalent waveguide model is adopted which is determined by a perturbation feedback process for analyzing the propagation constant by means of computer simulation, we have ascertained that the propagation constant from perturbation feedback method gives the best approximate value because it coincide with more exact value than obtained by other approximating methods. The technique also provides analytical expression for the modal field profile that should be useful in the design of various integrated optical devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.198-205
• /
• 2016

In the contemporary world, the breakthrough of the ultra-modern technologies has been blessed with the camera. This device has become omnipresent either integrated on with other devices such as smartphones, notebooks, laptops, handheld devices and so on. In addition, digital signage, display and monitors have also become very widespread around us everywhere. These types of scenarios have made imaginable to imagine about the consuming of the unused resources. The dual use of displayed contents can make it possible to use it as an advertisement as well as a transmitter for camera based communication. In this study, a digital watermarking algorithm based communication method has been analyzed. We have introduced Binary Pattern (BP) based a new message extracting algorithm to extract message in an efficient way from the watermarked image compared to other algorithms. Besides, the previous works using camera and display have been illustrated using comparative analysis. This paper has demonstrated an advantageous overview using the experimental results which reveals that the proposed methodology significantly reduces the complexity while augmenting the advantages of the proposed scheme. Moreover, the simulation results have shown the advantages of the proposed scheme over the other schemes.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.389-390
• /
• 1996

The CCDs are widely used in astronomical observations either in direct imaging use or spectroscopic mode. However, the areas of available sensors are too small for large imaging format. One possibility to obtain large detection area is to assemble mosaics of CCD, and drive them simultaneously. Parallel driving of many CCDs together rules out the possibility of individual tuning; however, such optimisation is very important, when the ultimate low light level performance is required, particularly for new, or mixed devices. In this work, a new concept is explored for an entirely novel approach, where the drive waveforms are multiplexed and interleaved. This simultaneously reduces the number of leadout connections and permits individual optimisation efficiently. The digital controller can be designed within a single EPLD (Erasable Programmable Logic Device) chip produced by a CAD software package, where most of the digital controller circuits are integrated. This method can minimise the component. count., and improve the system efficiency greatly, based on earlier works by Han et a1. (1996, 1994). The system software has an open architecture to permit convenient modification by the user, to fit their specific purposes. Some variable system control parameters can be selected by a user with a wider range of choice. The digital controller design concept allows great flexibility of system parameters by the software, specifically for the compatibility to deal with any number of mixed CCDs, and in any format, within the practical limit.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.784-793
• /
• 2016

We present a single shot low coherence white light Hilbert phase microscopy (WL-HPM) for quantitative phase imaging of Si optoelectronic devices, i.e., Si integrated circuits (Si-ICs) and Si solar cells. White light interferograms were recorded by a color CCD camera and the interferogram is decomposed into the three colors red, green and blue. Spatial carrier frequency of the WL interferogram was increased sufficiently by means of introducing a tilt in the interferometer. Hilbert transform fringe analysis was used to reconstruct the phase map for red, green and blue colors from the single interferogram. 3D step height map of Si-ICs and Si solar cells was reconstructed at multiple wavelengths from a single interferogram. Experimental results were compared with Atomic Force Microscopy and they were found to be close to each other. The present technique is non-contact, full-field and fast for the determination of surface roughness variation and morphological features of the objects at multiple wavelengths.