• 한국인쇄학회지
• /
• 제30권1호
• /
• pp.47-58
• /
• 2012

The inorganic powder EL lamp was made by screen printing technique with a phosphor ink and a dielectric ink. Value of color coordinates X and Y increased under the condition of supplying driving power to the inorganic powder EL lamp and changing voltage with constant frequency. When frequency was changed under the constant voltage, value of color coordinates X and Y were decreased with increasing frequency. However, level of change of color coordinates X was different from color coordinates Y. When voltage was increased under constant frequency, changing degree of color coordinates X and Y shows similarity. But under the constant voltage with changing frequency, color coordinates X and Y were differently changed that degree of change of color coordinates Y showed five times more than that of color coordinates X. As increasing thickness of phosphor ink and dielectric ink, level of voltage and frequency, color coordinates X and Y were slightly changed. According to the thickness of phosphor ink and dielectric ink, and level of voltage and frequency, color coordinate of color light was changed. Frequency was most important element influencing on the change of color coordinate.

• 한국분말재료학회지
• /
• 제5권3호
• /
• pp.199-209
• /
• 1998

A new low melting inorganic binder, monoclinic $HBO_2$, has been developed for Selective Laser Sintering (SLS) of alumina powder by dehydration process of boron oxide powder in a vacuum oven at $120^{\circ}C$. It led to better green SLS parts and higher bend strength far green and fired parts compared to other inorganic binders such as aluminum and ammmonium phosphate. This appeared to be due to its low viscosity and better wettability of the alumina particle surface. A low density single phase ceramic, aluminum borate ($Al_{18}B_4O_{33}$), and multiphase ceramic composites, $A_{12}O_3-A_{14}B_2O_9$, were successfully developed by laser processing of alumina-monoclinic $HBO_2$ powder blends followed by post-thermal processing; both $Al_{18}B_4O_{33}$ and $A_{14}B_2O_9$ have whisker-like grains. The physical and mechanical properties of these SLS-processed ceramic parts were correlated to the materials and processing parameters. Further densification of the $A_{12}O_3-A_{14}B_2O_9$ ceramic composites was carried out by infiltration of colloidal silica, and chromic acid into these porous SLS parts followed by heat-treatment at high temperature ($1600^{\circ}C$). The densities obtained after infiltration and subsequent firing were between 75 and 80% of the theoretical densities. The bend strengths are between 15 and 33 MPa.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.609-616
• /
• 2021

본 연구에서는 금속염계 무기물인 발수분말과 포졸란계 재료인 천연제올라이트 분말을 사용하여 시멘트 모르타르에 혼입하고 물리적 특성 및 수분에 대한 저항성을 확인하였다. 무기물 금속염계 발수분말을 단독으로 혼입한 시험체에 비해서 천연제올라이트를 동시에 사용한 시험체에서 수분침투실험 및 그에 수반하는 염화물 침투시험에서 높은 저항성을 갖는 것을 확인 할 수 있었다. 금속염계 발수분말을 사용하는 경우 불용성으로 인하여 수분침투저항성이 내부에서 고르게 분산되지 못하고 표면에 국한되었으며 천연제올라이트와 동시에 사용하는 경우 포졸란 반응으로 인해 수화초기의 응결시간이 빠르고 또한 천연제올라이트의 다공성 내부에 발수분말이 부착되어 내부에서도 수분저항성이 일부 생성된 것으로 판단된다.

• 대한화장품학회지
• /
• 제49권3호
• /
• pp.247-258
• /
• 2023

본 연구는 덱스트린팔미테이트와 아이소프로필티타늄트라이아이소스테아레이트 코팅 기재를 티타늄다이이옥사이드에 복합화하여 내수성 향상과 피부와의 밀착력 개선에 관한 것이다. 최근 야외 활동을 즐기는 소비자의 증가로 내수성이 우수한 자외선 차단제에 대한 수요가 늘고 있다. O/W, 피커링, W/O/W 멀티플 제형으로 선행 연구가 진행되었으나, 내수성에 한계가 있었다. 본 연구에서는 이러한 문제를 해결하기 위해 내수성 향상 및 피부와의 밀착력을 높일 수 있는 복합 무기 분체를 개발하는 것이 목적이다. 우선 덱스트린팔미테이트와 아이소프로필티타늄트라이아이소스테아레이트 코팅 기재를 이용하여 티타늄다이옥사이드를 복합화시켰다. 무기 분체의 코팅은 FE-SEM과 FT-IR을 이용하여 확인하였다. 복합체의 in vitro내수성은 월등히 높았다. 코팅된 무기 분체의 소수성은 접촉각을 측정하여 비교하였다. 코팅된 무기 분체를 W/O 선크림 제형에 적용하고 대조군으로 코팅되지 않은 무기 분체를 W/O 선크림 제형에 적용했을 때 코팅된 무기 분체가 들어있는 선크림의 SPF가 더 크게 나타났다. 이러한 결과는 UV 카메라로 관찰했을 때도 같은 결과를 나타냈다. 마지막으로 코팅된 무기 분체의 피부 밀착력은 파운데이션 제품에 적용하여 확인하였다. In vivo연구에서 코팅되지 않은 무기 분체를 사용한 파운데이션 제품보다도 코팅된 무기 분체를 적용한 제품에서 묻어남이 적게 나타났다. 본 연구를 통해 개발된 무기 분체는 피부와의 밀착력이 우수한 사용감과 소수성이 향상된 뛰어난 내수성 효과를 보여주었다. 향후 본 연구는 내수성 향상을 위한 다양한 자외선 차단제 제품 개발에 도움이 될 것으로 기대된다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.151-163
• /
• 2000

A polymerized organic-inorganic complexation route is introduced for the synthesis of oxide ceramic powders. Polyvinyl alcohol was used as the organic carrier for precursor ceramic gel. Porous and soft powders, which have a high specific surface area, were obtained after calcinating the aerated precursors. The PVA content and its degree of polymerization had a significant influence on the homogeneity of the final powder. In particular, attrition milling process with the porous powder resulted in ultra-fine particles. In the case of the preparation of cordierite powder, nano-size powder, which has a high specific surface area of 181 ㎡/g, was obtained by the milling process. The complexation route was also applied to the synthesis of unstable phase in room temperature like beta-cristobalite, high temperature form of silica.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.259-262
• /
• 2012

Recently, as the national policy of green growth is promoted, construction field also makes an effort to reduce CO₂ gas released when producing cement continuously. In other words, as the method solving environmental pollution and resources exhaustion, lots of mineral material compounds such as blast furnace slag powder which is industrial by-product, fly ash, red mud, etc. are examined to bo used as the substitute good of cement Therefore this study is to investigate the hardening characteristics of alumino-silicate inorganic binder using red-mud used as a accelerator of industrial by-product such as fly ash and blast furnace slag powder according to curing temperature. As a result, it is effective to use red-mud as the accelerator of inorganic binder with other additory accelerators.

• 한국결정성장학회지
• /
• 제4권4호
• /
• pp.336-346
• /
• 1994

용융 silicon과 carbon 입자가 어떠한 반응관계를 나타내는가를 알아보기 위하여 sili-con만으로 된 powder와 silicon에 carbon을 0.2wt%의 비율로 혼합한 powder와 silicon에 carbon을 0.2wt%의 비율로 혼합한 powder를 silicon의 용융점 이사의 고온인 $1450^{\circ}C, 1550^{\circ}C, 1650^{\circ}C, 1700^{\circ}C$에서 각각 1시간, 4시간을 유지시킨 다음 quenching시켜 각각의 조건에 따른 반응의 정도 및 상의 분포와 morphology의 분석을 통해 melt sili-con의 morphology 변화,carbon이 함유된 silicon의 조건에 따른 물성변화 및 SiC의 형성여부를 조사하기 위하여 광학현미경과 SEM, XRD등을 이용하여 시편의 미세구조 및 결정화 양상을 관찰하였다. 용융점 이상의 온도에서 quartz는 연화하여 분해반응을 일으켜 산소를 내놓고 이것이 silicon과 결합하여 SiO로써 기체상태로 휘발하게 되어 silicon melt에 산소침투로 인항 표면결함을 형성하며, liquid silicon속에 용융되어 있던 carbonrhk 불순물로써 grain boundary를 따라 존재 하고 있는 미반응의 carbon이 용융상태 silicon과 반응하여 SiC를 형성한다. SiC 결정은 고화계 면에서 발생하게 되며 생성되는 결정은 ${\alpha}-SiC$이었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.181-182
• /
• 2007

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.854-860
• /
• 1997

The tribological property of ceramics is very important for use in seal rings, pump parts, thread guides and mechanical seal, etc. In the present study, which RBSC/graphite composites were manufactured by adding graphite powders with different particle sizes to mixtures of SiC powder, metallic silicon, carbon black and alumina, effects on the tribological property of each RBSC/graphite composite was investigated in accordance with the particle size of the added graphite powder. The water absorption, the bending strength and the resistance for the friction and wear were measured, and the crystalline phase and the microstructure were respectively examined by using XRD and SEM. In case that the particle size of the graphite powder was fine(2${\mu}{\textrm}{m}$), the formation of $\beta$-SiC was accelerated, thereby making the increase of the bending strength and the decrease of the water absorption, but no improvement for the tribological properties. Furthermore, in case that the particle size of the graphite powder was some large(88~149${\mu}{\textrm}{m}$), the formation of $\beta$-SiC was not accelerated, to thereby make the decrease of the bending strength and the increase of the water absorption, but the improvement for the tribological property of only the composite having the graphite powder of 20 vol%. In addition, in case that the particle size distribution of the graphite powder was large (under 53 ${\mu}{\textrm}{m}$), there was no improvement for every properties. However, the composites, which the graphite powder with the particle size of 53~88 ${\mu}{\textrm}{m}$ was added in 10~15 vol%, had the most increased resistance for the friction and wear which show the worn out amount of 0.4~0.6$\times$10-3 $\textrm{cm}^2$, and the value of the bending strength is 380~520 kg/$\textrm{cm}^2$.

• 한국분말재료학회지
• /
• 제31권2호
• /
• pp.126-131
• /
• 2024

The aim of this study was to improve the chemical stability of cycloserine containing organic and inorganic compounds. Composite particles were manufactured with a 1:1 weight ratio of organic/inorganic compounds and cycloserine. The influence of organic/inorganic compounds on the stability of cycloserine was investigated under accelerated stress conditions at 60℃/75% RH for 24 hours. In addition, the properties of the composite particles were evaluated using differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and the dissolution of the drug was assessed by preparing it as a hard capsule. Among the organic and inorganic compounds investigated, calcium hydroxide most improved the stability of cycloserine under accelerated stress conditions (53.3 ± 2.2% vs 1.7 ± 0.2%). DSC results confirmed the compatibility between calcium hydroxide and the cycloserine, and SEM results confirmed that it was evenly distributed around the cycloserine. Calcium hydroxide also showed more than 90% cycloserine dissolution within 15 minutes. Therefore, the calcium hydroxide and cycloserine composite particles may be candidates for cycloserine oral pharmaceuticals with enhanced drug stability.