• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.37-45
• /
• 2018

An electric vehicle is an environmentally friendly vehicle because there is no exhaust gas, unlike gasoline automobiles. On the other hand, because the electric vehicle is driven by electric power charged in batteries, the distance to go through a single charge depends on the energy density of the batteries. Therefore, a lithium-ion battery with a high energy density is a good candidate for batteries in electric vehicles. Because the electrode is an essential component that governs the efficiency of a lithium-ion battery, the electrode manufacturing process plays a vital role in the entire production process of lithium-ion batteries. In particular, the drying process during the electrode manufacturing process is a critical process that has a significant influence on the performance. This paper proposes an innovative process for improving the efficiency and productivity of the drying process in electrode manufacturing and describe the equipment design method and development results. In particular, the design procedure and development method for enhancing the electrode adhesion power, atmospheric pressure superheated steam drying technology, and drying furnace slimming technologies are presented. As a result, high-speed drying technology was developed for battery electrodes through the world's first turbo dryer technology for mass production using open/integrated atmospheric pressure superheated steam. Compared to the conventional drying process, the drying furnace improved the productivity (Dry Lead Time $0.7min{\rightarrow}0.5min$).

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.143-154
• /
• 2012

The wireless low-floored tram is an innovative transportation system which is environment-friendly and highly energy-efficient. In addition, the system has various advantages such as low construction cost, improvement of urban landscape, revitalization of surrounding commercial area, elevated convenience for passengers, etc. Therefore, more than ten local governments have proposed tram construction projects in Korea. Accordingly, many research and development projects are ongoing funded by government including the developments of tram vehicle, tram trackway, signal system, etc. The embedded rail system are commonly used in order to provide leveled roadway surface in urban area. It is effective to reduce the noise and vibration, caused at the interface between the wheel and track, to minimize the construction period, and to lower the maintenance cost. This paper investigated the design and construction processes for tram trackway and figured out the constructability for the test track with embedded rail system for the first time in Korea. The performance to reduce the noise and vibration were quantitatively measured in the test track with embedded rail system. In addition, the results were compared to the ones for track with conventional rail system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.361-371
• /
• 2012

In order to improve the efficiency of the branch-and-bound method for mixed-discrete nonlinear programming, a nonuniform convergence tolerance scheme is proposed for the continuous subproblem optimizations. The suggested scheme assigns the convergence tolerances for each continuous subproblem optimization according to the maximum constraint violation obtained from the first iteration of each subproblem optimization in order to reduce the total number of function evaluations needed to reach the discrete optimal solution. The proposed tolerance scheme is integrated with five branching order options. The comparative performance test results using the ten combinations of the five branching orders and two convergence tolerance schemes show that the suggested non-uniform convergence tolerance scheme is obviously superior to the uniform one. The results also show that the branching order option using the minimum clearance difference method performed best among the five branching order options. Therefore, we recommend using the "minimum clearance difference method" for branching and the "non-uniform convergence tolerance scheme" for solving discrete optimization problems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.146-147
• /
• 2011

Processing a large area substrate for liquid crystal display (LCD) or solar panel applications in a capacitively coupled plasma (CCP) reactor is becoming increasingly challenging because of the size of the substrate size is no longer negligible compared to the wavelength of the applied radio frequency (RF) power. The situation is even worse when the driving frequency is increased to the Very High Frequency (VHF) range. When the substrate size is still smaller than 1/8 of the wavelength, one can obtain reasonably uniform process results by utilizing with methods such as tailoring the precursor gas distribution by adjustingthrough shower head hole distribution or hole size modification, locally adjusting the distance between the substrate and the electrode, and shaping shower head holes to modulate the hollow cathode effect modifying theand plasma density distribution by shaping shower head holes to adjust the follow cathode effect. At higher frequencies, such as 40 MHz for Gen 8.5 (2.2 m${\times}$2.6 m substrate), these methods are not effective, because the substrate is large enough that first node of the standing wave appears within the substrate. In such a case, the plasma discharge cannot be sustained at the node and results in an extremely non-uniform process. At Applied Materials, we have studied several methods of modifying the standing wave pattern to adjusting improve process non-uniformity for a Gen 8.5 size CCP reactor operating in the VHF range. First, we used magnetic materials (ferrite) to modify wave propagation. We placed ferrite blocks along two opposing edges of the powered electrode. This changes the boundary condition for electro-magnetic waves, and as a result, the standing wave pattern is significantly stretched towards the ferrite lined edges. In conjunction with a phase modulation technique, we have seen improvement in process uniformity. Another method involves feeding 40 MHz from four feed points near the four corners of the electrode. The phase between each feed points are dynamically adjusted to modify the resulting interference pattern, which in turn modulate the plasma distribution in time and affect the process uniformity. We achieved process uniformity of <20% with this method. A third method involves using two frequencies. In this case 40 MHz is used in a supplementary manner to improve the performance of 13 MHz process. Even at 13 MHz, the RF electric field falls off around the corners and edges on a Gen 8.5 substrate. Although, the conventional methods mentioned above improve the uniformity, they have limitations, and they cannot compensate especially as the applied power is increased, which causes the wavelength becomes shorter. 40 MHz is used to overcome such limitations. 13 MHz is applied at the center, and 40 MHz at the four corners. By modulating the interference between the signals from the four feed points, we found that 40 MHz power is preferentially channeled towards the edges and corners. We will discuss an innovative method of controlling 40 MHz to achieve this effect.

• Journal of Internet Computing and Services
• /
• v.20 no.6
• /
• pp.105-117
• /
• 2019

Bitcoin, which can be classified as a cryptocurrency, has attracted attention from various industries because it is an innovative digital currency and the beginning of a Blockchain system. However, as the research on Bitcoin progressed, several security vulnerabilities and possible attacks were analyzed. Among them, the security problem caused by the transparency of the Blockchain database prevents the Blockchain system from being applied to various fields. This vulnerability is further classified as the weak anonymity of participating nodes and privacy problem due to disclosure of transaction details. In recent years, several countermeasures have been developed against these vulnerabilities. In this paper, we first describe the main features of the public and private Blockchain, and explain privacy, unlinkability and anonymity. And, three public Blockchain platforms, Dash, Zcash and Monero which are derived from Bitcoin, and Hyperledger Fabric which is a private Blockchain platform, are examined. And we analyze the operating principles of the protocols applied on each platform. In addition, we classify the applied technologies into anonymity and privacy protection in detail, analyze the advantages and disadvantages, and compare the features and relative performance of the platforms based on the computational speed of the applied cryptographic mechanisms.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.384-392
• /
• 2011

Recruitment and selection are separate but mutually reinforcing processes. The goal of recruitment is to attract the largest number of applicants possible to apply to the agency, and selection is the process of weeding out unqualified candidates and identifying qualified candidates. In this context, the recruitment and selection system of police officials is an important issue because it affects their future performance as police officers on the job, especially their policing skills, perception of society, occupational ethics. This study suggested the characteristics of U. S. recruitment and selection system of police officials. In the U. S, each police agency sets up its own recruitment and selection standards and procedures. However, recruitment and selection process follows a certain sequence : receiving application, psychological examination, background check, polygraph test, drug screening, interview, physical agility, and medical test. Special characteristic of American police system regarding recruitment and selection is that many law enforcement agencies use a polygraph test to ensure the integrity of the candidates. Another interesting screening process is a drug test because many Americans abuse illegal drugs. A candidate officer must submit urine or a hair sample for screening test. Police human resources specialists should continually identify the most innovative tests and approaches recruit and select police officers. Recruitment and selection strategies should increasingly attract and retain those officers who have the attributes to work in a community-oriented policing environment.

• International Commerce and Information Review
• /
• v.15 no.4
• /
• pp.341-366
• /
• 2013

The term, Mittelstand, has no exact english translation for the definition, but, today, Mittelstand refers to small and medium-sized enterprises(SME), mostly family-owned firms in Germany. The Mittelstand is called the backbone of the German economy because it drove the economic miracle after World War II. During the global recession and the euro zone's debt crisis in recent years, in which european businesses have faced the near-collapse of competitiveness particularly in manufacturing, the German exports are booming and exceeded exports of China in 2012. Most importantly, the Germany economic performance has been widely attributed to the strength of the Mittelstand. Many of countries, even some leading public companies are seeking to emulate the success of the Mittelstand. Investors evaluate that many of Germany's investable "hidden champions" are Mittelstand companies. The purpose of this study is to present some of answers to the following questions: Firstly, what makes the German Mittelstand so successful? Secondly, what does the success of the German Mittelstand mean for the Korean SMEs in global competitiveness? Thirdly, what Korean government has to do improve the global competitiveness of the Korean SMEs? Some discussions in this study mention the managerial implications for Korean exporting SMEs particularly in manufacturing. Several factors that account for the success of the German Mittelstand are technological excellence and the tradition of family-owned management, concentration on niche market and globalization, and institutional supports. There are some of important lessons to be learned from the German Mittelstand. If the purposes of Korean SMEs want to remain in the sustainable competitive advantage and withstand unforeseen economic turbulences in the future, they must be able to meet the followings: 1) Technology that meets the global standard or exceeding it 2) Competitiveness in price in the global market 3) Active involvement in the globalization process, utilizing various entry modes Innovative products at globally competitive price are a crucial point for Korean exporting SMEs to achieve their competitive edge over others in the target markets abroad. It is time for Korean SMEs to cultivate a core competence in manufacturing in order to position Korea as a global manufacturing hub with SMEs leading.

• Journal of the Korean Chemical Society
• /
• v.60 no.1
• /
• pp.69-81
• /
• 2016

The purpose of this study was to find out the validation of instructional strategies using the Advanced Laboratory Equipment (ALE class) by investigating science high school students’ perception on ALE in chemistry classrooms and to consider the need for development of teaching materials on ALE class. 7 sessions of ALE including experiments with innovative equipment were developed and applied to 21 students in D Science High School. At the end of the sessions, questionnaire was given to the students. We also collected qualitative data by interviewing 9 students who participated in the questionnaire. We analyzed the data collected by In-depth interviews and students’ experimental reports. The result showed that ALE class was effective to enhance students’ understanding of learning concepts because the experimental time was shortened in real time data processing. Some students showed creative performance on solving scientific problems by using everyday materials in experimental process and developed perceptions of practical inquiry. Through this process, students’ positive attitudes and interests in science and heuristic inquiry skills were also enhanced. Developing ALE lesson materials will be helpful for students to understand science and technology and the domain of science in broader contexts.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.285-292
• /
• 2012

Fixed connection is generally used for beam and column connections of concrete structures, but significant damages at the connection due to severe earthquakes have been reported. In order to reduce damages of the connection and improve seismic performance of the connection, several innovative connections have been suggested. One newly proposed connection type allows a rotation of the connection for applications in rotating or rocking beams, columns, and shear walls. Such structural elements would provide a nonlinear lateral force-displacement response since their contact depth developed during rotation is gradually reduced and the stress across the sections of the elements is non-linearly distributed around a contact area, which is called an elastic hinge region in the present study. The purpose of the present study is to define the elastic hinge region or length for the rocking columns, through investigating the cross-sectional stress distribution during their lateral behavior. Performing a finite element analysis (FEA), several parameters are considered including axial load levels (5% and 10% of nominal strength), different boundary conditions (confined-ends and cantilever types), and slenderness ratios (length/depth = 5, 7, 10). The FEA results showed that the elastic hinge length does not directly depend on the parameters considered, but it is governed by a contact depth only. The elastic hinge length started to develop after an opening state and increased non-linearly until a rocking point(pre-rocking). However, the length did not increase any more after the rocking point (post-rocking) and remained as a constant value. Half space model predicting the elastic hinge length is adapted and the results are compared with the numerical results.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.1
• /
• pp.88-100
• /
• 2010

As the competition between companies are deepened, the number of companies adopting six sigma principles, which is one of the innovative management strategies, are increasing. According to this trend, the changes in both strategies and methodologies of six sigma are continuous. However, the evaluations and the management principles included in the process after the six sigma applications are insufficient, and the cooperation between the parties in the company is also not enough because the application process of six sigma is too complex and not efficient. In order to solve this problem, a research for developing the methodology which can learn about and do six sigma applications is so necessary, specifically for expanding the six sigma applications and introducing the participation of all company members. The purpose of this study, therefore, was to develop and present more efficient Six Sigma applied process by reducing the existing unnecessary steps in improvement one, by applying the examination method of wasteful elements on the potential factors, through analyzing the Six Sigma DMAIC applied case in the construction industry. The result of those application showed that the detection of potential factors using wasting elements was possible in measurement step and that it was possible for the improved process with reduced steps compared to existing process while to remain the outcomes. It is considered that the performance rate of Six Sigma project will be improved significantly because the reduction in the improvement step does not affect the improvement effect within the whole Six Sigma project.