• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.497-502
• /
• 2010

The accurate estimation of position and direction of the mobile robot is essential for preparing precise movement and works in the inner complex environment. In this paper, we propose a robust estimation method of location and direction using the velocity of mobile robot in the inner GPS environment. The estimation using the inner GPS with ultrasonic sensors have to consider with various acoustic noise and sensor errors. We design a robust estimation method using a membership function based on uncertainty of the obtained information and robot velocity. The simulation results of the proposed method show effectiveness in the contaminated environment with position errors.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.3
• /
• pp.213-221
• /
• 2005

In order to get more accurate GPS position with the changes of the inner configuration setting of GPS receiver, the authors carried out measurements of the position at known it with one antenna and two GPS receivers manufactured by same company. We have investigated the accuracies of positions according to the change of the maskangle and receiving mode of output data in inner configuration of GPS receivers, and analyzed the relationships between numbers of satellites visibility and maskangles, and values of HDOP and maskangles. When the maskangles in inner configuration were set below 20 degree, the accuracies of positions were high. But if they were became bigger than 25 degree, standard deviations ot position errors and HDOPS of positions were became bigger. Numbers of satellites visibility(y) and maskangles(x) have relations with a formula, y = -0.1662x+9.9225, and values of HDOP(y) and maskangles(x) have relations with a formula, y = 0.6035 $e^{0.0517x}$. The results of position accuracies observed by two GPS receivers to the known position at same time were that average errors of position fixs by GPS receiver configured with NMEA0183 mode were 6.7m and standard deviations were 1.5m, and them by GPS receiver configured with binary mode were 5.0m and standard deviations were 1.1m respectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.273-278
• /
• 2006

In order to use a GPS antenna for launch vehicles, it should be installed on the skin of the vehicle and be able to normally receive the live GPS signals during the vehicle's full flight mission. The GPS antenna on the surface of the launch vehicle is, however, exposed to higher temperature than inner equipments of the vehicle due to aerodynamic heating generated during the flight. Test specification of the GPS antenna for qualification of hot-temperature is determined to $+95^{\circ}C$ that is higher than inner components by $25^{\circ}C$. Test results in this paper show that the GPS antenna normally operates under the above environment.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.157-164
• /
• 2007

For a GPS antenna to normally receive GPS satellite signals during full flight mission of a satellite launch vehicle, it should be installed on skin of the vehicle. The surface of a launch vehicle is drastically heated up due to aerodynamic heating effect during flight, so that the GPS antenna mounted on surface of the launch vehicle is directly exposed to extremely hot temperature environment. Hot temperature test specification of the GPS antenna, therefore, is severer than inner components. This paper describes that procedures and results of performance analysis of the GPS antenna for KSLV-I under hot temperature environment. The GPS antenna was not deformed physically and inner LNA(Low Noise Amplifier) operated normally without performance degradation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2853-2858
• /
• 2013

This paper proposes the ITMS(Intelligent Transport Monitoring System) which manages the route and state of freight by using the Meteorological Office, the Transportation Management Center, GPS and Sensors, etc. The ITMS consists of the CIMS(Container Inner Monitoring System) transmitting the inner temperature and humidity of a container, the TMM(Transport Management Module) computing an estimated time of arrival with Freight Vehicle location information and transmits the result to the CIMS, the FMM(Freight Management Module) checking and managing the freight freshness by using the temperature and humidity of the collected containers, and the SMM(Stevedoring Management Module) selecting the container loading and unloading places with the information transmitted from the CIMS, the TMM, and the FMM and attaching the freight formation to containers using an RFID label. The ITMS not only checks the freight condition at intervals but also acquires and manages the freight information with RFID labels rapidly and accurately.

• Korean Journal of Artificial Intelligence
• /
• v.12 no.3
• /
• pp.9-15
• /
• 2024

This paper addresses the critical need for quadcopters in GPS-denied indoor environments by proposing a novel attitude control mechanism that enables autonomous navigation without external guidance. Utilizing AR marker detection integrated with a dual PID controller algorithm, this system ensures accurate maneuvering and positioning of the quadcopter by compensating for the absence of GPS, a common limitation in indoor settings. This capability is paramount in environments where traditional navigation aids are ineffective, necessitating the use of quadcopters equipped with advanced sensors and control systems. The actual position and location of the quadcopter is achieved by AR marker detection technique with the image processing system. Moreover, in order to enhance the reliability of the attitude PID control, the dual closed loop control feedback PID control with dual update periods is suggested. With AR marker detection technique and autonomous attitude control, the proposed quadcopter system decreases the need of additional sensor and manual manipulation. The experimental results are demonstrated that the quadrotor's autonomous attitude control and operation with the dual closed loop control feedback PID controller with hierarchical (inner-loop and outer-loop) command update period is successfully performed under the non-GPS aided indoor environment and it enhanced the reliability of the attitude and the position PID controllers within 17 seconds. Therefore, it is concluded that the proposed attitude control mechanism is very suitable to GPS-denied indoor environments, which enables a quadcopter to autonomously navigate and hover without external guidance or control.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.1 s.6
• /
• pp.89-95
• /
• 2005

In this paper, a quad-band antenna for GSM/GPS/DCS/US-PCS handsets is proposed. The proposed antenna is low-profile for mounting in limited inner space of a handset. It consists of three open points with quarter wave length for multi-band operation. The ground plane below the patch is removed for wide-bandwidth without the variation of antenna size and the slot is added at the center of the patch for convenient matching in high frequency band. It provides a enough bandwidth within VSWR 3:1 at all bands. In addition, the measured peak gains are between -2.19 and 2.09 in anechoic chamber (10m$\times$6m$\times$4m).

• Journal of Korea Multimedia Society
• /
• v.23 no.2
• /
• pp.282-292
• /
• 2020

In order to minimize casualties from marine vessel accidents that occur frequently at home and abroad, it is important to ensure the safety of the passengers aboard the vessel in the event of an accident. There is an EPIRB system as a system for disaster preparedness in the marine situation currently on the market, but there is a problem that the price is very expensive. In order to overcome the cost problem, which is a disadvantage of previous system, LoRaWAN-based communication is used. LoRaWAN communication-based vessel positioning and risk detection system based on LoRaWAN communication transmits measurement data of each module using two Beacon and GPS modules to stably perform position measurement for both indoor and outdoor situations. The rider danger situation detection system can detect the safety status of the rider using the 3-axis acceleration sensor, collect data from the rider positioning system and the rider safety status detection system, and send to server using LoRa communication. When conducting communication experiments in the long-distance maritime situation and actual communication experiments using the implemented system, it was found that the two experiments showed over 90% communication success rate on average.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.933-939
• /
• 2010

In this paper, modified spiral monopole printed antenna for dual band operation in GPS(1.57~1.577 GHz) and WiBro(2.3~2.4 GHz), WLAN(2.4~2.48 GHz) is proposed. To control the frequency ratio of the antenna for dual band operation freely, distance between inner lines of the spiral is diversified by using the different current distribution between basic resonance frequency of spiral monopole antenna and harmonic resonance frequency$(3\lambda_H/4)$. And also the branch line is inserted. Bandwidth(-10 dB) of the antenna is measured 140 MHz(1.47~1.61 GHz) in basic resonance frequency and 420 MHz(2.29~2.71 GHz) in harmonic resonance frequency$(3\lambda_H/4)$. The peak antenna gains are measured 2.825 dBi in GPS(1.57 GHz), and 3.65 dBi in WiBro(2.35 GHz), and 4.564 dBi in WLAN(2.44 GHz).

• Journal of Environmental Science International
• /
• v.23 no.11
• /
• pp.1801-1805
• /
• 2014

Longshore current is main transportation mean causing movement of bed load and suspended particle in coastal waters, and effective measurement method and suitable equipment for shallow water coastal environment where is frequently exposed to atmosphere. Measurement equipment for longshore drift was designed and miniature model was applied to Gyeongpo beach in May and June, 2014. The equipment consists of three main elements, spheroid outer casing, spheroid inner casing, observation module equipped with GPS. Gyroscope principle was applied to observation module, and GPS receiver always can be directed upwards. Miniature models were installed along Gyeonpo beach, and it was well to track the flow of longshore current. This research described the design and function of the equipment and results of field experiments.