• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.488-493
• /
• 2005

In gun stabilization systems, the torque comes from the unbalance mass of gun and the base acceleration is an important source of disturbance which degrades stabilization performance. Fatigue of gear train is another important factor affecting structural safety problems. In this paper, a feedback control gain is designed by optimal control weighting to difference between motor and gun velocity, and a feedforward controller using FXLMS algorithm is adopted to investigate those problems. Experimental results show that the feedforward compensator based on FXLMS can reduce the disturbance effects. The directional convergence property according to initial conditions of the FXLMS is also shown through experiments.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1735_1736
• /
• 2009

This paper discusses about a robust servo system applying PID control to PMSM. The system has robustness by Sliding Mode Controller. A novel sliding surface is defined by virtual state. This sliding surface has nominal dynamics of an original PID control system. So Sliding Mode Control(SMC) technique can be used with PID controller. Its design is based on the augmented system whose dynamics have a higher order than that of the original system. The reaching phase is removed by using an initial virtual state whitch makes the initial sliding function equal to zero.

• Journal of Mechanical Science and Technology
• /
• 제15권10호
• /
• pp.1356-1368
• /
• 2001

In this paper, the model reference adaptive control (MRAC) of a flexible structure is investigated. Any mechanically flexible structure is inherently distributed parameter in nature, so that its dynamics are described by a partial, rather than ordinary, differential equation. The MRAC problem is formulated as an initial value problem of coupled partial and ordinary differential equations in weak form. The well-posedness of the initial value problem is proved. The control law is derived by using the Lyapunov redesign method on an infinite dimensional filbert space. Uniform asymptotic stability of the closed loop system is established, and asymptotic tracking, i. e., convergence of the state-error to zero, is obtained. With an additional persistence of excitation condition for the reference model, parameter-error convergence to zero is also shown. Numerical simulations are provided.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.325-328
• /
• 2000

The effects of DO and pH on the mass production of pullulan with high-molecular weight from A. pullulans ATCC 42023 were evaluated. The maximum pullulan production yield (51%) was obtained at pH non control (initial pH 6.5) and DO control (above 50%) condition. The pullulan degrading enzyme was activated when the pH of broth reached lower than 5.0 and portion of low molecular weight pullulan was increased. The formation of a black pigment was observed at the initial stationary phase, 40hr of fermentation. Therefore, the fermentation should be carried out in pH non control and DO control condition and harvested before reaching stationary phase around 40h for the production of high molecular weight pullulan.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• 제34S권11호
• /
• pp.53-62
• /
• 1997

In this study, a controller design method is proposed for controlling the discrete-time chaotic systems efficiently. The proposed control method is based on Generalized Predictive Control and uses NARMAX models as controlled models. In order to evaluate the performance of the proposed method, a proposed controller is applied to discrete-time chaotic systems, and then the control performance and initial sensitivity of the proposed controller are compared with those of the conventional model-based controler through computer simulations. Through simulations results, it is shown that the control performance of the proposed controller is superior to that of the conventional model-based controller and shown that the peorposed controller is less sensitive to initial values of discrete-time chaotic systems in comparison with the conventional model-based controller.

• Korean Journal of Computational Design and Engineering
• /
• 제3권2호
• /
• pp.87-102
• /
• 1998

Given a sequence of cross-sectional curves, the skinning method generates a freeform surface that interpolates the given curves in that sequence. This thesis presents a construction method of a B-spline skinning surface that is fair and satisfies volume constraints. The fairness metric is based on the parametric energy functional of a surface. The degrees of freedom in surface control are closely related lo control points in the skinning direction. The algorithm fur finding a skinning surface consists of two step. In the first step, an initial fair surface is generated without volume constraints and one coordinate of each control point is fixed. In the second step, a final surface that meets all constraints is constucted by rearranging the other coordinates of each control point that defines the initial surface A variational Lagrange optimization method produces a system of nonlinear equations, which can be solved numerically. Moreover, the reparametrization of given sectional curves is important for the construction of a reasonable skinning surface. This thesis also presents an intuitive metric for reparametrization and gives some examples that are optimized with respect to that metric.

• Journal of the East Asian Society of Dietary Life
• /
• 제7권1호
• /
• pp.65-70
• /
• 1997

To investigate the food preservative effects of leaf mustard Dolsan(Brassica juncea), the pretreated extract of leaf mustard Dolsan were added to Kimchi and the results are as following. pH of Kimchi added leaf mustard Dolsan extracts were lower than that of control at initial stage, but after 6 days of fermentation, pH was higher in order of Kimchi added the pretreated extract of leaf mustard Dolsan (hydrolyzed at 3$0^{\circ}C$ for 24 hours, PEM), the unpretreated extract of leaf mustard Dolsan(UEM) and control. The total number of bacteria and lactic acid bacteria increased rapidly at the initial stage of fermentation and reached plateau at 2 days of fermentation. The number of bacteria and lactic acid bacteria of Kimchi added leaf mustard Dolsan extracts were lower than that of control ,a and antimicrobial activity of PEM in Kimchi was higher than that of UEM. After 2 days fermentation, sensery value of Kimchi added PEM was more excellent than that of control.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제22권4호
• /
• pp.145-151
• /
• 2014

Modern vehicle has a lot of ECU(Electronic Control Unit) products to control many parts such as engine, transmission, brake, body and so on. ECU quality is one of important factors related to vehicle quality and driver's safety. Based on Bath-tub curve which presents failure rate during product lifetime, we designed and applied Accelerated Run-in Test into manufacturing line by simulating stress amount to ECU and developing the required software and efficient test equipment for mass production. This test makes ECU products stressed through electrical and thermal stresses under excessive driving condition, which induce potential initial failure of components in the ECU during production. The outcome until these days proved that Acceleration Run-in Test have reduced initial failure rates and increased quality of ECU products in the field outstandingly.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.258-258
• /
• 2000

In this paper, we present the position control of pendulum system which is driven by a ultrasonic motor. Since the system's response is different for each initial position of pendulum, it is difficult to obtain the satisfiable control performance by using a neural network which is learned by off-line. To overcome this problem, we propose the multiple controller based on fuzzy inference system for ultrasonic motor. and controller is designed by neural network. The proposed method shows good performance for any initial positions and it's effectiveness is verified from experiments. We expect that ultrasonic motor can be used as actuators of robot's leg or manipulator.

• Journal of the Korean Society of Industry Convergence
• /
• 제23권1호
• /
• pp.49-55
• /
• 2020

This paper presents the system modeling, analysis, and controller design and implementation with a inverted pendulum system in order to test Linear Quadratic control based robust algorithm for inverted pendulum robot. The balancing of an inverted pendulum robot by moving pendulum robot like as 'segway' along a horizontal track is a classic problem in the area of control. This paper will describe two methods to swing a pendulum attached to a cart from an initial downwards position to an upright position and maintain that state. The results of real experiment show that the proposed control system has superior performance for following a reference command at certain initial conditions.