• 한국재료학회지
• /
• 제11권5호
• /
• pp.354-360
• /
• 2001

본 연구에서는 탄성문제에 관한 Eshelby의 이론을 응용하여 다수의 개재물이 모상 중에 균일하게 분산하고 탄성적으로 불균질한 복합재료의 거시적 응력-변형관계를 정식화하였다. 정식화의 과정에서, 주위의 구속을 받지 않는 어떤 영역에 응력의 발생을 동반하지 않는 변형률 (transformation strain $\varepsilon_{kl}$), 즉 열팽창 제수를 갖는 물체가 온도변화 ${\Delta}T$ 를 갖는 경우의 열팽창 변형 $\alpha$${\Delta}T$나, 물체가 일정한 소성 변형을 받았을 때의 소성 변형 등을 예로들 수 있는 역학 장을 정의하였다. 본 연구에서 전개한 방법은 선형 탄성론에 기초를 두고 있으며 복합체의 탄성거동만이 아니라 탄성-소성 거동의 해석 또한 가능하게 하였다

• Interaction and multiscale mechanics
• /
• 제1권2호
• /
• pp.251-278
• /
• 2008

In this study, we investigate the discontinuous-derivative treatment at the gas-liquid interface in underwater explosion (UNDEX) problems by using the Moving Least Squares-Smoothed Particle Hydrodynamics (MLS-SPH) method, which is known as one of the particle methods suitable for problems where large deformation and inhomogeneity occur in the whole domain. Because the numerical oscillation of pressure arises from derivative discontinuity in the UNDEX analysis using the standard SPH method, the MLS shape function with Discontinuous-derivative Basis Function (DBF) that is able to represent the derivative discontinuity of field function is utilized in the MLS-SPH formulation in order to suppress the nonphysical pressure oscillation. The effectiveness of the MLS-SPH with DBF is demonstrated in comparison with the standard SPH and conventional MLS-SPH though a shock tube problem and benchmark standard problems of UNDEX of a trinitrotoluene (TNT) charge.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.291-293
• /
• 2002

Accurate dose calculation in radiation treatment planning is most important for successful treatment. Since human body is composed of various materials and not an ideal shape, it is not easy to calculate the accurate effective dose in the patients. Many methods have been proposed to solve the inhomogeneity and surface contour problems. Monte Carlo simulations are regarded as the most accurate method, but it is not appropriate for routine planning because it takes so much time. Pencil beam kernel based convolution/superposition methods were also proposed to correct those effects. Nowadays, many commercial treatment planning systems, including Pinnacle and Helax-TMS, have adopted this algorithm as a dose calculation engine. The purpose of this study is to verify the accuracy of the dose calculated from pencil beam kernel based treatment planning system Helax-TMS comparing to Monte Carlo simulations and measurements especially in inhomogeneous region. Home-made inhomogeneous phantom, Helax-TMS ver. 6.0 and Monte Carlo code BEAMnrc and DOSXYZnrc were used in this study. Dose calculation results from TPS and Monte Carlo simulation were verified by measurements. In homogeneous media, the accuracy was acceptable but in inhomogeneous media, the errors were more significant.

• 한국수자원학회논문집
• /
• 제47권8호
• /
• pp.671-684
• /
• 2014

변동점 분석은 강우, 유량, 온도 등의 수문기상자료의 기초적인 정보를 이해함에 있어 유용한 수단으로 활용될 수 있다. 특히 합리적인 방법으로 분석된 미래 강우량에 대한 변동점 분석 결과는 최근 기후변화로 인해 발생되는 홍수나 가뭄과 같은 수문현상을 예측하는 데 있어 문제가 되는 비동질성 또는 비정상성 요인을 해결하는 데 있어 중요하게 활용될 수 있다. 따라서 본 연구에서는 변동성 분석을 위해 이용되는 3가지의 이론(CUSUM, BCP, DP)을 소개함과 함께 3가지 기법들의 특성을 알아보기 위한 상호비교 연구를 수행하였다. 3가지 종류의 합성 모의 강우자료의 생성을 통해 3가지 기법들을 수행한 뒤 그 결과를 특정 성능평가 절차를 거쳐 평가하였으며, 그 중 2가지 기법을 국내 관측 강우자료 및 미래 강우자료의 변동점 분석에 적용하고 그 결과를 제시하였다. 기법 간 비교를 통해 BCP 0.9가 가장 우수한 탐색능력이 있는 것으로 분석되었으며, DP 또한 합리적으로 사용될 수 있을 것으로 판단되었다. 향후 이와 같은 강우자료에 대한 변동점 분석에 관한 연구는 비동질성이나 비정상성을 고려하여 수문모형을 구축하는 연구 등에 있어 효율적으로 사용될 수 있다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.349-355
• /
• 1999

The texture inhomogeniety during rolling is one of the greatest problems. Especially, shear texture develops more easily during ferritic rolling of steel sheets at high temperatures due to friction between rolls and the material. In this study, the influence of front and back tensions on the texture development during ferritic rolling has been studied. The rolling textures were simulated using the full constrains Taylor-Bishiop-Hill model with the strain history obtained from finite element analysis. The calculated textures showed that the back tension rolling could reduce the shear component more effectively than front tension or rolling without tension. However, the experimental results showed that the lension effect was very small compared to our prediction. It might be attributed to initial texture and difference in frictions between simulation and experiments.

• 오토저널
• /
• 제11권2호
• /
• pp.41-54
• /
• 1989

In this study, steady state heat conduction problems of the cylinder block of turbocharged gasoline engine were solved by the boundary element method. Surface of the cylinder block was divided by the triangular cells with constant potential. Temperature distribution, effective heat transfer coefficient of the cylinder block were investigated with variation of equivalence ratio, engine speed and boost pressure. The results show that maximum temperature of cylinder block increase rapidly with increasing engine speed and boost pressure. The monolithic structure of cylinder block results in sever inhomogeneity of inner wall temperature at the high engine speed and boost pressure.

• 한국결정성장학회지
• /
• 제14권4호
• /
• pp.174-186
• /
• 2004

Striations are growth-induced inhomogeneities which hamper the applications of solid-solution crystals and of doped crystals in numerous technologies. Thus the optimized performance of solid solutions often can not be exploited. The inhomogeneity problem can be solved in specific cases by achieving a distribution coefficient one in growth from melts and from solutions. Macrostep-induced striations can be suppressed by controlling the growth mode, by achieving growth on facets thereby preventing step bunching. Thermal striations are commonly assumed to be caused by convective instabilities so that reduced convection by microgravity or by damping magnetic fields was and is widely attempted to reduce such inhomogeneities. Here it will be shown that temperature fluctuations at the growth interface cause striations, and that hydrodynamic fluctuations in a quasi-isothermal growth system do not cause striations. The theoretically derived conditions were experimentally established and allowed the growth of striation-free crystals of $KTa_{1-x}Nb_xO_3$"KTN" solid solutions. Hydrodynamic variations from the accelerated crucible rotation technique ACRT did not cause striations as long as the temperature was controlled within $0.03^{\circ}$ at $1200^{\circ}C$ growth temperature. Alternative approaches to solve or reduce the segregation and striation problems in growth from melts and from solutions are discussed as well.

• 한국세라믹학회지
• /
• 제41권6호
• /
• pp.439-443
• /
• 2004

착제중합법을 이용하여 SrAl$_2$O$_4$를 합성 시 핵생성 초기단계를 관찰하였다. 고상반응법을 이용했을 때의 문제점인 불균일성과 높은 합성온도를 유지전구체를 이용한 착체중합법으로 해결하였다. 전구체 분해과정은 40$0^{\circ}C$부터 관찰되었으며, 원소분석기와 주사전자현미경으로 관찰하였다. 핵생성 단계를 투과전자현미경으로 관찰하여 30∼50 nm의 결정이 생성되고 있음을 알 수 있었고, XRD 패턴들을 분석하여 그 관찰 결과와 일치함을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제24권11호
• /
• pp.876-881
• /
• 2011

The sintering, defect and grain boundary characteristics of Bi-based ZnO chip varistor (1,608 mm size) have been investigated to know the possibility of lowering a manufacturing price by using 100 % Ag inner-electrode. The samples were prepared by general multilayer chip varistor process and characterized by shrinkage, SEM, current-voltage (I-V), admittance spectroscopy (AS), impedance and modulus spectroscopy (IS & MS) measurement. There are no problems to make a chip varistor with 100% Ag inner-electrode in the sintering temperature range of 850~900$^{\circ}C$ for 1 h in air. A good varistor characteristics ($V_n$= 9.3~15.4 V, a= 23~24, $I_L$= 1.0~1.6 ${\mu}A$) were revealed but formed $Zn_i^{{\cdot}{\cdot}}$(0.209 eV) as dominant defect, and increased the distributional inhomogeneity and the temperature instability in grain boundary barriers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.61-63
• /
• 2007

In high field (> 3 T) MR imaging, the magnetic field inhomogeneity in the target object increases due to the nonuniform electro-magnetic characteristics and relatively high Larmor frequency. Especially in the body imaging, the effect causes more serious problems resulting in locally high SAR(Specific Absorption Ratio). In this paper, we propose an optimized parallel-transmission RF coil element structure and show the utility of the coil by FDTD simulations to overcome the unwanted effects. Three types of TX coil elements are tested to maximize the efficiency and their driving patterns(amplitude and phase) optimized to have adequate field homogeneity, proper SAR level, and sufficient field strength. For the proposed coil element of 25 cm ${\times}$ 8 cm loop structure with 12 channels for a 3.0 T body coil, the 73% field non-uniformity without optimization was reduced to about 26% after optimization of driving patterns. The experimental as well as simulation results show the utility of the proposed parallel driving scheme is clinically useful for (ultra) high field MRI.