• Journal of the Korean Wood Science and Technology
• /
• 제38권6호
• /
• pp.480-489
• /
• 2010

국내 시판용 전통 목탄의 과학적인 성질 규명과 주요 기능성 분석과 이용 방안에 대한 분석을 실시하였다. 국내에서 구입 가능한 시판용 목탄의 범위 내에서 해부학적 특성, 원소 조성, 무기성분 조성, 발열량, 음이온 및 원적외선 방사량, 조습성 등의 분석을 통하여 기능성 재료로 이용 가능성에 대하여 판단하고자 하였다. 원소조성, 무기물 조성, 음이온 및 원적외선 방사량은 목탄 제조 방법과 제조회사에 따라서 큰 변이를 보였다. 특히 조습성은 흑탄의 경우 백탄이나 기계숯 보다 열등한 성능을 나타내었다. 전통숯을 기능성 재료로 사용하기 위해서는 해부학적 특성, 원소 조성, 무기물 조성, 발열량, 음이온 및 원적외선 방사량, 조습성을 분석하여 선택적 이용이 필요 할 것으로 생각한다. 또한 차후 원하는 기능에 맞는 목탄 제조 방법 기술의 개발이 필요할 것으로 생각한다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권3호
• /
• pp.223-230
• /
• 2014

본 연구는 한지 제조과정에서 특별한 용도가 없어서 버려지는 닥나무 목질부로 밀도 및 수지첨가량별로 파티클보드를 제조하고, 이를 건축마감재로 활용 가능성을 알아보고자 탈취효과, 원적외선 방사 및 실내 공기오염물질 방사특성에 대하여 검토하였다. 측정 결과 보드의 밀도 및 수지첨가량이 증가할수록 탈취율은 증가하였다. 탈취율은 80~90%, 원적외선 방사율은 0.892~0.899로 비교적 높았다. 총휘발성유기화합물은 수지첨가율 13%, 밀도 $0.6g/cm^3$인 보드가 $0.074mg/m^2{\cdot}h$로 가장 적게 방출되었고, 폼알데하이드는 보드 제조 조건별로 $0.004{\sim}0.006mg/m^2{\cdot}h$로 미세한 방출 특성을 보였다. 이와 같이 보드 제조 조건을 다양하게 하여 용도에 맞는 보드제조가 가능하다면, 닥나무 목질부로 제조된 보드는 건축마감재 이용가능성이 있을 것으로 생각된다.

• 한국환경과학회지
• /
• 제30권2호
• /
• pp.135-143
• /
• 2021

This study executed evaluation of drying characteristics based on the polymer injection rate (8%, 10% and 12%) and the drying method[NIF(near-infrared ray). According to this study analyzed VS, VS/TS, and calorific value compared with 'the auxiliary fuel standard of the thermoelectric power plant and the combined heat & power plant'. The results are as follows. In the case of NIR, the VS was slightly changed at the early stage of the material preheating period and the constant drying rate period with low moisture evaporation. But VS reduction was shown higher as moisture was dried. In the case of non-digested sludge with high VS content, the VS reduction rate by drying was shown lower than that of digested sludge. As the flocculant injection rate increased, the VS loss due th drying was found to be small. Also, the higher the flocculant injection rate was the longer the drying time. Especially, in the case of the NIR drying equipment, as the moisture content of sewage sludge decreased(moisture content 20~40%), the loss of net VS also showed a tendency to increase sharply. It is shown that the high calorific value according to the drying time of the non-digested sludge was changed from 590 kcaℓ/kg to 3,005 kcaℓ/kg and from 539 kcaℓ/kg to 2,796 kcaℓ/kg.

• 한국약용작물학회지
• /
• 제15권4호
• /
• pp.266-270
• /
• 2007

가래나무 잎을 원적외선 30, 40 및 50 v에서 각각 10, 20 및 30분을 처리하였다. 원적외선을 조사한 잎의 총 폴리페놀 함량, 총 플라보노이드 함량, 잎 추출물의 DPPH radical 소거 활성 등을 분석한 결과, 원적외선 30 v에서 20분간 조사한 처리구에서 총 폴리페놀 함량은 25.43 mg/g로 , 총 플라보노이드 함량은 39.38 mg/g으로 가장 높게 나타났다. 그 반면에, 원적외선 50 v에서 30분간 조사한 처리구에서 총폴리페놀 함량은 16.93 mg/g으로, 총플라보노이드 함량은 23.78 mg/g으로 가장 낮게 나타났다. 전체적으로 원적외선 처리에 의해 잎에 함유한 항산화 물질의 함량의 증가는 물론, 그 추출물의 항산화 활성도 증가하는 것을 알 수 있었다. 하지만 원적외선 처리가 가래나무에 함유한 어떠한 특정적인 물질들의 증가에 관하여서는 추후에 더욱 많은 연구가 필요할 것으로 사료된다.

• 한국수산과학회지
• /
• 제53권5호
• /
• pp.707-716
• /
• 2020

Red sea cucumber Stichopus japonicus, was dried using three methods-far-infrared ray, vacuum, and freeze drying and then enzymatically hydrolyzed using nine proteases: Alcalase, Flavourzyme, Kojizyme, Neutrase, Protamex, trypsin, α-chymotrypsin, and papain. In addition, the potential ability of hydrolysates to inhibit lipid accumulation in 3T3-L1 adipocytes was evaluated. The yield of hydrolysates from red sea cucumbers dried using each method was higher than that of the distilled water extract, and protein contents were either similar or higher. The hydrolysates that exhibited inhibitory effects on lipid accumulation, as demonstrated via Oil red O staining, were those obtained by far-infrared ray drying coupled with Alcalase, Flavourzyme, Kojizyme, or Neutrase treatment. In addition to the advantages of far-infrared drying and the characteristics of Flavourzyme, the Flavourzyme hydrolysate of far-infrared-dried red sea cucumber showed the highest inhibitory effect on lipid accumulation. In addition, this hydrolysate significantly decreased the expression of the protein factor fatty acid-binding protein 4, which is related to the late differentiation of 3T3-L1 adipocytes. Taken together, these results suggest that Flavourzyme hydrolysates from farinfrared-dried red sea cucumber may be used as a functional food and/or a pharmaceutical ingredient for the inhibition of lipid accumulation.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.1-10
• /
• 2004

The structural changes occurring in the isothermal crystallization processes of polyethylene (PE), poly-oxymethylene (POM), and vinylidene fluoridetrifluoroethylene (VDFTrFE) copolymer have been reviewed on the basis of our recent experimental data collected by the time-resolved measurements of synchrotron-sourced wide-angle (WAXS) and small-angle X-ray scatterings (SAXS) and infrared spectra. The temperature jump from the melt to a crystallization temperature could be measured at a cooling rate of 600-1,000 $^{\circ}C$/min, during which we collected the WAXS, SAXS, and infrared spectral data successfully at time intervals of ca. 10 sec. In the case of PE, the infrared spectral data clarified the generation of chain segments of partially disordered trans conformations immediately after the jump. These segments then became transformed into more-regular all-trans-zigzag forms, followed by the formation of an orthorhombic crystal lattice. At this stage, the generation of a stacked lamella structure having an 800-${\AA}$-long period was detected in the SAXS data. This structure was found to transfer successively to a more densely packed lamella structure having a 400-${\AA}$-long period as a result of the secondary crystallization of the amorphous region in-between the original lamellae. As for POM, the formation process of a stacked lamella structure was essentially the same as that mentioned above for PE, as evidenced from the analysis of SAXS and WAXS data. The observation of morphology-sensitive infrared bands revealed the evolution of fully extended helical chains after the generation of lamella having folded chain structures. We speculate that these extended chains exist as taut tie chains passing continuously through the neighboring lamellae. In the isothermal crystallization of VDFTrFE copolymer from the melt, a paraelectric high-temperature phase was detected at first and then it transferred into the ferroelectric low-temperature phase at a later stage. By analyzing the reflection profile of the WAXS data, the structural ordering in the high-temperature phase and the ferroelectric phase transition to the low-temperature phase of the multi-domain structure were traced successfully.

• 스마트미디어저널
• /
• 제7권3호
• /
• pp.29-34
• /
• 2018

본 논문은 주변 소음이 많은 환경에서 보청기 수신 성능 향상을 위하여 적외선을 이용한 광통신 기술을 접목시키는 연구이다. 마이크로폰과 적외선 발광 다이오드를 포함하는 송신 모듈에서 음성신호를 적외선 광 신호로 변환시켜 공기 중에 내보내고, 일정 거리 떨어진 곳에 위치한 수신 모듈에서 적외선 신호를 수신하여 전기 신호로 변환하여 디지털 보청기의 입력 단에 전달한다. 특별히 수신 모듈은 보청기에 부착되어야 하므로 소형이며 저전압이고 저전력 소모가 바람직하다. 디지털 변조 방식과 아날로그 무변조 방식의 적외선 통신 기술을 적용하여 실험한 결과 실내에서 약 5미터 거리의 적외선 통신은 아날로그 무변조 방식이 적합함을 보였다. 송신 모듈과 수신 모듈 시제품을 제작하여 디지털 보청기에 연결하고 내부 파라미터를 조정하여 음성 신호를 정상 송수신함을 확인하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권11호
• /
• pp.490-492
• /
• 2005

A study on radiation hardening of infrared(IR) detector, the chief component of IR camera was performed. The radiation test on IR sensor passivated with the ZnS by Co$^{60}$ gamma-ray over 1 Mrads showed the reduction in Ro by 1/100 which was related to the noise level. This effect that was caused by carrier trapping in the ZnS passivation layer increased the leakage current and resulted in degradation in the device performance. For the radiation hardening of IR devices we suggested the ones with CdTe passivation layer which had a tendency to reluctant to carrier trapping in its layer and developed test patterns. Radiation test to the patterns showed that the our CdTe passivated device could survived over 1 Mrad gamma-ray dose.

• 한국태양에너지학회 논문집
• /
• 제24권1호
• /
• pp.21-27
• /
• 2004

Near Infrared Ray (NIR) are primarily of interest to the high energy physicist. It is the intermediate portion of the spectrum, which extends from approximately 0.8 to 1.5 ${\mu}m$ and include a portion of the all of infrared, that is thermal radiation and is pertinent to heat transfer. It is important to study that temperature distribution of the drying materials by surface encompasses a range of NIR wave lengths. This study is to investigate the characteristics of NIR dryer by experimental results. it was made a comparison with various textiles, velocity ratio and distance of lamp and textiles. In case of spongy type textile the drying performance is the superior of all. The 0.15m distance drying effect of improvement 30% more than 0.26m distance between lamp and textiles. As the contained water increases, the drying speed for textile can be increased.

• 대한의용생체공학회:의공학회지
• /
• 제30권5호
• /
• pp.412-417
• /
• 2009

The purpose of this study was to assess the ability of this device during clinically important episodes of extravasation. The extravasation detection accessory (EDA) system was based of infrared ray with detection sensor, an amplifier, alarm device, receiver, cable and a computer based system. This study was a prospective, observational study in which the EDA system was used to monitor the automated mechanical injection of contrast media. Three hundred patients referred for contrast media enhanced body computed tomography studied in a prospective, observation study in which the EDA system was used to identify and interrupt any injection associated with clinically important extravasation. There were 8 true-positive cases, 276 true-negative cases, 15 false-positive cases and 1 false-negative cases. The EDA system had a sensitivity of 88.8% and a specificity of 94.8% for the detection of clinically important extravasation. The EDA system had good sensitivity for the detection of clinically important extravasation and the EDA system has the clinical potential for the early detection of extravasation of the contrast medium that is administered with power injectors.