• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.253-257
• /
• 2011

This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1103-1107
• /
• 2009

Lately, trend is change to concept that management traffic of ship is magnified gradually to near shore waters from harbor. Therefore, introducing the AtoN AIS technology that install AIS in the ground station, lighthouse, bouy, sea facilities etc.. that is support equipment for safety sailing of ship and safety security of harbor and ship administration. The operation and maintenance of AtoN AIS are required to efficient method. With this actuality, sea advanced nation They has been apply for developing AtoN AIS equipment that is connected equipment of technology standard in IALA. Because of it is expected to depend equipment in income, that is required to domestic technology of the AtoN AIS. This paper is targeted to development that is suitable automation AtoN AIS equipment in environmental peculiarity for construnstrunstrAtoN operating administration center. It has been realization the interface module for control and monitoring system and the communications protocol for information interchange.

• Journal of Information Processing Systems
• /
• v.15 no.3
• /
• pp.593-603
• /
• 2019

In wearable healthcare systems, sensor devices can be deployed in places around the human body such as the stomach, back, arms, and legs. The sensors use tiny batteries, which have limited resources, and old sensor batteries must be replaced with new batteries. It is difficult to deploy sensor devices directly into the human body. Therefore, instead of replacing sensor batteries, increasing the lifetime of sensor devices is more efficient. A transmission power control (TPC) algorithm is a representative technique to increase the lifetime of sensor devices. Sensor devices using a TPC algorithm control their transmission power level (TPL) to reduce battery energy consumption. The TPC algorithm operates on a closed-loop mechanism that consists of two parts, such as sensor and sink devices. Most previous research considered only the sink part of devices in the closed-loop. If we consider both the sensor and sink parts of a closed-loop mechanism, sensor devices reduce energy consumption more than previous systems that only consider the sensor part. In this paper, we propose a new approach to consider both the sensor and sink as part of a closed-loop mechanism for efficient energy management of sensor devices. Our proposed approach judges the current channel condition based on the values of various body sensors. If the current channel is not optimal, sensor devices maintain their current TPL without communication to save the sensor's batteries. Otherwise, they find an optimal TPL. To compare performance with other TPC algorithms, we implemented a TPC algorithm and embedded it into sensor devices. Our experimental results show that our new algorithm is better than other TPC algorithms, such as linear, binary, hybrid, and ATPC.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.363-366
• /
• 2019

Blockchain technology is a new paradigm that will change existing business processes and has a significant impact on all industries, not just on specific industries. The medical industry also expects the impact of blockchain technology to be very significant. I think blockchain technology should be applied in the medical industry because the medical industry has the problem of information asymmetry due to the structural characteristics of a centralized system composed of hospitals. However, no one can be sure that the value of blockchain technology is absolutely right, and absolute trust should be avoided. Blockchain technology provides many limitations to the process in which blockchain technology is applied in the medical industry, as it can be seen as still immature in terms of security and scalability. Therefore, we analyze the application cases of blockchain technology in the medical field, current problems in the medical field, solutions and issues through Blockchain.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.9
• /
• pp.81-88
• /
• 2021

In this paper, we analyze the possibility of deregistration attack in 5G SNPN (Standalone Non-Public Network) based on 3GPP standard document. In the deregistraion attack, the attacker pretends to be a UE that is normally registered with AMF (Access and Mobility Management Function) and attempts to establish a spoofed RRC (Radio Resource Control) connection, causing AMF to deregister the existing UE. The existing deregistration attack attempts a spoofed RRC connection to the AMF in which the UE is registered. In addition, this paper analyzes whether deregistration attack is possible even when an attacker attempts to establish a spoofed RRC connection to a new AMF that is different from the registered AMF. When the 5G mobile communication network system is implemented by faithfully complying with the 3GPP standard, it is determined that a deregistration attack of a UE is impossible.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1609-1617
• /
• 2019

Described in this paper is a design of hardware accelerator for implementing public-key cryptographic protocols (PKCPs) based on Elliptic Curve Cryptography (ECC) and RSA. It supports five elliptic curves (ECs) over GF(p) and three key lengths of RSA that are defined by NIST standard. It was designed to support four point operations over ECs and six modular arithmetic operations, making it suitable for hardware implementation of ECC- and RSA-based PKCPs. In order to achieve small-area implementation, a finite field arithmetic circuit was designed with 32-bit data-path, and it adopted word-based Montgomery multiplication algorithm, the Jacobian coordinate system for EC point operations, and the Fermat's little theorem for modular multiplicative inverse. The hardware operation was verified with FPGA device by implementing EC-DH key exchange protocol and RSA operations. It occupied 20,800 gate equivalents and 28 kbits of RAM at 50 MHz clock frequency with 180-nm CMOS cell library, and 1,503 slices and 2 BRAMs in Virtex-5 FPGA device.

• Electronics and Telecommunications Trends
• /
• v.36 no.1
• /
• pp.54-63
• /
• 2021

Since the recent COVID-19 pandemic, countries have been strengthening trade protection for their security, and the importance of securing strategic materials, such as food, is drawing attention. In addition to the cultural aspects, the global preference for food produced in Korea is increasing because of the Korean Wave. Thus, the Korean food industry can be developed into a high-value-added export food industry. Currently, Korea has a low self-sufficiency rate for foodstuffs apart from rice. Korea also suffers from problems arising from population decline, aging, rapid climate change, and various animal and plant diseases. It is necessary to develop technologies that can overcome the production structures highly dependent on the outside world of food and foster them into export-type system industries. The global agricultural industry-related technologies are actively being modified via data accumulation, e.g., environmental data, production information, and distribution and consumption information in climate and production facilities, and by actively expanding the introduction of the latest information and communication technologies such as big data and artificial intelligence. However, long-term research and investment should precede the field of living organisms. Compared to other industries, it is necessary to overcome poor production and labor environment investment efficiency in the food industry with respect to the production cost, equipment postmanagement, development tailored to the eye level of field workers, and service models suitable for production facilities of various sizes. This paper discusses the flow of domestic and international technologies that form the core issues of the site centered on the 4th Industrial Revolution in the field of agriculture, livestock, and fisheries. It also explains the environmental awareness production technologies centered on sustainable intelligence platforms that link climate change responses, optimization of energy costs, and mass production for unmanned production, distribution, and consumption using the unstructured data obtained based on detection and growth measurement data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.5
• /
• pp.668-674
• /
• 2022

Machine learning techniques using visual data have high usability in fields of industry and service such as scene recognition, fault detection, security and user analysis. Among these, user analysis through the videos from CCTV is one of the practical way of using vision data. Also, many studies about lightweight artificial neural network have been published to increase high usability for mobile and embedded environment so far. In this study, we propose the network combining the object detection and classification for mobile graphic processing unit. This network detects pedestrian and face, classifies age and gender from detected face. Proposed network is constructed based on MobileNet, YOLOv2 and skip connection. Both detection and classification models are trained individually and combined as 2-stage structure. Also, attention mechanism is used to improve detection and classification ability. Nvidia Jetson Nano is used to run and evaluate the proposed system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.296-299
• /
• 2022

The rapid urban expansion and the increase in natural disasters due to the increase of population after industrialization and climate change are causing numerous urban management problems. The IP based hyper-connectivity caused by the initiation of the 4th industrial revolution enables a variety of technologies and services that produce vast amounts of data and solve urban management problems based on this. Especially, the quality of life is improved by providing the necessary information for life that are produced through a sensor network on wired and wireless communication. In this study, we intend to propose the method of optimal communcation network composition for innovative and futuristic city management technology through the case of K-water Smart Village Communication System

• Information Systems Review
• /
• v.25 no.2
• /
• pp.163-180
• /
• 2023

Based on the Technology-Organization-Environment (TOE) model, this study proposed a research model that explains the continuance intention of users in the with Covid-19 era considering the technical, organizational, and environmental aspects of Remote Work Solution (RWS). To verify the research model and hypothesis, an online survey was conducted on domestic RWS users. Partial least squares (PLS) were utilized to analyze the collected 411 data. As a result of the analysis, it was found that functionality and security level had positive impacts on both productivity improvement and satisfaction. However, it was also confirmed that organizational readiness had a positive effect on productivity improvement but did not affect satisfaction. Furthermore, the results revealed that government support had a positive relationship with continuance intention, but the health concerns did not. Finally, the correlations between productivity improvement, satisfaction, and continuous intention were confirmed to be significant. Therefore, 9 out of a total of 11 hypotheses were supported.