We investigated the growth pattern of Red-tongued viper snakes (Gloydius ussuriensis), which were captured from the islet of the Jeju Island, Gapado between April, 2006 and November, 2009. The results indicated that there were some snakes that grew relatively fast, but most snakes either almost did not grow or grew around 10mm in snout-vent length during one year period. High growth rates was April and June. Since the growth rate of snakes is highly correlated with their foods, these results implied that the feeding activity of Red-tongued viper snakes is high during this period compared to other months. In female, difference in body condition between good-conditioned and bad-conditioned snakes became large as time elapsed from April to June. The body condition of the male Red-tongued viper snakes improved with the progression of time from April till June. Many of the Red-tongued viper snakes were captured between April and June, while they were rarely captured between July and September. Some of the Red-tongued viper snakes were captured during the autumn season. This tendency was because snakes were rarely active during hibernation and peak summer seasons. Thus, Red-tongued viper snakes are active between April and June and between September and November. They then go into hibernation as the temperature dropped in November. Furthermore, the limitation of the movement period of the Red-tongued viper snakes restricted their feeding activities while foods became scarce, which ultimately restricted their overall growth rate. The growth rate of the snakes decreased with age. The snout-vent length of the Red-tongued viper snakes and growth rate showed a negative correlation (r = -0.591), however, it was not statistically significant due to small sample size. The findings from this study could provide meaningful information in the further study of the life cycle of Red-tongued viper snakes.
The purpose of this study was to examine the consumers' acceptance of irradiated foods according to sociodemographic characteristics and the factors to distinguish subjects with differential levels of their willingness to buy them. Data were collected from the 365 women living in Youngnam area by the self-administered questionnaire. The results from this study were as follows. First, consumers were concerned regarding food safety issues in general and particularly preservatives. Second, many subjects had not heard of the irradiated foods and showed wait-and-see attitude in the willingness to accept them. Consumers' willingness to purchase them were higher than any other cases if radiation would not remain in foods. Third, the results from the discriminant analyses showed that the concern toward food safety, perceived innovativeness, willingness to pay more for organic foods, and knowledge of irradiation were the factors to distinguish groups with differential levels of willingness to purchase the irradiated foods. The results from the study imply that accurate and scientific information about food irradiation should be given to the consumers.
This study took existing invention intellectual property related textbooks being utilized in secondary vocational education, analyzed the formation status of 'key learning elements' reflection ratio and drew optimum key learning elements formation ratio by invention intellectual property education content required in secondary vocational education in the future. For this, the study task was set up as 'what kind and how much of invention intellectual property key learning elements are in the invention intellectual property textbook education content now and what is the desirable ratio of each key learning elements in the future'. To resolve this task, 3 specialists analyzed the invention intellectual property education content reflection status and optimum reflection ratio by invention intellectual property education content required in the future is suggested by Delphi survey. The results of this study are as following. First, the result of analysis on invention intellectual property key learning elements included in the invention patent recognition books being utilized in secondary vocational education was that the books included all key learning elements; however, some textbooks have the trend of concentrating in D area (problem-solving activities). Second, the result of analysis on the reflection ratio by invention intellectual property education content area in the invention patent recognition books being utilized in secondary vocational education was that there was the trend in most textbooks that they concentrate in intellectual property creation area; while some textbooks deal with intellectual property protection area and intellectual property utilization area. Regarding by achievement type, knowledge area was main in all textbooks. Meanwhile, function area is dealt in invention patent basic, invention and problem-solving and design textbooks. Attitude area is not dealt or is dealt insufficiently in most textbooks. Third, the optimum reflection ratio of invention intellectual property education key learning elements required in secondary vocational education in the future as obtained by specialists' delphi survey was that it is necessary to decrease D (problem-solving activities) 17.7% area, E(invention fusion knowledge) 2.9% area, K(patent application) 6.9% and L(patent information investigation) area 9.6%. Regarding the optimum reflection ratio of invention intellectual property education content, it is suggested that the invention literacy area 3.1%, intellectual property creation area 4.5% and intellectual property protection area 10.6% would be decreased; while intellectual property utilization area 17.7% would be increased. Regarding optimum reflection ratio of achievement type, it is suggested that knowledge area 52% would be decreased; while function area 32.3% and attitude area 19.6% would be increased.
This research paper is to examine James Watt who led the 1st industrial revolution successfully. His great work was called monumental achievement in the human history of civilization. Here, we looked over the Watts' educational environment during his infant, juvenile, and adolescence period and also, his learning attitude about his own field through literature review. The basic infra of soft and hard wares for the industrial revolution through the process of R & D on new developing steam engine resulted from the very industrial revolution and its R & D environment were to be investigated. The useful information and knowledge from this process of the research are able to give an appropriate educational guidance to bring up the development of creativity in schooling systems. And also a lesson from the past could be used to provide the desirable direction for the 4th industrial revolution which is just begun to start now. The main results from this study are as follows; First, Watts' parents positively guided him onto the technology of manual field because they recognized their son was interested in technology field. The parents' attitude stimulated and guided his sons' self-development, had been equal to the aims of education. Second, Watt made a chance of making friendships with professors of Glasgow University. He spontaneously had done self-directed learning for getting knowledge and technology, and thus he became an expert of practical engineer and theorist. Third, the Lunar society, which was jumping over one's social position in their society of the 18th century through new thinking way, leading new ages had been very good R & D social infra for Watt to open and connect new advanced level of science and technology in his age. This society provided a study environment fields for their members to exchange their ideas of scientific curiosity and freely inquiry, technology informations. They had discussed and understood the issues to be occurred in their own fields and accumulated necessary knowledge for problem-solving, respectively. Such as this R & D system environment will be also considered in the modern research group. Fourth, the entrepreneur such as Boulton, who understand technology and grasp its value in future, is needed. The system of 'grue of management' will support the researcher with financial support, which is necessary in R & D. And the researcher like Watt who takes pleasure in technology itself and study eagerly in his field without financial problems, that is, 'grue of technical expert' is essential when leading to success in the industrial revolution.
In this paper, we explain the design and implementation of GWB(Gene WorkBench), which is a web-based, integrated system for efficiently managing and analyzing genomic sequences, Most existing software systems handling genomic sequences rarely provide both managing facilities and analyzing facilities. The analysis programs also tend to be unit programs that include just single or some part of the required functions. Moreover, these programs are widely distributed over Internet and require different execution environments. As lots of manual and conversion works are required for using these programs together, many life science researchers suffer great inconveniences. in order to overcome the problems of existing systems and provide a more convenient one for helping genomic researches in effective ways, this paper integrates both managing facilities and analyzing facilities into a single system called GWB. Most important issues regarding the design of GWB are how to integrate many different analysis programs into a single software system, and how to provide data or databases of different formats required to run these programs. In order to address these issues, GWB integrates different analysis programs byusing common input/output interfaces called wrappers, suggests a common format of genomic sequence data, organizes local databases consisting of a relational database and an indexed sequential file, and provides facilities for converting data among several well-known different formats and exporting local databases into XML files.
Journal of the Korean Society of Marine Environment & Safety
/
v.22
no.6
/
pp.731-737
/
2016
To understand the characteristics and strength of the cold water that has caused damage to marine-culturing farms around Guryongpo, in the southwestern part of Korea, surface and water column temperatures were collected from temperature loggers deployed at a sea squirt farm during August-November 2007 and from a Real-time Information System for Aquaculture environment operated by NIFS (National Institute of Fisheries Science) during July-August 2015 and 2016. During the study period, surface temperature at Guryongpo decreased sharply when south/southwestern winds prevailed (the 18-26th of August and 20-22nd of September 2007 and the 13-15th of July 2015) as a result of upwelling. However, the deep-water (20-30m) temperature increased during periods of strong north/northeasterly winds (the 5-7th and 16-18th of September 2007) as a result of downwelling. Among the cold water events that occurred at Guryongpo, the mass death of cultured fish followed strong cold water events (surface temperatures below $10^{\circ}C$) that were caused by more than two days of successive south/southeastern winds with maximum speeds higher than 5 m/s. A Cold Water Index (CWI) was defined and calculated using maximum wind speed and direction as measured daily at Pohang Meteorological Observatory. When the average CWI over two days ($CWI_{2d}$) was higher than 100, mass fish mortality occurred. The four-day average CWI ($CWI_{4d}$) showed a high negative correlation with surface temperature from July-August in the Guryongpo area ($R^2=0.5$), suggesting that CWI is a good index for predicting strong cold water events and massive mortality. In October 2007, the sea temperature at a depth of 30 m showed a high fluctuation that ranged from $7-23^{\circ}C$, with frequency and spectrum coinciding with tidal levels at Ulsan, affected by the North Korean Cold Current. If temperature variations at the depth of fish cages also regularly fluctuate within this range, damage may be caused to the Guryongpo fish industry. More studies are needed to focus on this phenomenon.
Journal of the Korean Society for Marine Environment & Energy
/
v.11
no.3
/
pp.138-149
/
2008
Rapid accumulation of carbon dioxide in the atmosphere for the past century leads to acidify the surface ocean and contributes to the global warming as it forms acid in the ocean and it is a green house gas. In order to curb the green house gas emissions, in particular carbon dioxide, various multilateral agreements and programs have been established including UN Convention of Climate Change and its Kyoto Protocol for the last decades. Also a number of geo-engineering projects to manipulate the radiation balance of the earth have been proposed both from the science and industrial community worldwide. One of them is ocean fertilization to sequester carbon dioxide from the atmosphere through the photosynthesis of phytoplankton in the sea. Deliberate fertilization of the ocean with iron or nitrogen to large areas of the ocean has been proposed by commercial sector recently. Unfortunately the environmental consequences of the large scale ocean iron fertilization are not known and the current scientific information is still not sufcient to predict. In 2007, the joint meeting of parties of the Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter, 1972 and 1996 Protocol (London Convention/Protocol) has started considering the purposes and circumstances of proposed large-scale ocean iron fertilization operations and examined whether these activities are compatible with the aims of the Convention and Protocol and explore the need, and the potential mechanisms for regulation of such operations. The aim of this paper is to review the current development on the commercial ocean fertilization activities and management regimes in the potential ocean fertilization activities in the territorial sea, exclusive economic zone, and high seas, respectively, and further to have a view on the emerging international management regime to be London Convention/Protocol in conjunction with a support from the United Nations General Assembly through The United Nations Open-ended Informal Consultative Process on Oceans and the Law of the Sea.
In crime scene investigation, fingerprint identification is regarded to be one of the most important techniques for personal identification. However, objective and unbiased evaluation methods that would compare the fingerprints with diverse available and developing methods are currently lacking. To develop an objective and quantitative method to improve fingerprint evaluation, a preliminary study was performed to extract useful research information from the analysis with densitometric image analysis (CP Atlas 2.0) and the Automated Fingerprint Identification System (AFIS) for the developed fingerprints on porous surfaces. First, inked fingerprints obtained by varying pressure (kg.f) and pressing time (sec.) to find optimal conditions for obtaining fingerprint samples were analyzed, because they could provide fingerprints of a relatively uniform quality. The extracted number of minutiae from the analysis with AFIS was compared with the calculated areas of friction ridge peaks from the image analysis. Inked fingerprints with a pressing pressure of 1.0 kg.f for 5 seconds provided the most visually clear fingerprints, the highest number of minutiae points, and the largest average area of the peaks of the friction ridge. In addition, the images of the developed latent fingerprints on thermal paper with the iodine fuming method were analyzed. Fingerprinting condition of 1.0 kg.f/5 sec was also found to be optimal when generating highest minutiae number and the largest average area of peaks of ridges. Additionally, when the concentration of ninhydrin solution (0.5 % vs. 5 %) was used to compare the developed latent fingerprints on print paper, the best fingerprinting condition was 2.0 kg.f/5 sec and 5 % of ninhydrin concentration. It was confirmed that the larger the average area of the peaks generated by the image analysis, the higher the number of minutiae points was found. With additional tests for fingerprint evaluation using the densitometric image analysis, this method can prove to be a new quantitative and objective assessment method for fingerprint development.
It is of importance that all countries in worldwide, including EU and China, have adopted the Restrictions on the use of certain Hazardous Substances (RoHS) for all electronics. IEC62321 document, which was published by the International Electronics Committee (IEC) can have conflicts with the standards in the market. On the contrary Publicly Accessible Specification (PAS) for sampling published by IEC TC111 can be adopted for complementary application. In this work, we tried to find a route to disassemble and disjoint cellular phone sample, based on PAS and compare the screening methods available in the market. For this work, the cellular phone produced in 2001, before the regulation was born, was chosen for better detection. Although X-ray Fluorescence (XRF) showed excellent performance for screening, fast and easy handling, it can give information on the surface, not the bulk, and have some limitations due to significant matrix interference and lack of variety of standards for quantification. It means that screening with XRF sometimes requires supplementary tool. There are several techniques available in the market of analytical instruments. Laser ablation (LA) ICP-MS, energy dispersive (ED) XRF and scanning electron microscope (SEM)-energy dispersive X-ray (EDX) were demonstrated for screening a cellular phone. For quantitative determination, graphite furnace atomic absorption spectrometry (GF-AAS) was employed. Experimental results for Pb in a battery showed large difference in analytical results in between XRF and GF-AAS, i.e., 0.92% and 5.67%, respectively. In addition, the standard deviation of XRF was extremely large in the range of 23-168%, compared with that in the range of 1.9-92.3% for LA-ICP-MS. In conclusion, GF-AAS was required for quantitative analysis although EDX was used for screening. In this work, it was proved that LA-ICP-MS can be used as a screening method for fast analysis to determine hazardous elements in electrical products.
Water polution status of urban streams in Daegu city were observed to provide the basic information for the effective purification of urban sewage and the conservation of Keumho river. Periodically, pH, DO, COD, nitrate and phosphate of water were investigated at Yee cheon, B$\ddot{o}$m$\ddot{o}$ cheon, Chilsung cheon, Dalseo cheon and Kongdan cheon. The results were as follows. 1) The ranges of average values of analyzed components for 12 months at six sampling sites were pH 7.3-8.2, DO trace-6.5ppm, COD 20.4-116.9ppm, T-N 23.2-31.7ppm, $NH_4$-N 18.3-27.7ppm, $NO_2$-N 0.08-1.89ppm, $NO_3$-N 0.19-1.51ppm, $PO_4$-P 2.50-17.28ppm. 2) At Kongdan cheon, the most heavily polluted site, average values of components were pH 8.2, DO trace, COD 116.9ppm, T-N 23.2ppm, $NH_4$-N 18.3ppm, $NO_2$-N 1.89ppm, $NO_3$-N 1.51ppm, $PO_4$-P 17.28ppm. 3) The values of pH, DO, COD, T-N and $NH_4$-N at winter urban streams were higher than those at summer urban streams. And the values of $NO_2$-N and $PO_4$-P were more or less higher at summer urban streams.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.