• 정보처리학회논문지D
• /
• 제9D권1호
• /
• pp.161-166
• /
• 2002

PN 코드 포착 과정에서 기존의 방식은 한 시점에서 PN 코드를 검색하므로 PN 코드 포착시간에서 문제가 있다. 본 논문에서는 서로 다른 2개의 코드시점에서 PN 코드를 검색하므로 PN 코드 포착시간을 줄일 수 있는 알고리즘을 제안한다. 본 논문에서는 새롭게 제안한 알고리즘으로 ASIC 칩을 설계하였다. 제안한 알고리즘을 이용하여 설계한 ASIC 칩은 기존의 PN 코드 포착과정보다 면적(게이트의 수)은 약간 늘어났지만 PN 코드포착의 성능은 기존의 방법보다 더 좋음을 확인했다.

• 한국통신학회논문지
• /
• 제31권7A호
• /
• pp.696-701
• /
• 2006

In this paper, we analyze the performance of double-dwell hybrid initial acquisition in DS-UWB system via detection, miss, false alarm probabilities and mean acquisition time. In the analysis, we consider the effect of the acquisition sequence, and deployment scenario of the abundant multipath components over the small coverage of the piconet in DS-UWB system. Based on the simulation, we obtain various performance on the mean acquisition time by varying the parameters, such as the total number of hypotheses to be searched, subgroup size, and dwell time. Then, we suggest the optimum parameter set for the initial acquisition in DS-UWB system.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.229-234
• /
• 2006

Acquisition is to detect the presence of the GPS signal. Once the signal is detected, the estimated frequency and code phase are passed to a tracking loop to demodulate the navigation data. In order to detect the weak signal, multiple length of data integration is always needed. In this paper, we present five different acquisition approaches based on circular correlation and Fast Fourier Transform (FFT), using coherent as well as non-coherent integration techniques for the multiple length of collected GPS satellite signal. Moreover a general approach of determining the acquisition threshold is introduced based on noise distribution which has been proved effective, and independent of the hardware. In the end of this paper, the processing speed and acquisition gain of each method are illustrated, compared, and analyzed. The results show that coherent approach is much more time consuming compared to noncoherent approaches, and in the case of multiple length of data integration from 2ms to 8ms, the processing times consumed by the fastest non-coherent acquisition method are only 25.87% to 1.52% in a single search, and 34.76% to 1.06% in a global search of those in the coherent acquisition. However, coherent acquisition also demonstrates its better performance in the acquisition gain, and in the case of 8ms of data integration it is 4.23 to 4.41 dB higher than that in the non-coherent approaches. Finally, an applicable scheme of combining coherent and non-coherent acquisition approaches in the development of a real-time Software GPS receiver in the University of Tokyo is provided.

• 한국실내디자인학회논문집
• /
• 제20권1호
• /
• pp.138-145
• /
• 2011

This study analyzed the time to understand the space and the contents of information to be memorized in the indoor space. Understanding the space and examining the memory will not only provide the basic data on which visual activities occur in user's perceiving the designed space but also expand the activity range of interior designer. The summary of the study results is as follows: First, with respect to gender difference, the results showed that males grasped the space in a relatively shorter time. Females showed more concentrated distribution range than males. Second, as for the proper time by accumulative sum across time, the results showed that it increased continuously until V time zone(120~150 seconds), it decreased rapidly after the V zone, which indicated that the proper gazing time for the indoor space as the target of this study is less than 150 seconds(effective gazing time). Third, in terms of efficiency of information acquisition, the results suggested that "60~90 seconds" are the effective time for acquiring the greatest amount of information. Fourth, regarding the information acquisition method, males were approximately 4.1%~0.1% lower in the evaluation through phrase and image. The evaluation of subjects through phrase than image was connected to more accurate information acquisition.

• Journal of Positioning, Navigation, and Timing
• /
• 제2권1호
• /
• pp.1-8
• /
• 2013

A signal system for improving the code acquisition complexity of Global Navigation Satellite System (GNSS) receiver is proposed and the receiving correlator scheme is presented accordingly. The proposed signal system is a hierarchical code type with a duplexing configuration which consists of the Zadoff-Chu (ZC) code having a good auto-correlation characteristic and the Pseudo Random Noise (PRN) code for distinguishing satellites. The receiving correlator has the scheme that consists of the primary correlator for the ZC code and the secondary correlator which uses the PRN code for the primary correlation results. The simulation results of code acquisition using the receiving correlator of the proposed signal system show that the proposed signal scheme improves the complexity of GNSS receiver and has the code acquisition performance comparable to the existing GNSS signal system using Coarse/Acquisition (C/A) code.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.743-746
• /
• 1998

In this paper, we developed an outdoor augmented reality system which has remote real scences acquisition ability. The real scenes acquisition system consists of image acquisition system, tracking system, wireless data transceiver and power supply. Tracking system that consists of Tans Vector and RT-20 measures a position and attitude of the CCD camera that attached at the remote control helicopter. Wireless data transceiver system is utilized for data transmission of remote system that of attitude, position information, andreal scenes data that acquired by the CCD camera. Maximum propelling power of remote control helicopter is 15Kg, so we used 7.2V li-ion cell as a power supply for system minimize. As the results of experiment, the developing system presented application possibility of remote information acquisition system such as construction simulation & estimation, broadcasting, tour guide.

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2003년도 종합학술대회 논문집
• /
• pp.197-203
• /
• 2003

The purpose of the study is to develop an integrated knowledge structuring system for the domain of engineering, in which ontology-based literature mining, knowledge acquisition, knowledge integration, and knowledge retrieval are combined using XML-based tag information and ontology management. The system supports combining different types of databases (papers and patents, technologies and innovations) and retrieving different types of knowledge simultaneously. The main objective of the system is to facilitate knowledge acquisition and knowledge retrieval from documents through an ontology-based dynamic similarity calculation and a visualization of automatically structured knowledge. Through experimentations we conducted using 100,000 words economic documents reported in the "Go！ Japan" project for analyzing Japanese industrial situation, and 100,000 words molecular biology Papers, we show the system is Practical enough for accelerating knowledge acquisition and knowledge discovery from the information sea.

• International Journal of Advanced Culture Technology
• /
• 제7권3호
• /
• pp.92-96
• /
• 2019

This study analyzes the problems of fire qualification information websites and job search websites due to incomplete information in the job search process and suggests an improvement plan. It has been confirmed that the main reason for the cost of job searching is incomplete information required for a job search and job search through existing analysis. As a result, it is suggested to construct a smooth information system for economic entities and to provide easy access to information by mitigating the incompleteness of information. Based on this, analysis of the problems of Korean qualifications in the firefighting realm reveals that there is a qualification holder information and a job information site, and a qualification holder management system is established but only information of either qualification acquisition information or employment information is provided. In addition, it is easy to access information through a qualification acquisition information and employment information site via the Internet, but there are inconveniences that qualification acquisition information and employment information are dualized. In order to improve this, it is necessary to build a new customized integrated qualification management system that covers existing Q-net qualification acquisition information and worknet employment information.

• 조명전기설비학회논문지
• /
• 제16권6호
• /
• pp.102-108
• /
• 2002

본 논문에서는 지능형 교통 시스템(ITS)의 기본 정보인 차량정보와 도로정보를 실시간으로 제공하기 위하여 루프 검지기와, 피에조 센서를 사용한 차량정보 수집 시스템의 설계를 다루었다. 루프검지기와 피에조 센서를 도로차선마다 설치하고 프로세서와 입/출력 보드를 통하여 샘플링 주기에 의하여 센서의 신호를 읽어들여 차량 및 교통정보를 생성한다. 생성된 정보는 패킷형태로 만들어져 RS232C 직렬 통신과 모뎀을 통하여 원격에 있는 교통 관제시스템으로 전송된다. 이를 위하여 EISA BUS규격의 32채널 입/출력 보드와 차량정보 수집 프로그램을 설계하고 시뮬레이션 시스템에서 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.85-88
• /
• 2000

This paper describes a Band-Selective Charge-Pump PLL(CPPLL) for clock recovery and clock generator. The proposed PLL satisfies fast acquisition time and low jitter characteristics simultaneously by reducing initial frequency error. The acquisition time of the designed Band-Selective CPPLL can be decreased down to 55% of a conventional CPPLL.