• ETRI Journal
• /
• v.25 no.5
• /
• pp.407-411
• /
• 2003

A dielectric superstrate layer above a microstrip patch antenna has remarkable effects on its gain and resonant characteristics. This paper experimentally investigates the effect of a superstrate layer for high gain on microstrip patch antennas. We measured the gain of antennas with and without a superstrate and found that the gain of a single patch with a superstrate was enhanced by about 4 dBi over the one without a superstrate at 12 GHz. The impedance bandwidths of a single patch with and without a superstrate for VSWR < 2 were above 11%. The designed $2{\times}8$ array antenna using a superstrate had a high gain of over 22.5 dB and a wide impedance bandwidth of over 17%.

• Journal of the Korean Society for information Management
• /
• v.34 no.4
• /
• pp.227-245
• /
• 2017

This study mainly investigates the motivations of YouTube and Flicker users for posting videos or images/photos on each service. The motivational framework with ten factors such as enjoyment, self-efficacy, learning, personal gain, altruism, empathy, social engagement, community interest, reputation and reciprocity were used to test the motivations. Those who are users of YouTube and Flickr were recruited from Amazon Mechanical Turk to participate in online surveys. Findings show that learning and social engagement are the two most highly rated motivations. Altruism was rated relatively low, although it was strongly correlated with all other motivations. Personal gain was rated as the lowest by both users but Flickr users rated personal gain higher than YouTube users. Findings from this study could be applicable to specify user motivations for using the services and to upgrade the designs of the services in the future.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.900-905
• /
• 2009

A common drain feedback CMOS wideband LNA with current bleeding and input inductive series-peaking techniques is presented in this paper. DC coupling is adopted between cascode and feedback amplifiers, so that the gain and NF of the LNA can be dynamically controlled by adjusting the bleeding current. The fabricated LNA shows the bandwidth of 2.5 GHz. The high gain mode shows 17.5 dB gain with $1.7{\sim}2.8\;dB$ NF and consumes 27 mW power and the low gain mode has 14 dB gain with $2.7{\sim}4.0\;dB$ NF and dissipates 1.8 mW from 1.8 V supply.

• International Journal of Control, Automation, and Systems
• /
• v.5 no.2
• /
• pp.161-169
• /
• 2007

The PLL equivalent augmented system incorporated with state feedback is proposed in this paper. The optimal value of filter time constant of loop filter in the phase-locked loop control system and the optimal state feedback gain designed by using linear quadratic regulator approach are derived. This approach allows the PLL control system to employ the large value of the phase-frequency gain $K_d$ and voltage control oscillator gain $K_o$. In designing, the structure of phase-locked loop control system will be rearranged to be a phase-locked loop equivalent augmented system by including the structure of loop filter into the process and by considering the voltage control oscillator as an additional integrator. The designed controller consisting of state feedback gain matrix K and integral gain $k_1$ is an optimal controller. The integral gain $k_1$ related to weighting matrices q and R will be an optimal value for assigning the filter time constant of loop filter. The experimental results in controlling the second-order lag pressure process using two types of loop filters show that the system response is fast without steady-state error, the output disturbance effect rejection is fast and the tracking to step changes is good.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1665-1676
• /
• 2001

The effect of spreading gain control on the throughput of a CDMA slotted ALOHA system is considered. Mobile users transmit packets over a shared channel, and the packets transmitted in the same time slot over the shared channel act as simultaneous access interference (SAI). When using spread-spectrum signal, a CDMA slotted ALOHA channel achieves high probability of capture due to the property of high title resolution, and the bit rate of user information is determined by spreading gain. When the SAI level gets larger, the high value of spreading gain enhances the packet throughput by increasing the probability of a successful packet transmission, while it degrades the of the effective throughput by reducing the user information bits carried within a packer. To solve the problem, we investigated the effect of the capture probability and the SAI level on these system throughputs, and evaluated the throughput performance of the system for each spreading gain control scheme. The results showed that the maximum effective throughput could be achieved with an unified method despite the variation of the SAI level by deriving an optimal value of the spreading gain according to 171e system states.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.959-965
• /
• 2019

In this paper, we design a low noise amplifier to support ka-band satellite communication systems using 65-nm RFCMOS process. The proposed low noise amplifier is designed with high-gain mode and low-gain mode, and is designed to control the gain according to the magnitude of the input signal. In order to reduce the power consumption, the supply voltage of the entire circuit is limited to 1 V or less. We proposed the gain control circuit that consists of the inverter structure. The 3D EM simulator is used to reduce the size of the circuit. The size of the designed amplifier including pad is $0.33mm^2$. The fabricated amplifier has a -7 dB gain control range in 3 dB bandwidth and the reflection coefficient is less than -6 dB in high gain mode and less than -15 dB in low gain mode.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.484-490
• /
• 2016

Full-duplex communication can enhance wireless capacity by enabling simultaneous transmission and reception of the signals on the same frequency spectrum. Such a benefit, however, is only achieved when strong self-interference is well canceled below a sufficient level. To achieve this goal, there have been several approaches for cancellation, each of which is combined with digital-domain cancellation for a higher gain. In this paper, we implement two self-interference cancellation techniques and integrate them with a software defined radio-based wireless communication testbed. Two cancellation techniques (antenna cancellation and noise subtraction) are implemented and the cancellation gain is measured via real experiments. The results show that the gain of the antenna placement technique highly depends on the placement of a receiving antenna and the highest gain is achieved at the expected point, and we show that combining the noise subtraction circuit with the antenna placement further improves the cancellation gain.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.42-43
• /
• 2003

We propose the new gain-flattened filter utilizing tapered silica-based fiber for high capacity WDM optical communication systems. The gain excursion of Gain flattening filters is less than 0.5 dB over the 40 nm($1525nm{\sim}1565nm$).

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.137-140
• /
• 2002

This paper is proposed a 8-bit anolog to digital converter for CMOS image sensor. A anolog to digital converter for CMOS image sensor is required function to control gain. Proposed anolog to digital converter is used frequency divider to control gain. At 3.3 Volt power supply, total static power dissipation is 8mW and programmable gain control range is 30dB. The gain control range can be easily increased with insertion of additional flip-flop at divided-by-N frequency divider circuit.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.621-624
• /
• 2003

In this paper, two Cascode Low Noise Variable Gain Amplifiers are proposed for wide dynamic range and constant Noise Figure for frequency range of 2.4GHz. Designed Variable Gain Low Noise Amplifier are for Wireless Local Area Network (WLAN) applications. A gain is higher than 17dB and the noise figure is approximately 1.3dB and the input VSWR is better than 2:1.