• Speech Sciences
• /
• v.3
• /
• pp.156-166
• /
• 1998

In this paper, I would like to propose a dividing method by estimating the inflection points and the average magnitude energy in speech signals. The method proposed in this paper gave not only a satisfactory solution for the problems on dividing method by zero-crossing rate, but could estimate the feature of the transient period after dividing the starting point and transient period in speech signals before steady state. In the results of the experiment carried out with monosyllabic speech, it was found that even through speech samples indicated in D.C. level, the staring and ending point of the speech signals were exactly divided by the method. In addition to the results, I could compare with the features, such as the length of transient period, the short term energy, the frequency characteristics, in each speech signal.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.788-798
• /
• 2009

This study aims to develop a highly reproducible, optimal frame design algorithm using variations in the curvature of armscye circumference, which will provide the basics for remodeling the 3D human body shape with the concept of reverse design used to develop total contents for the apparel industry. 1. The results of the experiment proved that ratio value was significantly efficient than absolute value of curvature variation to extract feature points in the armscye circumference 2. For the shoulder(1st and 2nd quadrant) and front armhole(3rd quadrant) parts of the armscye circumference, frame remodeling with the positive point of inflection led to the completion of a highly reproducible frame. 3. Similarly, even for the rear armhole part(4th quadrant) in the armscye circumference, it was found that frame remodeling using the positive maximum point of inflection resulted in highly reproducible body shape with the maximum point of inflection situated within the range of split angles $305^{\circ}{\sim}330^{\circ}$, while frame remodeling using simultaneously the two largest points of inflection including maximum point of inflection led to highly reproducible body shape with the maximum point of inflection out of the range $305^{\circ}{\sim}330^{\circ}$. 4. Based upon the optimal frame design algorithm developed in this study, section-specific feature points in the armscye circumference were extracted depending on the rate of curvature variation and remodeling with spline curves was conducted. The results indicate a remarkably high reproducibility(98.6%) and suggest that the algorithm developed in this study is suitable for human body modeling.

• Journal of the Korean Mathematical Society
• /
• v.32 no.4
• /
• pp.753-759
• /
• 1995

Let C be a smooth complex algebraic curve of genus g. For a divisor D on C, dim D means the dimension of the complete linear series $\mid$D$\mid$ containing D, which is the same as the projective dimension of the vector space of meromorphic functions f on C with divisor of poles $(f)_\infty \leq D$.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.5
• /
• pp.195-200
• /
• 2021

Due to the development of video sharing platforms, the amount of video uploads is exploding. Such videos often include various types of music, among which cover songs are included. In order to protect the copyright of music, an algorithm to find the original song of the cover song is essential. However, it is not easy to find the original song because the cover song is a modification of the composition, speed and overall structure of the original song. So far, there is no known effective algorithm for searching the original song of the cover song. In this paper, we propose an algorithm for searching the original song of the cover song using the inflection points of the melody line. Inflection points represent the characteristic points of change in the melody sequence. The proposed algorithm compares the original song and the cover song using the sequence of inflection points for the representative phrase of the original song. Since the characteristics of the representative phrase are used, even if the cover song is a song made by modifying the overall composition of the song, the algorithm's search performance is excellent. Also, since the proposed algorithm uses only the features of the inflection point sequence, the memory usage is very low. The efficiency of the algorithm was verified through performance evaluation.

• KIEE International Transactions on Power Engineering
• /
• v.3A no.2
• /
• pp.85-92
• /
• 2003

When a current transformer (CT) is saturated, the wave-shape of the secondary current is distorted and contains points of inflection, which correspond to the start or end of each saturation period. Discontinuity in the first-difference function of the current arises at points of inflection, where the second and third differences convert into pulses that can be used to detect saturation. This paper describes the design and evaluation of a CT saturation detection technique using the third-difference function and includes the countermeasure for a spike signal. Test results clearly demonstrate that the algorithm successfully detects the start and end of each saturation period irrespective of the remanent flux and magnetization inductance in the saturated region. This paper concludes by describing the results of hardware implementation of the algorithm using a DSP.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.86-97
• /
• 2021

As mechatronic systems have various, complex functions and require high performance, automatic fault detection is necessary for secure operation in manufacturing processes. For conducting automatic and real-time fault detection in modern mechatronic systems, multiple sensor signals are collected by internet of things technologies. Since traditional statistical control charts or machine learning approaches show significant results with unified and solid density models under normal operating states but they have limitations with scattered signal models under normal states, many pattern extraction and matching approaches have been paid attention. Signal discretization-based pattern extraction methods are one of popular signal analyses, which reduce the size of the given datasets as much as possible as well as highlight significant and inherent signal behaviors. Since general pattern extraction methods are usually conducted with a fixed size of time segmentation, they can easily cut off significant behaviors, and consequently the performance of the extracted fault patterns will be reduced. In this regard, adjustable time segmentation is proposed to extract much meaningful fault patterns in multiple sensor signals. By considering inflection points of signals, we determine the optimal cut-points of time segments in each sensor signal. In addition, to clarify the inflection points, we apply Savitzky-golay filter to the original datasets. To validate and verify the performance of the proposed segmentation, the dataset collected from an aircraft engine (provided by NASA prognostics center) is used to fault pattern extraction. As a result, the proposed adjustable time segmentation shows better performance in fault pattern extraction.

• Advances in environmental research
• /
• v.1 no.4
• /
• pp.237-255
• /
• 2012

We review the research literature on relationship between environmental regulation and industrial development in three aspects of environmental regulation and investment, environmental regulation and efficiency, environmental regulation and trade. Indeed, the linkage between environmental regulation and material consumption of industrial system is absent. Environmental regulation is measured as the expenditure share for industrial pollutants abatement, and effluent charge intensity. Using panel-level data from 31 provinces, municipalities and autonomous regions in China, we build correlation models between material consumption and environmental regulation, results show that: (1) there are significant quadratic function relationship between material consumption and environmental regulation. And there is the fact that inflection point exists. (2) On basis of inflection points, we make two remarkable reflections. Firstly, the inflection points are the most important scale to judge reasonability and performance of regulations. Secondly, a Pareto improvement may occur when the regulations achieve a certain target. (3) Both intensities of industrial pollutants abatement expenditure and effluent charge have not yet achieved the expected target in most regions of mainland China at present. And most of regions of material consumption decreasing are distributed in western China. Main reasons lie in the impacts of industrial features as well as the regulations.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.6
• /
• pp.101-108
• /
• 1998

An efficient approach to recognize occluded objects is to detect a number of essential features on the boundary of the unknown shape. The salient points including corner points, tangential points and inflection points are detected by the relation of neighboring pixels of each pixel on the boundaries. Corner points are usually detected in the curvature function and tangential points and inflection points are detected by median filtering the curvature function to avoid the effect of quantization noise as corner points is not sufficient to represent an object with lines and arcs. Then, these salient points are used as features for object matching. Discrete Hopfield Neural Network is used for object matching. Experimental results show that the matching result using salient points is better than those of using corner points only when an object consists of lines and arcs.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.15 no.4
• /
• pp.300-304
• /
• 2015

A low bit rate speech coder based on the non-uniform sampling technique is proposed. The non-uniform sampling technique is based on the detection of inflection points (IP). A speech block is processed by the IP detector, and the detected IP pattern is compared with entries of the IP database. The address of the closest member of the database is transmitted with the energy of the speech block. In the receiver, the decoder reconstructs the speech block using the received address and the energy information of the block. As results, the coder shows fixed data rate contrary to the existing speech coders based on the non-uniform sampling. Through computer simulation, the usefulness of the proposed technique is shown. The SNR performance of the proposed method is approximately 5.27 dB with the data rate of 1.5 kbps.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.4
• /
• pp.276-280
• /
• 2016

A fixed rate speech coder based on the filter bank and the non-uniform sampling technique is proposed. The non-uniform sampling is achieved by the detection of inflection points (IPs). A speech block is band passed by the filter bank, and the subband signals are processed by the IP detector, and the detected IP patterns are compared with entries of the IP database. For each subband signal, the address of the closest member of the database and the energy of the IP pattern are transmitted through channel. In the receiver, the decoder recovers the subband signals using the received addresses and the energy information, and reconstructs the speech via the filter bank summation. As results, the coder shows fixed data rate contrary to the existing speech coders based on the non-uniform sampling. Through computer simulation, the usefulness of the proposed technique is confirmed. The signal-to-noise ratio (SNR) performance of the proposed method is comparable to that of the uniform sampled pulse code modulation (PCM) below 20 kbps data rate.