• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.1-6
• /
• 2009

This study was evaluated the indicators of GRI guideline LA6-LA9 for industrial safety sanitation field on 22 domestic sustainable management reports and 46 overseas reports published by companies in 2007 and 2008, was developed new indicators with emphasis on industrial safety sanitation act, and was assessed whether they are released. As a result, LA6(Percent of total workforce represented in formal joint management-work health and safety committees that help monitor and advise on occupational health and safety programs) was evaluated highest in release ratio on whether to release the reports by each indicator of industrial safety sanitation field using domestic sustainable management report GRI guideline, and in the case of overseas companies, it was evaluated that there is no companies that release all from LA6 through LA9 among GRI guideline, but it was grasped that the ratio of partial release is high. As for the release of indicators was developed with the use of industrial safety sanitation act of 22 domestic companies, the release of indicator No. 1(report and industrial disaster record) and 10(health diagnosis) of industrial safety sanitation act was high. This study is meaningful in that it analyzed the industrial safety sanitation field of sustainable management report(CSR) that has not been attempted so far with the use of new indicators developed with emphasis on GRI guideline and industrial safety sanitation act.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.2
• /
• pp.11-14
• /
• 2004

YBCO thin films have good characteristics for current limiting materials due to compact size and high current carrying capability. But the irregularities and the extreme thin thickness of YBCO films cause some difficulties in simultaneous quench and thermal shock protection. In order to solve these problems, vertical magnetic field generated from solenoid coil was applied to the YBCO element. And also to minimize the inductance caused by the serial connection of magnetic field source with superconducting elements, magnetic field source was separated from the power lines adapting protective current transformer. In this study, electric field-current (E-I) and quench characteristics of YBCO films were analyzed both by electrical measuring method and observations of bubble propagation. From the experiment results, it was revealed that the magnetic fields generated by surrounding coil could induce the uniform quench distribution for all stripes of current limiting units and finally simultaneous quenches were realized in all serial connection of YBCO elements. In addition, the separation of magnetic field source form electrical network could be good solution for simultaneous quench of YBCO films without any unnecessary effect caused by serial connection.

• Journal of Korean Institute of Industrial Engineers
• /
• v.27 no.2
• /
• pp.190-196
• /
• 2001

This study aims to develop three types of the visual fields: stationary field, eye field, and head field, which are classified depending upon the eye and head movements. A visual experiment taking target size, target color, and meridian into account was conducted, in which the L32 orthogonal array was employed. The results showed that target size and meridian were significant at ${\alpha}$=0.01 in all three visual fields. Contrary to expectation, target color was significant at ${\alpha}$=0.10 only in the head field. Furthermore, the differences in size of the head field depending upon four target colors were negligibly small. Three linear regression models were provided to generate visual fields which are appropriate for given visual task's characteristics. In addition, a simple method using adjusting factor was also proposed so that anyone without knowledge for human factors/ergonomics can easily generate and use them when designing or evaluating visual tasks. It is expected that the visual fields presented in this study can be easily used even by non-ergonomic experts in real situations due to their simplicity.

• Journal of Information Technology Applications and Management
• /
• v.26 no.3
• /
• pp.61-80
• /
• 2019

The cooperation between universities and industries is already one of the most important factors driving the national economy in the knowledge-based society of the 21st century represented by the Fourth Industrial Revolution. The Korean government has also been carrying out legal and institutional re-adjustments to promote industrial-university cooperation in line with demands for such changes in the times. However, despite this industry-academic cooperation system, there is still a significant mismatch between industrial demand and the university's workforce development system. By the way, there is a Cooperative Education(CO-OP) in Canada and the United States. It's an innovative link between the university and the industry. The reason is that the CO-OP program not only allows students to gain experience with their majors in the industrial field, but also plays a positive role in improving their specialty expertise. In particular, field information, ideas, and job insights that students acquire through CO-OP also serve as motivation for starting a business beyond employment after graduation. Furthermore, CO-OP experience is an important opportunity for future researchers to come up with commercialized research results that are not separated from the field sites The purpose of this study is to overcome the gap between industrial demand and the college manpower training system, and develop a Korean-style coaching program model as a growth engine for creative talent-building policies, represented by 'creation of start-ups and new industry.' In addition, this study suggested measures that can be applied in real universities. In addition, the study also highlighted that the introduction of CO-OP programs with field practices in Korea could also boost start-ups. Based on the Korean CO-OP program model, the curricula applicable to domestic universities consisted of two types : general and research-oriented university types.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.71-79
• /
• 2023

In the field of agricultural machinery, various on-field tests are conducted to measure design load for optimal design of agricultural equipment. However, field test procedures are costly and time-consuming, and there are many constraints on field soil conditions due to weather, so research on utilizing simulation to overcome these shortcomings is needed. Therefore, this study aimed to model agricultural soils using discrete element method (DEM) software. To simulate draft force, predictions are made according to travel speed and compared to field test results to validate the prediction accuracy. The measured soil properties are used for DEM modeling. In this study, the soil property measurement procedure was designed to measure the physical and mechanical properties. DEM soil model calibration was performed using a virtual vane shear test instead of the repose angle test. The DEM simulation results showed that the prediction accuracy of the draft force was within 4.8% (2.16~6.71%) when compared to the draft force measured by the field test. In addition, it was confirmed that the result was up to 72.51% more accurate than those obtained through theoretical methods for predicting draft force. This study provides useful information for the DEM soil modeling process that considers the working speed from the perspective of agricultural machinery research and it is expected to be utilized in agricultural machinery design research.

• Korean Journal of Agricultural Science
• /
• v.48 no.4
• /
• pp.865-873
• /
• 2021

The purpose of this study is to suggest an improvement plan for the practical evaluation method used to determine the national technical qualification in field of flower design to improve its development. First, an advisory committee was formed, after which comparisons, an analyses and matching were conducted of the currently used national technical qualifications and competency units and the competency unit elements of the National Competency Standards in an effort to strength practical skills and industrial field abilities in the field of flower design. Second, we visited an industrial site to understand the practical and technical aspects as well as the facilities and equipment used in the flower design field. The status of workers in the industrial field in the field of flower design was then analyzed. Through this process, practical examination questions were developed for improve the evaluation method. In addition, to ensure a properly configured result, a pilot test was conducted involving those majoring in the field of flower design. To investigate the feasibility of the developed exam, a survey focusing on targets related to flower design was conducted. Based on the results, by suggesting an improvement plan for the practical evaluation method of national technical qualifications in the field of flower design, it is possible to improve knowledge, technical aspects, and literacy, allowing us to train outstanding technical professionals. In the end, this study can be expected to contribute to the improvement of the flower design industry.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.6
• /
• pp.588-598
• /
• 2015

In this paper, a simulation model for assessing the impact of alternative field service engineer replenishment policies is introduced. The end-to-end supply chain simulation model is created using a discrete-event and agent-based simulation model, which enables accurate description of key individual entities in the investigated supply chain, such as field service engineers. Once the model is validated with the historical data, it is used to assess the impacts of field service engineer replenishment policies for a major printing equipment manufacturing firm.In the case study, newly proposed replenishment policies for post-sale distribution supply chain are assessed for the level of service improvement to end customers.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.4
• /
• pp.368-378
• /
• 2002

As more companies are equipped with data aquisition systems for their products, huge amount of field warranty data has been accumulated. We focus on the case when the field data for a given product comprise with the number of sales and the number of the first failures for each period. The number of censored items and their ages are assumed to be given. This type of data are incomplete in the sense that the age of a failed item is unknown. We construct a model for this type of data and propose an algorithm for nonparametric maximum likelihood estimation of the product reliability. Unlike the nonhomogeneous Poisson process(NHPP) model, our method can handle the data with censored items as well as those with small population. A few examples are investigated to characterize our model, and a real field warranty data set is analyzed by the method.

• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.99-100
• /
• 2008

Composite insulators are rapidly replacing their porcelain counterparts in electrical substation applications. The composite insulator provide technical and safety ad vantages over other types of insulator. These insulators consist of a FRP(Fiber-reinforced polymer), with two metal flanges and silicone rubber. In this paper, we have investigated the influence of electric field different shaped silicone shed under $SF_6$ gas. As a result, shape of silicone rubber does not effected a electric field. However, the shape of shed can be decided the creepage distance.

• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.677-696
• /
• 2017

Purpose: This study suggests that Six Sigma MBB should be used as a key talent to lead the fourth industrial revolution era by training them with big data processing capability. Methods: Through the analysis between articles on the fourth industrial revolution and Six Sigma related papers, common competencies of data scientists and Six Sigma MBBs were identified and the big data analysis capabilities needed for Six Sigma MBB were derived. Then, training was conducted to improve the big data analysis capabilities so that Six Sigma MBB is able to design algorithms required in the fourth industrial revolution era. Results: Six Sigma MBBs, equipped with the knowledge in field site improvement and basic statistics, were provided with 40 hours of big data analysis training and then were made to design a big data algorithm. Positive results were obtained after applying a AI algorithm which could forecast process defects in a field site. Conclusion: Six Sigma MBB equipped with big data capability will make the best talent for the fourth industrial revolution era. A Six Sigma MBB has an excellent capability for improving field sites. Utilizing the competencies of MBB can be a key to success in the fourth industrial revolution. We hope that the results of this study will be shared with many companies and many more improved case studies will arise in the future as a result of this study.