• Journal of Biomedical Engineering Research
• /
• v.19 no.4
• /
• pp.393-401
• /
• 1998

Based on clinical observations, it is suspected that the bone-tendon origin is the site where piratical failure, leading to pathophysiological changes in the humeral epicondyle after repetitive loading, is initiated Mechanical properties and failure patterns of the common extensor and flexor tendons of the humeral epicondyle under static and repetitive loading have not been well documented. Our goal was to determine mechanical properties of failure strength and strain changes, to correlate strain changes and the number of cyclic repetitions, and to identify the failure pattern of bone-tendon specimens of common extensor and flexor tendons of the humeral epicondyle. Mechnaical properties of human cadaver bone-tendon specimens of the common extensor and flexor tendons of the humeral epicondyle were tested under two different loading rates. No statistically significant difference in ultimate tensile strength was found between male and female specimens or between slow (10 mm/sec) and fast elongation (100 mm/sec) rates. However, a statistically significant difference in ultimate tensile strength between the common extensor (1190.0 N/$cm^2{\pm}$388.8) and flexor 1922.0 N/$cm^2{\pm}$764.4)tendons was found (p<0.05). When loads of 25%, 33%, and 41% of the ultimate tensile strength of their contralateral sides were applied, the number of cycles required to reach 24% strain change for the common extersor and flexor tendons were approximately 8,893, 1,907, and 410, respectively. The relationship between cycles and loads was correlated ($R^2$=0.46) Histological observation showed that complete or partial failure after tensile or cyclic loadings occurred at the transitional zone, which is the uncalcified fibrocartilage zone between tendon and bone of the humeral epicondyle. Sequential histological sections revealed that failure initiated at the upper, medial aspect of the extensor carpi radialis brevis tendon origin. Biomechanical and hstological data obtained in this study indicated that the uncalcified fibrocartilage zone at the bone-tendon origin of the common extensor and flexor tendons is the weak anatomical structure of the humeral epicondyle.

• Journal of the Korean Society of Earth Science Education
• /
• v.14 no.2
• /
• pp.136-145
• /
• 2021

The Gifted Education Program is re-constructured into core competency-based program in line with fourth industrial revolution, where talented people with comprehensive ability are required. Therefore, competency-based elementary science gifted education program which is provided from Gifted Education Database(GED) is developed in accordance with 2015 revised edition in science and 5 main core-abilities; scientific thinking ability, scientific investigation ability, scientific problem solving ability, scientific communication ability and scientific participation and lifelong learning ability. This research, which is provided from GED, is focused on earth science area among competency-based elementary science gifted education program and analyse quantitatively and qualitatively how science and core-ability is appeared in 3 programs developed in science area. This research can be another guideline when someone would like to use competency-based earth science gifted education program in gifted education. Also, the purpose of this research is to help suggesting a right direction for competency-based earth science gifted education program. The conclusion based on research problem is as follow; Firstly, in competency-based earth science gifted education program, influence rates of scientific communication ability and scientific thinking ability are highest, where influence rates of scientific investigation ability, scientific problem solving ability and scientific participation and lifelong learning ability are relatively low. Secondly, in competency-based earth science gifted education program, single activity may includes several core-abilities. Following research is quite meaningful in aspect of giving out the information to choose topic in core-ability when using competency-based earth science gifted education program in gifted education. Also by supplementing lowly-influenced ability in competency-based earth science gifted education program, it is expected for gifted students to build scientific core-ability.

• Journal of Environmental Impact Assessment
• /
• v.28 no.2
• /
• pp.101-112
• /
• 2019

Over the last few years, air pollution ($PM_{10}$, $PM_{2.5}$) in the Seoul metropolitan area (SMA) has emerged as one of the most concerned and threatening environmental issues among the residents. It brings about various harmful effects on human health, as well as ecosystem and industrial activities. Governments and individuals pay various costs to mitigate the level of air pollutants. This study aims to empirically find the willingness to pays (WTP) among the parents from different socio-cultural groups - international and domestic groups to mitigate air pollution ($PM_{10}$, $PM_{2.5}$) in their residential area. Contingent Valuation Methods (CVM) is used with employing single-bounded dichotomous choice technique to elicit the respondent's WTP. Using tobit (censored regression) and probit models, the monthly mean WTP of the pooled sample for green electricity which contributes to improve air quality in the region was estimated as 3,993 KRW (3.58 USD). However, the mean WTP between the international group and domestic group through a sub-sample analysis shows broad distinction as 3,325KRW (2.98 USD) and 4,449 KRW (3.98 USD) respectively. This is because that socio-cultural characteristics of each group such as socio-economic status, personal experience, trust in institutions and worldview are differently associated with the WTP. Based on the results, the society needs to raise awareness of lay people to find a strong linkage between the current PM issue and green electricity. Also, it needs to improve trust in the government's pollution abatement policy to mobilize more assertive participation of the people from different socio-cultural background.

• Journal of Intelligence and Information Systems
• /
• v.25 no.1
• /
• pp.43-61
• /
• 2019

Development of technologies in artificial intelligence has been rapidly increasing with the Fourth Industrial Revolution, and researches related to AI have been actively conducted in a variety of fields such as autonomous vehicles, natural language processing, and robotics. These researches have been focused on solving cognitive problems such as learning and problem solving related to human intelligence from the 1950s. The field of artificial intelligence has achieved more technological advance than ever, due to recent interest in technology and research on various algorithms. The knowledge-based system is a sub-domain of artificial intelligence, and it aims to enable artificial intelligence agents to make decisions by using machine-readable and processible knowledge constructed from complex and informal human knowledge and rules in various fields. A knowledge base is used to optimize information collection, organization, and retrieval, and recently it is used with statistical artificial intelligence such as machine learning. Recently, the purpose of the knowledge base is to express, publish, and share knowledge on the web by describing and connecting web resources such as pages and data. These knowledge bases are used for intelligent processing in various fields of artificial intelligence such as question answering system of the smart speaker. However, building a useful knowledge base is a time-consuming task and still requires a lot of effort of the experts. In recent years, many kinds of research and technologies of knowledge based artificial intelligence use DBpedia that is one of the biggest knowledge base aiming to extract structured content from the various information of Wikipedia. DBpedia contains various information extracted from Wikipedia such as a title, categories, and links, but the most useful knowledge is from infobox of Wikipedia that presents a summary of some unifying aspect created by users. These knowledge are created by the mapping rule between infobox structures and DBpedia ontology schema defined in DBpedia Extraction Framework. In this way, DBpedia can expect high reliability in terms of accuracy of knowledge by using the method of generating knowledge from semi-structured infobox data created by users. However, since only about 50% of all wiki pages contain infobox in Korean Wikipedia, DBpedia has limitations in term of knowledge scalability. This paper proposes a method to extract knowledge from text documents according to the ontology schema using machine learning. In order to demonstrate the appropriateness of this method, we explain a knowledge extraction model according to the DBpedia ontology schema by learning Wikipedia infoboxes. Our knowledge extraction model consists of three steps, document classification as ontology classes, proper sentence classification to extract triples, and value selection and transformation into RDF triple structure. The structure of Wikipedia infobox are defined as infobox templates that provide standardized information across related articles, and DBpedia ontology schema can be mapped these infobox templates. Based on these mapping relations, we classify the input document according to infobox categories which means ontology classes. After determining the classification of the input document, we classify the appropriate sentence according to attributes belonging to the classification. Finally, we extract knowledge from sentences that are classified as appropriate, and we convert knowledge into a form of triples. In order to train models, we generated training data set from Wikipedia dump using a method to add BIO tags to sentences, so we trained about 200 classes and about 2,500 relations for extracting knowledge. Furthermore, we evaluated comparative experiments of CRF and Bi-LSTM-CRF for the knowledge extraction process. Through this proposed process, it is possible to utilize structured knowledge by extracting knowledge according to the ontology schema from text documents. In addition, this methodology can significantly reduce the effort of the experts to construct instances according to the ontology schema.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.3
• /
• pp.105-119
• /
• 2021

The innovation cluster is formed by cooperation and networking among a number of actors, including companies, universities, research institutes, government and other supporting organizations, but the main subject of innovation in the venture ecosystem, which can be said to be the core of the innovation cluster, is the enterprise. Therefore, enterprises in innovation cluster can be seen as a major user of the innovation cluster policy. In order for the policy to be executed smoothly, policy acceptance is important. However, existing research on policy prioritization tends to be centered on policy providers, so it is necessary to check them from the perspective of policy users. Accordingly, this study conducted discussions from a two-way perspective to establish the correct policy direction through a balanced perspective between a policy provider-centered top-down perspective and a policy user's bottom-up perspective. First, the factors for activating the innovation cluster (three factors in the first level and 14 factors in the second level) were derived through prior research and expert interviews. After that, the importance of the factors for activating the innovation cluster was analyzed using AHP (Analytic Hierarchy Process) for the policy provider group and the user group in the Daedeok Innopolis, a representative case of innovation cluster policy. As a result of analyzing the importance of the innovation cluster activation factors from the perspectives of policy providers and users, some similarities were also seen, but overall differences in mutual perception were found. It was found that the policy provider group focused on innovation creation factors, while the policy user group viewed innovation creation, clusters, and industrial location factors from a more balanced perspective. This study is meaningful in that it deals with both perspectives in a balanced way by expanding the targets from the existing policy provider-centered research to policy users. In addition, practical contributions exist in the aspect of providing basic data so that policies can be carried out based on corporate needs in fostering innovation clusters.

• Journal of the Daesoon Academy of Sciences
• /
• v.35
• /
• pp.39-71
• /
• 2020

Ever since gaining liberation in 1945, Korean society has constantly recalled memories of Japan's invasion and Korea's anti-Japanese movements for an independent state (AMIS). In the process, a small number of new religious groups were also identified as main subjects within AMIS. However, the logic necessary to connect these religious groups with AMIS was still weak. In order to solve this situation academically, the purpose of this article is to illuminate the activities of Mugeukdo (無極道) and Jo Jeongsan (趙鼎山) through the lens of AMIS and to reflect on the issues that will arise when linking the religion with AMIS. Regarding this purpose, this article analyzed the internal and external data collected by Daesoon Jinrihoe (大巡眞理會) about Jo Jeongsan and Mugeukdo's activities linked to AMIS. Later, this paper presents several tasks for future research on this subject matter. Specifically, according to Chapter II, the AMIS of Jo Jeongsan and Mugeukdo were generally centered on resistance at the family level, Jo Jeongsan's order to participate in the March 1st Movement, and Mugeukdo's industrial activities. In Chapter III, I reviewed the contents of Chapter II using Daesoon Jinrihoe's external materials. According to the results of the review, future research is required to discover and cross-check materials related to the AMIS of Jo Jeongsan and Mugeukdo believers. Likewise, further research is needed to highlight the theory of the enthronement of emperor (天子登極說) and the Great Opening of the later world (後天開闢) in terms of AMIS. These efforts can make contributions that increase the credibility of Daesoon Jinrihoe's internal data on the AMIS of Jo Jeongsan and Mugeukdo and expand the periphery of AMIS as it relates to certain religious groups. Subsequently, in Chapter IV, I present three items for reflecting upon the connection between certain religious groups and AMIS. The first is that criteria for establishing the category of AMIS is necessary to determine whether religious activities can be included. Second, reductionist approaches make it difficult to explain the reasons why some of the people who participated in AMIS did so while forming 'new religious movements,' and why these groups have maintained their religious identity even after liberation was achieved in 1945. Third, it is necessary to distinguish between the primary and the secondary dimensions to elaborate on the connection between these religions and AMIS. This means that researchers should be expected to look at whether the activities in question are based on a religious worldview and whether the goal of the activities is the realization of AMIS or the implementation of some aspect of that religious worldview. In the future, considering the mechanisms that make AMIS memorable in Korea, religious groups and religious studies should take greater interest in discovering and accumulating data that facilitates research on these topics. At the same time, effort should be made to find the basis for AMIS within religious worldviews. It can also be made possible through specific interest in further elaboration on the various AMIS-related activities of Jo Jeongsan and Mugeukdo.

• Journal of Christian Education in Korea
• /
• v.70
• /
• pp.37-74
• /
• 2022

COVID-19, which occurred in Wuhan, China, made it difficult for Korean churches to face to face worship, therefore metaverse emerged as an alternative to solving these problems. metaverse is forming various platforms through technology expressed in 3I(Immersion, Interactive, virtual Image). The purpose of this study is to analyze the application plan of Christian education by applying metaverse technologies to Christian education. In order to achieve the purpose of this study, first, the definition, type, platform, and technology of the metaverse are presented to examine the key of the metaverse, second, in order to analyze the church from the theological educational aspect, the essence of the church, the mission of the church, and the metaverse church are examined, third in order to apply the metaverse to Christian education, it is classified into worship through the metaverse, education through the metaverse, service through the metaverse, the christian relationship through the metaverse, and missions through the metaverse. The application plan of the metaverse for Christian education is that first, worship can be held through metaverse. Second, education can be performed through the metaverse. Third, the metaverse can be used to fulfill the mission of service. Fourth, through the metaverse, christian can fellowship through the metaverse. Fifth, the missionary mission can be carried out through the metaverse. In conclusion, metaverse is still in the development stage, but various programs should be developed to achieve the purpose of Christian education by utilizing various platforms developed so far and utilizing the advantages of the platform. In particular, the Korean church will be able to utilize various programs such as Sunday worship, Sunday school, youth retreat, QT, Bible school, and pilgrimage through the metaverse to make good use of the characteristics of the metaverse. In addition, metaverse is an extended reality(XR) that integrates VR, AR, and MR, and its strength is an engagement in creative Christian educational activities out of the original Christian education. In the future, metaverse technology can be applied to Christian education in various ways as the fourth industrial technology is developing.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.378-387
• /
• 2023

Petrochemical is an energy consuming industry that consumes about 30% of total industrial energy consumption and is a representative carbon dioxide (CO₂) emission source. Among them, the Naphtha Cracking Center (NCC), which produces ethylene, propylene, propane and mixed C4, consumes large amounts of energy and emits significant amounts of CO₂. For this reason, an integrated techno economic- environmental impact assessment aimed at reducing energy consumption and environmental impact factors is necessary to ensure efficiency in terms of economics and environment. This study aims to analyze the efficiency of the heat exchanger network used in the existing NCC base on the pinch analysis and select an improvement plan that can reduced energy consumption. In order to reduces the utility consumption in the process, an optimal heat exchanger network considering the high-temperature and low-temperature stream was derived, and the economic evaluation was conducted by considering the trade-off between the reduction in utility consumption and the increase in heat exchanger installation cost. In addition, an environmental impact assessment was conducted on the reduced CO₂ emission in consideration of the environmental aspect, and the economic environmental impact assessment used the payback period to recover the invested funds to come up with an energy saving plan that can be applied based on the actual process. As a result of considering the economic-environmental impact assessment, when the environmental impact assessment was not considered, it was 4.29 months, 3.21 months, and 3.39 months for each case, and when considering the environmental impact assessment, it was 4.24 months, 3.17 months, and 3.35 months for each case. These results appeared equally both when the environmental impact assessment was not include and when it was include. In addition, a sensitivity analysis was conducted for each case to determine how important factors affect the payback period. As a result of the sensitivity analysis, the cost of the heat exchanger was identified as a major factor influencing the overall cost.

• Korean small business review
• /
• v.32 no.1
• /
• pp.65-87
• /
• 2010

With the advent of knowledge-based society, the revitalization of technological innovation type SMEs, termed "inno-biz" hereafter, has been globally recognized as a government policymakers' primary concern in strengthening national competitiveness, and much effort is being put into establishing polices of boosting the start-ups and innovation capability of SMEs. Especially, in that the inno-biz enables national economy to get vitalized by widening world markets with its superior technology, and thus, taking the initiative of extremely competitive world markets, its growth and development has greater significance. In the case of Korea, the government has been maintaining the policies since the late 1990s of stimulating the growth of SMEs as well as building various infrastructures to foster the start-ups of the SMEs such as venture businesses with high technology. In addition, since the enactment of "Innovation Promotion Law for SMEs" in 2001, the government has been accelerating the policies of prioritizing the growth and development of inno-biz. So, for the sound growth and development of Korean inno-biz, this paper intends to offer effective management strategies for SMEs and suggest proper policies for the government, by researching into the effect of technological innovation capability and technology commercialization capability as the primary business resources on business performance in Korean SMEs in the light of market information orientation. The research is carried out on Korean companies characterized as inno-biz. On the basis of OSLO manual and prior studies, the research categorizes their status. R&D capability, technology accumulation capability and technological innovation system are categorized into technological innovation capability; product development capability, manufacturing capability and marketing capability into technology commercialization capability; and increase in product competitiveness and merits for new technology and/or product development into business performance. Then the effect of each component on business performance is substantially analyzed. In addition, the mediation effect of technological innovation and technology commercialization capability on business performance is observed by the use of the market information orientation as a parameter. The following hypotheses are proposed. H1 : Technology innovation capability will positively influence business performance. H1-1 : R&D capability will positively influence product competitiveness. H1-2 : R&D capability will positively influence merits for new technology and/or product development into business performance. H1-3 : Technology accumulation capability will positively influence product competitiveness. H1-4 : Technology accumulation capability will positively influence merits for new technology and/or product development into business performance. H1-5 : Technological innovation system will positively influence product competitiveness. H1-6 : Technological innovation system will positively influence merits for new technology and/or product development into business performance. H2 : Technology commercializing capability will positively influence business performance. H2-1 : Product development capability will positively influence product competitiveness. H2-2 : Product development capability will positively influence merits for new technology and/or product development into business performance. H2-3 : Manufacturing capability will positively influence product competitiveness. H2-4 : Manufacturing capability will positively influence merits for new technology and/or product development into business performance. H2-5 : Marketing capability will positively influence product competitiveness. H2-6 : Marketing capability will positively influence merits for new technology and/or product development into business performance. H3 : Technology innovation capability will positively influence market information orientation. H3-1 : R&D capability will positively influence information generation. H3-2 : R&D capability will positively influence information diffusion. H3-3 : R&D capability will positively influence information response. H3-4 : Technology accumulation capability will positively influence information generation. H3-5 : Technology accumulation capability will positively influence information diffusion. H3-6 : Technology accumulation capability will positively influence information response. H3-7 : Technological innovation system will positively influence information generation. H3-8 : Technological innovation system will positively influence information diffusion. H3-9 : Technological innovation system will positively influence information response. H4 : Technology commercialization capability will positively influence market information orientation. H4-1 : Product development capability will positively influence information generation. H4-2 : Product development capability will positively influence information diffusion. H4-3 : Product development capability will positively influence information response. H4-4 : Manufacturing capability will positively influence information generation. H4-5 : Manufacturing capability will positively influence information diffusion. H4-6 : Manufacturing capability will positively influence information response. H4-7 : Marketing capability will positively influence information generation. H4-8 : Marketing capability will positively influence information diffusion. H4-9 : Marketing capability will positively influence information response. H5 : Market information orientation will positively influence business performance. H5-1 : Information generation will positively influence product competitiveness. H5-2 : Information generation will positively influence merits for new technology and/or product development into business performance. H5-3 : Information diffusion will positively influence product competitiveness. H5-4 : Information diffusion will positively influence merits for new technology and/or product development into business performance. H5-5 : Information response will positively influence product competitiveness. H5-6 : Information response will positively influence merits for new technology and/or product development into business performance. H6 : Market information orientation will mediate the relationship between technology innovation capability and business performance. H7 : Market information orientation will mediate the relationship between technology commercializing capability and business performance. The followings are the research results : First, as for the effect of technological innovation on business performance, the technology accumulation capability and technological innovating system have a positive effect on increase in product competitiveness and merits for new technology and/or product development, while R&D capability has little effect on business performance. Second, as for the effect of technology commercialization capability on business performance, the effect of manufacturing capability is relatively greater than that of merits for new technology and/or product development. Third, the mediation effect of market information orientation is identified to exist partially in information generation, information diffusion and information response. Judging from these results, the following analysis can be made : On Increase in product competitiveness, directly related to successful technology commercialization of technology, management capability including technological innovation system, manufacturing capability and marketing capability has a relatively strong effect. On merits for new technology and/or product development, on the other hand, capability in technological aspect including R&D capability, technology accumulation capability and product development capability has relatively strong effect. Besides, in the cast of market information orientation, the level of information diffusion within an organization plays and important role in new technology and/or product development. Also, for commercial success like increase in product competitiveness, the level of information response is primarily required. Accordingly, the following policies are suggested : First, as the effect of technological innovation capability and technology commercialization capability on business performance differs among SMEs; in order for SMEs to secure competitiveness, the government has to establish microscopic policies for SMEs which meet their needs and characteristics. Especially, the SMEs lacking in capital and labor are required to map out management strategies of focusing their resources primarily on their strengths. And the government needs to set up policies for SMEs, not from its macro-scaled standpoint, but from the selective and concentrative one that meets the needs and characteristics of respective SMEs. Second, systematic infrastructures are urgently required which lead technological success to commercial success. Namely, as technological merits at respective SME levels do not always guarantee commercial success, the government should make and effort to build systematic infrastructures including encouragement of M&A or technology trade, systematic support for protecting intellectual property, furtherance of business incubating and industrial clusters for strengthening academic-industrial network, and revitalization of technology financing, in order to make successful commercialization from technological success. Finally, the effort to innovate technology, R&D, for example, is essential to future national competitiveness, but its result is often prolonged. So the government needs continuous concern and funding for basic science, in order to maximize technological innovation capability. Indeed the government needs to examine continuously whether technological innovation capability or technological success leads satisfactorily to commercial success in market economic system. It is because, when the transition fails, it should be left to the government.

• Journal of Intelligence and Information Systems
• /
• v.19 no.4
• /
• pp.21-37
• /
• 2013

Recently, as the advent of the knowledge-based society, there are more people getting interested in the intellectual property. Especially, the ICT companies leading the high-tech industry are working hard to strive for systematic management of intellectual property. As we know, the patent information represents the intellectual capital of the company. Also now the quantitative analysis on the continuously accumulated patent information becomes possible. The analysis at various levels becomes also possible by utilizing the patent information, ranging from the patent level to the enterprise level, industrial level and country level. Through the patent information, we can identify the technology status and analyze the impact of the performance. We are also able to find out the flow of the knowledge through the network analysis. By that, we can not only identify the changes in technology, but also predict the direction of the future research. In the field using the network analysis there are two important analyses which utilize the patent citation information; citation indicator analysis utilizing the frequency of the citation and network analysis based on the citation relationships. Furthermore, this study analyzes whether there are any impacts between the size of the company and patent citation relationships. 74 S&P 500 registered companies that provide IT and communication services are selected for this study. In order to determine the relationship of patent citation between the companies, the patent citation in 2009 and 2010 is collected and sociomatrices which show the patent citation relationship between the companies are created. In addition, the companies' total assets are collected as an index of company size. The distance between companies is defined as the absolute value of the difference between the total assets. And simple differences are considered to be described as the hierarchy of the company. The QAP Correlation analysis and MR-QAP analysis is carried out by using the distance and hierarchy between companies, and also the sociomatrices that shows the patent citation in 2009 and 2010. Through the result of QAP Correlation analysis, the patent citation relationship between companies in the 2009's company's patent citation network and the 2010's company's patent citation network shows the highest correlation. In addition, positive correlation is shown in the patent citation relationships between companies and the distance between companies. This is because the patent citation relationship is increased when there is a difference of size between companies. Not only that, negative correlation is found through the analysis using the patent citation relationship between companies and the hierarchy between companies. Relatively it is indicated that there is a high evaluation about the patent of the higher tier companies influenced toward the lower tier companies. MR-QAP analysis is carried out as follow. The sociomatrix that is generated by using the year 2010 patent citation relationship is used as the dependent variable. Additionally the 2009's company's patent citation network and the distance and hierarchy networks between the companies are used as the independent variables. This study performed MR-QAP analysis to find the main factors influencing the patent citation relationship between the companies in 2010. The analysis results show that all independent variables have positively influenced the 2010's patent citation relationship between the companies. In particular, the 2009's patent citation relationship between the companies has the most significant impact on the 2010's, which means that there is consecutiveness regarding the patent citation relationships. Through the result of QAP correlation analysis and MR-QAP analysis, the patent citation relationship between companies is affected by the size of the companies. But the most significant impact is the patent citation relationships that had been done in the past. The reason why we need to maintain the patent citation relationship between companies is it might be important in the use of strategic aspect of the companies to look into relationships to share intellectual property between each other, also seen as an important auxiliary of the partner companies to cooperate with.