• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.1
• /
• pp.65-72
• /
• 2018

This study analyzed the condition of marine accident and disaster rate of crew of Korean fishing vessels by vessel type, and checked the Australian safety management system and relevant regulation in Korea to suggest measures to build coastal/offshore fishing vessel safety management system in Korean coastal/offshore fishery. As a result, the power and production amount of Korean coastal/offshore fishing vessel is consistently decreasing while marine accident is increasing. Disaster rate of crew was higher than land industry, especially, the disaster rate of coastal/offshore fishing vessel was very high (100.0‰). Australia applies safety management system differed by vessel type and operation waters which fully considers the characteristics of pertinent vessel. The average accident rate of fishing vessels with gross tonnage over 20 tons among the Korean coastal/offshore fishing vessel was 13.6%, which was significantly higher than fishing vessels with gross tonnage below 20 tons (1.4%). Such result indicates it is urgent to implement safety management system to fishing vessel with gross tonnage over 20 tons and introduce fishing vessel safety supervisor. Establishing safety management system of coastal/offshore fishing vessel will contribute to consistent industrial development by achieving the general goal of reducing marine accident and spreading safety culture.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.2
• /
• pp.138-146
• /
• 2020

Stow net fishery is one of the fishery with high fishing work accidents in southwestern sea of Korea. We conducted to serve as basic data for improving the healthy and safe working environment of fisher using risk assessment process (ISO45001) with fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) from 2016 to 2018. The average occurrence rate of victim in this fishery was 9.04%, 16.7 times more than such rate in all industries. In addition, the average fatality rate was found to have a very serious level management to 31.06‱, 27.7 times more than such rate in all industries. The safety hazards of stow net fishery was more likely to occur by other general industrial groups, with more severe consequences after the accident. According to 4M analysis, 58.6% of all accidents were caused by human factors, 24.0% by environmental factors, 16.0% by mechanical factors, and 1.5% by managerial factors, respectively. The occurrence frequency by accident type was the highest in 187 cases (32.2%) for struck by object, 158 cases (27.2%) for slipping, and 94 cases (16.2%) for being in contact with machinery. Severity is the highest for others such as diseases etc., in the order of being struck by object, being in contact with machinery, falling from above slipping, collapsing, bumping, and burning. Being struck by object, being in contact with machinery, and slipping are high-risk groups, falling from above others, bumping, and burning are medium-risk groups based on the risk assessment using the occurrence frequency and severity of accident. The obtained results are expected to contribute to the safe operation environment subsidy for fishing crews on the stow net fishing vessel.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.8
• /
• pp.157-168
• /
• 2019

Modular Construction is regarded as having enhanced safety compared to traditional construction since most of modular manufacturing process in plants. Unlike general consideration for safety in modular construction, several industrial accident data and studies have pointed out that the accident rate of modular construction is not enough less as much as the practitioners have expected. It means that there is a clear need for improvement of safety management in modular construction. To enhance safety, it is necessary to identify the type and cause of accident through accident cases in order to prevent safety accident in advance. In this consideration, this study analyzed the types and causes of accidents through root cause analysis procedure with accident cases of U.S. OSHA. The classification was carried out in the order of process type, accident type and cause of accident. By following the classification criteria in this study, the causal factor was derived and the root cause map was created. Based on the analysis results, cross-analysis was conducted and it is shown that activity characteristics of modular construction are related to safety accidents. In addition, prevention methods to reduce safety accident by major activity are presented in terms of organizational, educational and technical aspects. This study contributes that the result can be used as the basic safety management in the manufacturing and construction process of modular construction.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.103-112
• /
• 2012

The construction industry in Korea after the Korean-war has evolved until these days. But the construction industry accident severity rate and frequency is over then the All industry rate. This study analyzed the 'Disaster Statistical Yearbook' of the Korea Occupational Safety and Health Agency, based on the factors that affect construction accidents that is selected and fined the some factors the construction Disaster Prevention Factors. This study will develop the methodology for analyzes that the national qualification is effected to the construction industrial machine disaster prevention status. It suggest two ways to the establishment of disaster trends. First way is the disaster quantitative analysis and second way is comparing the statistical data and the analysis of expert opinion.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.2
• /
• pp.9-17
• /
• 2016

In addition to improving economic growth and development of advanced production technology brings many benefits to our society, but if the growth of this still has the shadow of accidents exists. In particular, the construction site has seen a significantly higher accident rate figures despite efforts on disaster prevention. Among the various methods of reducing the need for disaster safety education industry it has become very stressed its importance through many studies. When a disaster causes significant share of the construction industry due to the lack of educational causes, including technical causes, managerial causes, classification and educational causes of this ateumyeo safety awareness and knowledge account for large proportion. In the health and safety education, centered on the subjects of education supervisors will be able to reduce the real and effective industrial disaster education should be run.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.11a
• /
• pp.1-13
• /
• 2003

Domestic industry calamity rate did decrease in large numbers by many efforts of the safety and the health organizations. Nevertheless domestic industrial accident level is low yet among the OECD countries. Domestic small and medium enterprises is in trend that industrial accident is increased by deterioration of hardware, unpreparedness of safety equipments. But, Domestic small and medium enterprises' safety and health education had not been utilized so far effectively. This research groped efficient operation model of the safety and the health education through the survey about a solution for problems of education that is enforced in small and medium enterprises to three groups of workers and safety and health administrators and managers. Compared domestic safety and health educational system and advanced foreign educational system. And, analyze problems about domestic small and medium enterprise's safety and health education and presented a solution. Finally, presented efficient operation model of the safety and the health education suitable to domestic medium and small enterprises.

• Journal of the Korean Society of Safety
• /
• v.28 no.6
• /
• pp.1-5
• /
• 2013

Notorious press machine bothers employers by causing so many industrial accidents which are mostly of caught-in or between type. In 2008, press machines caused 1665 cases of such type of accidents, which reached about 11% of all those. Even though various approaches has been adopted to prevent those press machine accidents, up to now, no one was found to be satisfactory. In this study, two kinds of companies, accident-occurred and accident-free by press machine, were surveyed to find out positive and negative factors for accidents prevention. 400 companies which experienced accidents in 2008 and 200 companies which did not experience accident at all during the same period were selected for this survey. Most of these companies are small companies that employ less than 50 employees. Even though small companies are exempted from legal obligations to have a safety management system for accident prevention, we surveyed about safety management systems of those companies because of its crucial importance for accident prevention including whether they appointed safety managers and various supervisors. Awareness and efforts for safety of employers and employees were also measured. Results were analysed by the method of cross tabulation analysis. Main findings of this study are as follows. Most accident-occurred companies did not appoint any safety manager or supervisor. While it is recommended that the workplace of high accident rate have a safety manager. In addition, as less employers' effort for safety was made in accident-occurred companies in order to prevent accidents during press processing, the author proposes an amendment to the relevant law. Finally, the most referred reason for the negligence of hazard is the cumbersomeness in installing safeguards.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.119-125
• /
• 2009

We predict the earthquake rate in Korea following Bayesian approach. We make a model that can utilize the data to predict other levels of earthquake. An event tree model which is a frequently used graphical tool in describing accident initiation and escalation to more severe accident is transformed into an influence diagram model. Prior distributions for earthquake occurrence rate and probabilities to escalating to more severe earthquakes are assumed and likelihood of number of earthquake in a given period of time is assessed. And then posterior distributions are obtained based on observed data. We find that the minor level of earthquake is increasing while major level of earthquake is less likely.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.1
• /
• pp.41-48
• /
• 2008

On the basis of total page, the coverage rate of education of safety and health in textbooks of elementary school was approximately 10%. In middle school, the contents of safety education were addressed mainly in subject of chemistry below about 5% of coverage rate whereas the contents of health education appeared mainly in subject of athletics below about 15% of coverage rate. Similarly, the contents of safety education and health education in textbooks of high school were indicated mainly in the subjects of chemistry and athletics, showing below about 5% and 30% of coverage rate, respectively. In conclusion, the education level of safety and health in textbooks was generally lower compared to other contents. The coverage rate of safety education was relatively lower than health education, which implicates that extensive contents related to safety education are needed to be added to textbooks in order to establish preliminary attitude for preventing workplace accident.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.151-160
• /
• 2011

There have been many efforts to prevent accidents in Korea for the last 25 years. Many measures in the area of hardware sciences including electrical, mechanical, chemical engineering, etc. were applied to eliminate or at least reduce causes of accidents. However, the accidents rate has not been reduced much despite of these measures. This research aimed to find real causes of these accidents and to suggest a comprehensive model that can mainly be applied to industrial fields to find potential or existence of human errors during the pre-installation stage or after an accident. We tried to explain sequences of an operator's information process that might cause human errors on one hand, and life cycle stages of facilities involved when human errors occur on the other hand. With this comprehensive model presented in this research, one can follow up the sequence of human errors caused by operators. Further, errors made at the design stage which could be a main cause of accidents can be tracked. It is recommended that this comprehensive model should be used to prevent human errors in industrial fields since safety personnel can easily find out errors or error potentials through the life cycle stages of manmachine facilities.