• Journal of information and communication convergence engineering
• /
• 제14권4호
• /
• pp.268-271
• /
• 2016

An efficient inductive switching noise suppression technique for mixed-signal integrated circuits (ICs) using standard CMOS digital technology is proposed. The proposed design technique uses a parallel RC circuit, which provides a damping path for the switching noise. The proposed design technique is used for designing a mixed-signal circuit composed of a ring oscillator, a digital output buffer, and an analog noise sensor node for $0.13-{\mu}m$ CMOS digital IC technology. Simulation results show a 47% reduction in the on-chip inductive switching noise coupling from the noisy digital to the analog blocks in the same substrate without an additional propagation delay. The increased power consumption due to the damping resistor is only 67% of that of the conventional source damping technique. This design can be widely used for any kind of analog and high frequency digital mixed-signal circuits in CMOS technology

• 비파괴검사학회지
• /
• 제28권5호
• /
• pp.395-400
• /
• 2008

비자성 및 자성 금속 시편의 표면 결함을 검출하기 위하여 교류자기장을 이용하였다. 비파괴 센서 프로브는 자성 박막 요크와 박막형 코일로 구성된 신호 검출부와 시편에 교류자기장을 인가하기 위한 단일 직선을 이용한 여기 코일로 이루어져 있다. 박막형 유도 코일 센서는 스퍼터, 전기도금, 건식 식각과 사진식각 공정을 이용하여 제작되었다. 시편에 교류자기장을 인가하기 위하여 0.7 MHz-1.8 MHz 주파수 영역에서 0.1A-1.0A의 교류전류를 여기코일에 인가하였다. 센서의 특성은 최소 0.5 mm의 깊이와 폭을 가진 인위적인 슬릿 형태 비자성체 Al과 자성체 FeC 결함 시편을 이용하여 측정하였다. 측정된 신호는 높은 감도를 갖고 결함 시편위의 슬릿결함의 위치와 일치함을 알 수 있었다. 또한 박막형 유도 코일 센서를 이용하여 마이크론 크기의 표면 결함을 가진 자성체 FeC의 시편을 비접촉 스캔하여 측정된 유도전압의 변화를 이미지화 하였으며 그 결과를 광학적 이미지와 비교하였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.245-246
• /
• 1998

AMB(Active Magnetic Bearing) systems are popularly used in various areas. In biomedical engineering applications it is a key part of magnetically suspended rotary blood pumps. The special advantage of AMBs is that they enable the rotor to revolve with no physical contact and provide rotary blood pumps with better performances such as low hemolysis level. Fundamentally, AMB systems consist of three parts, proximity sensors for distance detection, microprocessor for control algorithm and power amplifiers for actuating electromagnets. We have developed an inductive type proximity sensor with satisfactory characteristics that can be used in AMB systems. Frequency response was flat at least up to 10 kHz and sensitivity, resolution$(>5{\mu}m)$ and sensing range(<5mm) of the sensor could be adjustable for various purposes. The characteristics of the completed model showed to have satisfactory behaviors compared with the commercially available ones that already appeared to have reliable behaviors in AMB systems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.987-992
• /
• 2000

In a high speed spindle system, it is very important to monitor the operation of the spindle to prevent catastrophic damage to the system. Widely used sensors for monitoring are eddy-current and capacitive types. These sensors provide high accuracy of monitoring, but their steep prices lead to expensive high speed spindle systems. The main goal of our research is to develop technology for producing high speed spindle system utilizing magnetic bearings. As active magnetic bearings require position sensors for feedback control, a noncontact position sensor is being developed as a part of this main goal. Once developed, it will contribute to affordable high speed spindle system. This paper describes the selection process of the sensor types and the design of the driving circuit. We also report the experimental results that characterize the static and dynamic performances of the inductive sensor.

• 비파괴검사학회지
• /
• 제28권6호
• /
• pp.524-530
• /
• 2008

The spin valve tunneling magnetoresistance (SV-TMR) sensor performance is analyzed using Stoner-Wohlfarth model for the detection of eddy current signals in nondestructive testing applications. The SV-TMR response in terms of the applied AC magnetic field dominantly generates the second harmonic amplitude in hard axis direction. The second harmonic eddy current signal detection using SV-TMR sensor shows higher performance than that of the coil sensor at lower frequencies. The SV-TMR sensor with high sensitivity gives a good solution to improve the low frequency performance in comparison with the inductive coil sensors. Therefore, the low frequency eddy current techniques based on SV-TMR sensors are specially useful in the detection of hidden defects, and it can be applied to detect the deeply embedded flaws or discontinuities in the conductive materials.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.32-37
• /
• 2000

In a high speed spindle system, it is very important to monitor the operation of the spindle to prevent catastrophic damage to the system. Widely used sensors for monitoring are eddy-current and capacitive types. These sensors provide high accuracy of monitoring, but their steep prices lead to expensive high speed spindle system. The main god of our research is to develop technology to produce high speed spindle system utilizing magnetic bearings. As active magnetic bearings require position sensors for feedback control, a noncontact position sensor is bang developed as a part of this main goal. Once developed, it will contribute to affordable high speed spindle system. In this paper, we report the selection process of the sensor types and the experimental results with driving circuits.

• 한국정밀공학회지
• /
• 제19권3호
• /
• pp.39-45
• /
• 2002

A simple and low cost stylus profiler made of ferrite cores is developed. The devised profiler consists of a contact probe, a measuring transducer, a signal processing unit, and a motorized stage. The contact probe attached to 4-bar spring maintains sufficient stiffness to protect disturbances. An overlap-area type inductive position sensing system is selected as a measuring transducer, which has high sensitivity, repeatability and linearity. The transducer is composed of coil bundles and ferrite cores which have good electromagnetic characteristics in spite of low cost. The repeatability of the profiler with the proposed inductive sensing system is better than 50nm. Experimental results are shown that the proposed profiler can measure the line or 3D profile of an object with sub-micron features.

• 한국지능시스템학회논문지
• /
• 제15권7호
• /
• pp.805-812
• /
• 2005

본 논문은 스마트 홈과 같이 다양한 센서 및 제어 네트워크가 밀집되어 있는 유비쿼터스 환경 하에서 복잡한 인터페이스의 사용에 대한 사용자의 인지 부담(cognitive load)을 줄이고, 개인화된(personalized) 서비스를 자율적으로 제공하기 위한 새로운 사용자 행동 패턴 선호도 학습기법을 제안하였다. 이를 위해 지식 발견(knowledge discovery)을 위한 평생 학습(life-long learning)의 관점에서 퍼지귀납(fuzzy inductive) 학습 방법론을 제안하며, 이것은 수치 데이터로부터 입력 공간에 대한 효율적인 퍼지 분할(fuzzy partition)을 얻어내고 일관성 있는(consistent) 퍼지 상관 롤(fuzzy association rule)을 얻어내도록 한다.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.895-901
• /
• 2016

Nowadays, the axle counter has been developed to the wide range of the track circuit blocks as well as the wheel detection device. The axle counter, as becoming an important device for the high speed railway, must be guaranteed in accordance with the safety. With considering the safety and the high speed, performance evaluation a wheel detection sensor is described in this paper. To increase the safety, digital proximity sensor instead of analog is employed in the wheel detection sensor. Therefor the wheel detection sensor can minimize noisy signals caused by the harsh railway environments. And, to meet the high speed railway requirements, the performance of the wheel detection sensor is also successfully verified using the speed simulator at the velocity 500Km/h.

• 한국전기전자재료학회논문지
• /
• 제26권3호
• /
• pp.171-176
• /
• 2013

In this paper, we present a MEMS (micro-electro-mechanical system) implantable blood pressure sensor which has designed and fabricated with consideration of size, design flexibility, and wireless detection. Mechanical and electrical characterizations of the sensor were obtained by mathematical analysis and computer aided simulation. The sensor is composed of two coils and a air gap capacitor formed by separation of the coils. Therefore, the sensor produces its resonant frequency which is changed by external pressure variation. This frequency movement is detected by inductive coupling between the sensor and an external antenna coil. Theoretically analyzed resonant frequency of the sensor under 760 mmHg was calculated to 269.556 MHz. Fused silica was selected as sensor material with consideration of chemical and electrical reaction of human body to the material. $2mm{\times}5mm{\times}0.5mm$ pressure sensors fitted to radial artery were fabricated on the substrates by consecutive microfabrication processes: sputtering, etching, photolithography, direct bonding and laser welding. Resonant frequencies of the fabricated sensors were in the range of 269~284 MHz under 760 mmHg pressure.