• Journal of the Society of Disaster Information
• /
• v.13 no.4
• /
• pp.465-475
• /
• 2017

As a result of a survey on households using gas, gas safety accidents have been declining linearly in 2006. However, when analyzing the causes of gas accidents, accidents detail caused by carelessness have increased to 62%It is analyzed that urgent measures are needed. In addition, 7 households per 10 households perceive city gas as safe, but 30% of them recognize that gas safety accidents are likely to occur in their homes in the future. Even though city gas use is relatively safe,It is recognized that there is a risk. Although the perception of the gas safety of the city gas consumers is not related to the age and gender income level, it is analyzed that it is highly educated and experienced direct or indirect gas safety accident, the perception of safety was relatively low. In order to reduce gas safety accidents, the installation of gas safety equipment for elderly households should be continuously supplied. As a result of investigating the disposal costs in case of various disasters, 66% of the insurance costs were found to be highly dependent on insurance. In addition, to reduce gas safety accidents, the installation of gas safety devices for elderly households should be continuously implemented.

• Korean Journal of Remote Sensing
• /
• v.33 no.3
• /
• pp.313-324
• /
• 2017

A lava tube is one of the hot issues of lunar science because it is regarded as a good candidate place for setting a lunar base. Recently much effort has been made to find lunar lava tubes. However, preceding works mainly made use of high-resolution lunar surface image data in conjunction with geomorphological consideration to present some lava tube candidates. Yet, those candidates stay no more than indirect indications. We propose a new data analysis technique of High Frequency (HF) radar observation data to find lunar lava tubes of which location depth is smaller than the range resolution of the radar pulse. Such shallow target echoes cannot be resolved from surface echoes, which presents the different location of the lunar surface compared to that of real lunar surface. The proposed technique instead finds the surface range (distance from LRS to the reflector of the most intense signal) anomaly which occurs as a result of the low range resolution of LRS pulse. We applied this technique to the surface range of Kaguya Lunar Radar Sounder (LRS) data. The surface range was deduced to make LRS surface elevation which was compared with the average surface elevation of Kaguya Digital Terrain Model (DTM). An anomalous discrepancy of the surface elevation was found in the Rima Galilaei area, which suggests the existence of a shallow lava tube.

• Korean Security Journal
• /
• no.29
• /
• pp.59-86
• /
• 2011

The purpose of this study is to investigate the relationship between organizational culture, organizational trust and organizational performance of special guard organization. This study had selected special guards from 4 different private guard companies which are in Seoul area on March 2011. Using Judgement Sampling, 161 samples were drawn for the use of final analysis. Questionnaire used in this study was consisted of the total 42 question, and executed frequency analysis, factor analysis, reliability analysis, correlation analysis, multiple regression analysis, path analysis by SPSSWIN 18.0. The Cronbach's ${\alpha}$ value which represents the reliability of the survey came out to be over .592. The results are following: First, the organizational culture of special guard organization affects organizational trust. That is, when a developmental, reasonable, consensual and hierarchical culture is activated, cognitive emotional and behavioral trust is increased. Second, organizational culture of special guard organization affects organizational performance. That is, when a reasonable and consensual culture is activated, job-satisfaction becomes higher. On the other hand, when a developmental, reasonable and hierarchical culture is activated, organizational flow becomes higher. Third, organizational trust of special guard organization affects organizational performance. That is, when a cognitive emotional and behavioral trust works highly, job-satisfaction and organizational flow is increased. Fourth, Special security organization's organizational culture affects as a result in organization result. As well as organizational culture exerts direct influence on organization outcome, I exert effect that is indirect in organization outcome through action trust which is low rank factor of organization trust.

• Nuclear Engineering and Technology
• /
• v.39 no.1
• /
• pp.31-42
• /
• 2007

Energy supply is increasingly showing up as a major issue for electricity supply, transportation, settlement, and process heat industrial supply including hydrogen production. Nuclear power is part of the solution. For electricity supply, as exemplified in Finland and France, the EPR brings an immediate answer; HTR could bring another solution in some specific cases. For other supply, mostly heat, the HTR brings a solution inaccessible to conventional nuclear power plants for very high or even high temperature. As fossil fuels costs increase and efforts to avoid generation of Greenhouse gases are implemented, a market for nuclear generated process heat will be developed. Following active developments in the 80's, HTR have been put on the back burner up to 5 years ago. Light water reactors are widely dominating the nuclear production field today. However, interest in the HTR technology was renewed in the past few years. Several commercial projects are actively promoted, most of them aiming at electricity production. ANTARES is today AREVA's response to the cogeneration market. It distinguishes itself from other concepts with its indirect cycle design powering a combined cycle power plant. Several reasons support this design choice, one of the most important of which is the design flexibility to adapt readily to combined heat and power applications. From the start, AREVA made the choice of such flexibility with the belief that the HTR market is not so much in competition with LWR in the sole electricity market but in the specific added value market of cogeneration and process heat. In view of the volatility of the costs of fossil fuels, AREVA's choice brings to the large industrial heat applications the fuel cost predictability of nuclear fuel with the efficiency of a high temperature heat source tree of Greenhouse gases emissions. The ANTARES module produces 600 MWth which can be split into the required process heat, the remaining power drives an adapted prorated electric plant. Depending on the process heat temperature and power needs, up to 80% of the nuclear heat is converted into useful power. An important feature of the design is the standardization of the heat source, as independent as possible of the process heat application. This should expedite licensing. The essential conditions for success include: ${\bullet}$ Timely adapted licensing process and regulations, codes and standards for such application and design ${\bullet}$ An industry oriented R&D program to meet the technological challenges making the best use of the international collaboration. Gen IV could be the vector ${\bullet}$ Identification of an end user(or a consortium of) willing to fund a FOAK

• Research in Plant Disease
• /
• v.12 no.2
• /
• pp.144-147
• /
• 2006

Egg yolk immunoglobulin (IgY) is much widely used in medical fields, but its use in serology of plant viruses is much limited. We produced an IgY against pepper mild mottle virus (PMMoV) and applied it to several serological tests. Polyclonal antibodies were obtained from the egg yolk of chicken immunized with a total of 2mg of purified PMMoV over 2 months. The titers of antibodies were measured with the ring-test over six months after the first injection. The highest.titers of IgY was 1/2,560 at 2 months after the first injection. Approximately 60-80 mg of IgY were obtained from one egg yolk. Using the IgY, 1ng/ml of purified PMMoV was detected with the indirect ELISA. Gelrite gel double diffusion test, ELISA and tissue immuno-binding assay employing IgY gave similar sensitivity and specificity to those of IgG developed in rabbit. Therefore, the IgY which can be obtained in large quantities from a chicken, might be useful for the antibody production and the serology of plant viruses.

• The Korean Journal of Nuclear Medicine
• /
• v.24 no.1
• /
• pp.29-36
• /
• 1990

Most of the diagnostic methods currently used for the detection of neoplastic masses provide indirect evidence. To obtain greater specificity in the interpretation of neoplasias by in vivo methods, the immunological approach appears to be most promising. Two problems that interfered with progress in this field were the lack of tumor specific antigen and the lack of well-defined and reproducible antibodies. To improve the sensitivity and specificity of radioimmunoscintigraphy as a technique for tumor localization, the use of monoclonal antibodies, fragments of antibodies and single photon emission computerized tomography (SPECT) are reasonable. The obvious advantages of monoclonal antibodies are their homogeneity, their specificity for the immunizing antigen and the reaction with a single determinant-thus no large immunecomplexes with antigen are formed. Monoclonal antibody technique has recently provided an opportunity to reevaluate the role of nuclear medicine for the diagnosis of malignant diseases by using the immunological approach. Out first results by means of radioimmunoscintigraphy of CEA and CA 19-9 producing tumors using a cocktail of fragments F $(ab')_2$, of mocolonal antibodies to CA 19-9 and CEA labeled with $^{131}I$ (IMACIS-1) are reported. The aims of this investigation was to evaluate the role of immunoscintigraphy in patients with colorectal and other cancers for diagnosis of local recurrences and metastasis. This report contains results of the first 8 colorectal and pancreas cancer patients with the elevation of the level of serum CEA and/or CA 19-9. IMACIS-1 was injected intravenously during 30 minutes in 100 ml saline solution after skin test. Planar scintigrams were recorded 3, 5 and 7 days after the injection of the IMACIS-1. Anterior, lateral and posterior views of the liver as well as anterior and posterior views of the pelvis were obtained in each patients as an $^{131}I-antibody$ image. We were able to localize exactly the malignant process with the double-nuclide double-compound $^{99m}Tc\;^{131}I$ (Tc+l) scintigrams. In Tc & I double-nuclide scintigraphy, computer subtraction display provided more clear localization of the tumor. We compared the results of radioimmunoscintigraphy with CT, ultrasonograms, conventional scintigrams. The results were as follows: 1) The sensitivity and specificity of radioimmunoscintigraphy using the fragments $F(ab')_2$ of the cocktails of CEA and CA 19-9 monoclonal antibodies were 80% and 100% respectively. 2) Tumor detection rate was not proportionated to the level of serum tumor markets. 3) Second tracer technique was essential for tumor localization as an anatomic landmark using double-nuclide scintigraphy. 4) A slow infusion of the antibodies was necessary to prevent the formation of large immune complexes. 5) Tumor/non-tumor radioactivity was most elevated at 7 days delayed imaging. 6) Using planar scintigraphic technique of $^{131}I$ labeled monoclonal antibodies are possible for imaging most of the tumors.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.619-627
• /
• 1996

There are increasing use of composite resin in the posterior teeth and the new indirect inlay technique was introduced for compensating much troubles faced in direct technique. Many researchers insisted that overall properties of restorative materials were enhanced by an additional curing but this technique still has a problems about using cement material. Resin inlay obtains retention force from friction and another adhesion to tooth structure. A shape of cavity preparation was noted but studies about cement thickness and bond strength with cavity divergency are rare. The purpose of this study is to assess the effect of cavity divergency on cement thickness and bond strength of resin inlay. Cavities, which divergency was $6^{\circ}$, $16^{\circ}$, and $26^{\circ}$ in each group, were prepared and their divergency was verified by Adobe Photoshop program through the image capture with stereo microscope and FlexCam. Inlays were fixed into the cavities with a resin cement, Superbond and were handled under chemical (in 75% ethanol for 24 hrs.) and thermal stress (500 cycles from $5^{\circ}$ to $55^{\circ}C$). MXT 70 (x400) was used for measuring the cement thickness and bond strength was evaluated with a universal testing machine. Following results were obtained : 1. The cement thickness in Mean (S.D.) were; 35.58 (10.31)${\mu}m$ in $6^{\circ}$ group, 35.97 (10.49)${\mu}m$ in $16^{\circ}$ group, and 41.43 (9.33)${\mu}m$ in $26^{\circ}$ group. But there was no significant difference between groups. 2. The bond strength in Mean (S.D.) were ; 33.18 (5.53)kg in $6^{\circ}$ group, 23.47 (13.40)kg in $16^{\circ}$ group, and 19.75 (10.48)kg in $26^{\circ}$ group. $6^{\circ}$ group showed significantly higher value compared to $16^{\circ}$ and $26^{\circ}$ groups (p<0.05). Although the results of this study indicate $6^{\circ}$ divergency will be good for resin inlay, cavity preparation with this type will have lots of difficulties in manufacturing, try-in, and cementation procedures, such as deformation. So it is concluded that $16^{\circ}$ divergent cavity preparation is recommended in resin inlay technique.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.299-311
• /
• 2021

The purpose of this study is to analyze the ripple effect of the Chinese education industry on the national economy by using the industry-related table of 2017 by the China Statistical Office to use it as policy data for revitalization of the Chinese education industry in the future. To achieve this purpose, 149 industries in the basic classification of the industry-related table were classified into 32 industries. Based on these classifications, by analyzing the production induction coefficient, sensitivity coefficient, influence coefficient, yield inducement coefficient, production tax induction coefficient, and labor induction coefficient, etc. The purpose of this study is to understand the relationship between different industries and to find out the economic impact of the Chinese education industry. The analysis results show that in 2017, the total production induction coefficient of China's education industry was 1.7188, the row total was 1.0626, the sensitivity coefficient was 0.01211, the influence coefficient was 0.01958, the income induction coefficient was 0.6667, the production tax induction coefficient was 0.035, and the final demand was 1 billion yuan. When this occurs, the labor induction coefficient shows a total of 31,254 persons (indirect 15,541 persons, direct 15,713 persons). Based on the analysis results, this study suggested the implications that government support, technology introduction and application of new operating models, policy regulations, and efficient supervision of the system and president are required for further development of the Chinese education industry.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.27 no.2
• /
• pp.82-96
• /
• 2018

3D printing is a process of producing 3d object from a digital file in STL format by joining, bonding, sintering or polymerizing small volume elements by layer. The various type of 3d printing is classified according to the additive manufacturing strategies. Among the types of 3D printer, SLA(StereoLithography Apparatus) and DLP(Digital Light Processing) 3D printer which use polymerization by light source are widely used in dental office. In the previous study, a full-arch scale 3d printed model is less precise than a conventional stone model. However, in scale of quadrant arch, a 3d printed model is significantly precise than a five-axis milled model. Using $3^{rd}$ Party dental CAD program, full denture, provisional crowns and diagnostic wax-up model are fabricated by 3d printer in dental office. In Orthodontics, based on virtual setup model, indirect bracket bonding tray can be generated by 3d printer. And thermoforming clear aligner can be fabricated on the 3d printed model. 3D printed individual drilling guide enable the clinician to place the dental implant on the proper position. The development of layer additive technology enhance the quality of 3d printing object and shorten the operating time of 3D printing. In the near future, traditional dental laboratory process such as casting, denture curing will be replaced by digital 3D printing.

• The Korean Journal of Franchise Management
• /
• v.12 no.1
• /
• pp.21-34
• /
• 2021

Purpose: This study examines the structural relationship between perceived quality, relationship quality, and revisit intention in the context of coffee shop. In this model, perceived quality consists of product, service, and experience quality, and relationship quality consists of satisfaction, trust, and commitment, and performance consists of revisit intention. More specially, this study identifies whether perceived quality plays a mediating role in the relationship between perceived quality and relationship quality and the direct/indirect effects of perceive quality on intention to revisit. Research design, data and methodology: The survey was conducted from September 1 to 30, 2019. The data were collected from 320 respondents and analyzed using structural equation modeling (SEM) with AMOS program. Results: The findings are as follows. First, quality perception of coffee specialty stores had a statistically positive effect on relationship quality, indicating supports H1. Therefore, customers can know that they are aware of the quality of coffee specialty stores, including quality of service and experience as well as products, and that they form relationship quality with coffee specialty stores. Second, relationship quality between coffee shops and customers had a significant positive effect on performance. Thus, H2 was supported. The results show that if the coffee shop does not consider relationship quality as important, customer loyalty decreases, the number of customers decreases, and the number of customers who switch to another coffee shop increases, which can lead to a threat to the coffee shop. Third, in the case of hypothesis H3, it was found that there was a partial mediating effect of satisfaction and trust between quality perception and reuse intention of coffee specialty stores, so hypothesis H3 was partially supported. As commitment appears to have no mediating effect, it can be said that customers who use coffee shops are not only difficult to maintain as regular customers of a particular coffee shop, but also have ample room to move to other coffee shops. Conclusions: Although many scholars point out the importance of service quality, few studies were conducted in the context of the Korean food service industry (including coffee shops). From this perspective, this study tested several hypotheses that the quality (product, service, experience) perceived by customers can have a positive effect on relationship quality and performance (re-visit intention), either directly or indirectly. The findings of this study demonstrate that if the manager of a coffee shop understands the characteristics of quality perceived by customers and the role of relationship quality, the effect of quality perceptions on customers can be maximized in order to maintain the relationship with customers.