• Bulletin of the Korean Chemical Society
• /
• v.27 no.6
• /
• pp.875-880
• /
• 2006

A new, simple and fast flow injection analysis (FIA) method has been developed for the indirect determination of nitrite. The proposed indirect automatic method is based on the oxidation of nitrite to nitrate using a lead(IV) dioxide oxidant microcolumn where the flow of the sample through the microcolumn reduces the $PbO_2$ solid phase reagent to Pb(II), which is measured by flame atomic absorption spectrometry. The absorbance of Pb(II) are proportional to the concentration of nitrite in the samples. The calibration curve was linear up to 30 mg $L ^{-1}$, with a detection limit of 0.11 mg $L ^{-1}$ for a 400 mL injected sample volume and a sampling rate of about 80 $h ^{-1}$. The results exhibit no interference from the presence of large amounts of ions. The developed procedure was found to be suitable for the determination of nitrite in foodstuffs and wastewaters. A relative standard deviation better than 0.9% was obtained in a repeatability study. The reliability of the method was established by parallel determination against the standard method.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.3
• /
• pp.22-27
• /
• 2007

The source flow ripple and the source impedance in hydraulic pump are characteristic values showing fluid-borne vibration characteristics decisively. We cannot measure these two characteristic values directly, but can measure them by some indirect methods. One representative indirect measuring method is ISO 10767-1. The authors constructed a hardware and a software for the measuring method based on ISO 10767-1. Through the error evaluation of the measured results, accuracy of the measuring method using ISO 10767-1 was examined in detail.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.10
• /
• pp.967-974
• /
• 2011

The direct and indirect PFBEM(power flow boundary element method) for the treatment of the 3 dimensional multi-domain problems are proposed to predict the acoustic energy density in medium to high frequency ranges. In the proposed method, the equation is derived in a matrix form by considering coupled relationships of the power flow at the interface of given domains. The proposed method can successfully obtain the analytical solutions for the problems of coupled cubes and the small-scale reverberant chamber. Then the experiment is carried out to obtain STL(sound transmission loss) by using small-scale reverberant chamber and the results are compared with analysis results.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.3
• /
• pp.392-403
• /
• 2013

For the analysis of radiating noise problems in medium-to-high frequency ranges, the Energy Flow Boundary Element Method (EFBEM) was developed. EFBEM is the analysis technique that applies the Boundary Element Method (BEM) to Energy Flow Analysis (EFA). The fundamental solutions representing spherical wave property for radiating noise problems in open field and considering the free surface effect in underwater are developed. Also the directivity factor is developed to express wave's directivity patterns in medium-to-high frequency ranges. Indirect EFBEM by using fundamental solutions and fictitious source was applied to open field and underwater noise problems successfully. Through numerical applications, the acoustic energy density distributions due to vibration of a simple plate model and a sphere model were compared with those of commercial code, and the comparison showed good agreement in the level and pattern of the energy density distributions.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.5
• /
• pp.217-222
• /
• 2013

Return-Oriented Programming(ROP) is an advanced code-reuse attack like a return-to-libc attack. ROP attacks combine gadgets in program code area and make functions like a Turing-complete language. Some of previous defense methods against ROP attacks show high performance overhead because of dynamic execution flow analysis and can defend against only certain types of ROP attacks. In this paper, we propose Indirect Branch Target Address Verification (IBTAV). IBTAV detects ROP attacks by checking if target addresses of indirect branches are valid. IBTAV can defends against almost all ROP attacks because it verifies a target address of every indirect branch instruction. Since IBTAV does not require dynamic execution flow analysis, the performance overhead of IBTAV is relatively low. Our evaluation of IBTAV on SPEC CPU 2006 shows less than 15% performance overhead.

• Proceedings of the SAREK Conference
• /
• 2005.06a
• /
• pp.102-102
• /
• 2005

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.5
• /
• pp.881-893
• /
• 2020

CFI(Control Flow Integrity) is a mitigation mechanism that protects programs by verifying control flows. IFCC(Indirect Function Call Checks) and SCS(Shadow Call Stack), CFI supported by LLVM Clang compiler, were introduced to protect applications in Android. IFCC protects function calls and SCS protects function returns. In this paper, we propose attacks to bypass CFI on the application environment with IFCC and SCS. Even if IFCC and SCS were applied to user applications, it was confirmed that there were many code segments not protected by IFCC and SCS in the application memory. We execute code in CFI unprotected segments to construct 1) bypassing IFCC to call a protected function, 2) modulating return address via SCS bypass. We identify code segments not protected by IFCC and SCS in Android10 QP1A. 191005.007.A3. We also implement proof-of-concept exploits to demonstrate that modulation of control flow is possible in an environment where IFCC and SCS are applied.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.2
• /
• pp.69-76
• /
• 2012

The purpose of the study is to identify the relationship among the variables related learner's satisfaction, flow experience and self-directedness and verify the path model of causal relationship among those variables in web based computer e-learning. Based on the theoretical rationale, we hypothesized the path model including learner's satisfaction as outcome variable, flow experience and self-directedness as causal and mediating variables. A total of 193 students were participated in this study and the main results showed as follows: 1. Learner's self-directedness showed significant (p<.01), indirect effect on learner's satisfaction mediated by flow experience and the flow experience showed significant (p<.01), direct effect on learner's satisfaction; 2. Among 7 constructs of self-directedness, 'creative approach', 'love of learning', 'self-confidence as a learner' showed significant (p<.01), indirect effects on learner's satisfaction mediated by 'clear goals' construct among flow experience.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.12 no.1
• /
• pp.77-82
• /
• 1975

An analytical formulation of obtaining propeller sections for a given vortex system of radial and chordwise distribution is given as an indirect problem of tracing the propeller surface. The formulation satisfies the boundary condition of potential flow exactly rather than previous approximate use of induced streamline curvatures at the zero camber line.

• Clinical and Experimental Pediatrics
• /
• v.55 no.11
• /
• pp.408-413
• /
• 2012

Moyamoya disease (MMD) is the most common pediatric cerebrovascular disease in Far Eastern countries. In children, MMD frequently manifests as ischemic symptomatology. Cerebral perfusion gradually decreases as the disease progresses, which often leads to cerebral infarction. The benefits of revascularization surgery, whether direct or indirect, have been well established in MMD patients with ischemic symptoms. In adults, the increase in cerebral blood flow achieved with indirect revascularization is often unsatisfactory, and direct revascularization is usually feasible. In children, however, direct revascularization is frequently technically not feasible, whereas the response to indirect revascularization is excellent, although 1 or 2 weeks are required for stabilization of symptoms. The authors describe surgical procedures and perioperative care in indirect revascularization for MMD. In addition, special considerations with regard to very young patients, patients with recent cerebral infarction, and patients with hyperthyroidism are discussed.